Skip to content

Bolivia · La Paz

Remote Hands in La Paz

Remote Hands in La Paz means Reboot Monkey engineers carry out physical tasks in the data center on your instruction: reboots, cable checks, component swaps and visual checks. It is on-site IT support in La Paz data centers for teams that run their equipment from elsewhere.

Remote Hands

  • 8

    services detailed for La Paz

  • 1

    agreement for every city

Request Remote Hands in La Paz

Tell us the task, the equipment and the facility, and Reboot Monkey will quote the work.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in La Paz

When your servers and network equipment sit in a La Paz data center and your own staff are somewhere else, someone has to touch the hardware. Reboot Monkey dispatches a field engineer to the facility to carry out the task you specify. You decide what is done and in what order; the engineer executes it at the rack and reports back. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters, so the work is performed in the building you already use or plan to use. In practice this means access to your cage or rack follows the operator's procedures, and your instruction to Reboot Monkey is the only thing the engineer acts on inside it. A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the primary engineer cannot attend, the backup already knows the site, so your request does not wait on a fresh introduction to the facility.

Datacenter Facilities in La Paz

Data centres in La Paz, ordered by the number of networks present:

  • PIT Bolivia (Pit Bolivia Entidad Civil Sin Fines de Lucro), Calle 13 Calacoto No. 8142, 10204 La Paz: 2 networks

Our Remote Hands Services

Remote hands is defined by its scope: physical tasks carried out on the customer's instruction. The work does not require diagnostic judgement from the engineer, because you or your team supply the diagnosis. The tasks it covers are:

  • Reboots: power-cycling a server or switch that has stopped responding, at your instruction.
  • Cable checks: tracing, reseating and confirming patch cables and connections in your rack.
  • Component swaps: replacing a part you have identified as faulty, such as a drive or module.
  • Visual checks: reading LEDs, panel states and equipment condition and reporting what is seen.

Why Reboot Monkey

A request starts with your instruction. You describe the task, the equipment and its position in the rack. Because the engineer is working from your instruction, the result matches what you asked for, and the report gives you a record of it. When a job goes beyond physical tasks, the work changes category. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, and installing, mounting and cabling new hardware is rack and stack. Moving equipment between racks, rooms or facilities is server migration, and removing and disposing of retired hardware is data center decommissioning. Reboot Monkey covers each of these, so a simple reboot request can grow into a larger project with the same provider. Connectivity follows the same pattern. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A fibre inspection scope and cleaning kit are available on request, which matters when a link problem turns out to be a dirty connector rather than a failed transceiver. Reboot Monkey is vendor-neutral. The engineer works on the equipment you own, whatever it is, and does not steer you toward a particular manufacturer. Prices are quoted on request and depend on the customer and the size of the job, so the quote reflects your actual scope.

How Reboot Monkey Works

These terms apply in every facility in La Paz where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in La Paz?

Remote hands covers physical tasks that Reboot Monkey engineers carry out in the data center on your instruction. That includes reboots, cable checks, component swaps and visual checks. You supply the diagnosis and the task, and the engineer performs it at your rack and reports the result. Work needing diagnostic judgement is smart hands instead.

Do you provide on-site IT support in La Paz data centers?

Yes. A Reboot Monkey field engineer attends the facility, works under the operator's site rules and carries out the task you instruct at your rack. A second, briefed engineer is named as backup for every customer site. Prices are quoted on request and depend on the customer and the size of the job.

Do you work in every datacenter in La Paz?

Reboot Monkey engineers work in any facility in La Paz where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in La Paz?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in La Paz?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Remote Hands in La Paz

Tell us the task, the equipment and the facility, and Reboot Monkey will quote the work.

Published:

Get a quote