Skip to content

Costa Rica · San Jose

Rack and Stack in San Jose

Rack and stack in San Jose means installing, mounting and cabling new hardware in a rack inside a data centre that another company owns and runs. Reboot Monkey engineers carry out the work on site, including cabling, labelling and power-on checks.

In Rack and Stack

Rack and Stack

  • 7

    services detailed for San Jose

  • 1

    agreement for every city

Plan your rack and stack in San Jose

Send the hardware list and rack layout, and Reboot Monkey will quote the installation.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in San Jose

CRIX stands on NIC Costa Rica in San Jose. For a buyer placing new servers, switches or storage in the city, the question is who will physically install the hardware, and under whose rules. Reboot Monkey is a third-party datacenter services operator. It does not own the building and it is not a hosting company, so the hardware you install stays yours and the racks stay inside a facility run by someone else. Rack and stack is the installation stage of a hardware deployment: unpacking, mounting, cabling and bringing equipment to a powered-on state. It sits between procurement and production. Equipment arrives at the facility, a Reboot Monkey engineer is dispatched to the customer's rack, and the work is done to the instructions you provide. Reboot Monkey engineers work in 190 countries and more than 400 locations as of 2026, and the same way of working applies in San Jose as elsewhere. Because the engineer works to your instructions, the useful preparation is a clear rack layout, port and cable maps, and the labelling scheme you want applied. With those in hand, the installation is a defined task rather than an open-ended visit, and the quote can be tied to the size of the job.

Datacenter Facilities in San Jose

Data centres in San Jose, ordered by the number of networks present:

  • CRIX, NIC Costa Rica, 10118 San Jose: 5 networks
  • Rack Lodge Data Center, 38 Avenida 0 Paseo Colón, 1000 San Jose: 1 network
  • Critical Colocation, Av. 10, Calles 13 y 15, 10102 San Jose
  • Navégalo Data Center Costa Rica (CR1), Second Floor Centro Colon Building, 10000 San Jose

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks; quotes are on request. In practice a job follows a fixed sequence, and each step produces something you can check afterwards.

The work in the rack covers these steps:

  • Mounting: new servers, switches and other hardware are installed in the rack position you specify.
  • Cabling: Reboot Monkey engineers install and patch the cabling in your rack, following the port map you supply.
  • Labelling: cables and equipment are labelled so that later remote hands or smart hands work, and any future audit of the rack, starts from a readable layout.
  • Power-on checks: once the hardware is connected, the engineer checks that it powers on and reports the result to you.
  • Fibre inspection: a fibre inspection scope and cleaning kit are available on request, for links that need the end faces checked before they are patched.

Why Reboot Monkey

Reboot Monkey sells the network for the rack as well as the installation. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A buyer therefore deals with one party for the physical work and the connectivity that the new hardware needs, instead of coordinating the installer, the operator and the carrier separately.

Every customer site has a named backup. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a deployment does not depend on one person being available on the day.

Where the work goes beyond installation, the other services are defined the same way across locations. Remote hands covers physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. Server migration moves equipment between racks, rooms or facilities. Prices are quoted on request and depend on the customer and the size of the job, so the quote reflects the work you actually need.

How Reboot Monkey Works

These terms apply in every facility in San Jose where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in San Jose?

Rack and stack covers installing, mounting and cabling new hardware in your rack, along with labelling and power-on checks. Reboot Monkey engineers do the work on site, inside a facility that another company owns and runs, under that operator's site rules. Quotes are on request and depend on the customer and the size of the job.

Do you work in every datacenter in San Jose?

Reboot Monkey engineers work in any facility in San Jose where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in San Jose?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in San Jose?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your rack and stack in San Jose

Send the hardware list and rack layout, and Reboot Monkey will quote the installation.

Published:

Get a quote