Skip to content

Cyprus · Limassol

Data Center Decommissioning in Limassol

Reboot Monkey removes and disposes of retired servers, switches and storage arrays from customer racks in Limassol. Each item is logged as it leaves the rack and checked against the customer's asset list, with removal scheduled in advance around the facility's rules.

In Data Center Decommissioning

Data Center Decommissioning

  • 8

    services detailed for Limassol

  • 1

    agreement for every city

Plan a decommissioning job in Limassol

Send the asset list and the facility's access requirements, and Reboot Monkey will schedule the removal with you.

In depth

Data Center Decommissioning: 6 sections, open any to read more.

Data Center Decommissioning in Limassol

IPTP, Kermia 1 Limassol, Cyprus stands on Evagora Pallikaridi in Limassol. Decommissioning in a shared facility is a controlled removal job, not a clearance. The equipment sits in racks that belong to the customer, inside a building that belongs to someone else, and the work has to respect both. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Reboot Monkey is a third-party datacenter services operator. It does not own or run the data centre, and it is not a hosting company, so the removal is planned around the customer's retired hardware and the operator's access conditions rather than around any hosting contract of its own.

A decommissioning job usually follows a hardware refresh, a migration to another facility, or the end of a lease. In each case the customer needs two things at the end: the racks emptied as agreed, and a clear record of what left them. The sections below set out what the work covers and how it is handled from the first request to the last item removed.

Datacenter Facilities in Limassol

Data centres in Limassol, ordered by the number of networks present:

  • IPTP, Kermia 1 Limassol, Cyprus (IPTP Networks), Evagora Pallikaridi, Kermia Court 1, 3106 Limassol: 4 networks

Our Data Center Decommissioning Services

Data center decommissioning is the removal and disposal of retired hardware. In Limassol the work covers servers, switches, storage arrays, and their cabling and rail kits, so a rack is left clear and not half-stripped.

The handling of a job follows a fixed order:

  • Before any removal, serial numbers, asset tags and rack positions are recorded against the customer's asset list, so every device can be matched to a line the customer already holds.
  • Removal is scheduled with the customer in advance, including any out-of-hours or weekend windows the facility requires.
  • On the day, every item is logged as it is removed, which gives the customer a running record that can be compared with the asset list afterwards.
  • A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the job does not depend on one person being available.

Why Reboot Monkey

Retired hardware often leaves a facility alongside other work: moving live equipment between racks, rooms or facilities, installing and cabling replacement hardware, or ordering the cross connects and carrier circuits that the new setup needs. Reboot Monkey handles these as related services under the same engineering approach, so a decommissioning job can sit next to a server migration or a rack and stack job without the customer coordinating separate suppliers for each step.

Where retired equipment also needs data wiping, on-site shredding or degaussing, collection and transport, or resale and buyback, that is IT asset disposition (ITAD). It is processed by Reboot Monkey staff, either in a partner's processing facility or on the customer's site, and resale or buyback is quoted case by case. Prices for decommissioning are quoted on request and depend on the customer and the size of the job.

For teams that need to scope a clear-out, the useful starting point is the asset list: the more complete it is, the more precisely the removal window and the number of engineers can be planned. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, and the same recording and logging practice applies on each job. To plan a removal in Limassol, send the asset list and the facility's access requirements with the request, and Reboot Monkey will schedule the work with you.

How Reboot Monkey Works

These terms apply in every facility in Limassol where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

Frequently Asked Questions

What does data center decommissioning cover in Limassol?

It covers the removal and disposal of retired hardware: servers, switches, storage arrays, and their cabling and rail kits. Serial numbers, asset tags and rack positions are recorded against the customer's asset list, removal is scheduled in advance including any out-of-hours or weekend windows the facility requires, and every item is logged as it is removed.

Do you work in every datacenter in Limassol?

Reboot Monkey engineers work in any facility in Limassol where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Limassol?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with data center decommissioning in Limassol?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center decommissioning work is scheduled under the operator's rules.

Plan a decommissioning job in Limassol

Send the asset list and the facility's access requirements, and Reboot Monkey will schedule the removal with you.

Published:

Get a quote