
Photo: © Steffen Schmitz (Carschten) / Wikimedia Commons · CC BY-SA 4.0 · cropped · source
Italy · Milan
Data Center Migration in Milan
Reboot Monkey moves servers, storage and network equipment between racks, rooms and facilities in Milan. Its field engineers carry out the physical move, either as the whole project or alongside your own team, and a second briefed engineer is named as backup for every customer site.
In Data Center Migration
- Data Center Migration
- Colocation
- Data Center Decommissioning
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Data Center Migration
8
services detailed for Milan
1
agreement for every city
Plan your data center migration in Milan
Send your current rack layout, the destination and your target dates. Reboot Monkey quotes the job on request.
In depth
Data Center Migration: 7 sections, open any to read more.
Data Center Migration in Milan
MIX, the Milan Internet eXchange, is a not-for-profit internet exchange point based in Milan and founded in 2000. Milan is considered Italy's economic capital, and its metropolitan area accounts for about 20% of the country's GDP. Its business district hosts Borsa Italiana, Italy's main stock exchange, and the headquarters of numerous national corporations. For a company with equipment in the city, a move between facilities is a routine infrastructure decision, and the physical side of it needs careful planning.
MIX DC CALDERA stands on via Caldera in Milan. Whichever building your equipment leaves or enters, Reboot Monkey does not own or run it. Reboot Monkey sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. A migration in Milan therefore starts from the equipment you have and the place it needs to go, and the work is scoped around those two points.
In Reboot Monkey's definition, server migration means moving equipment between racks, rooms or facilities. Data center migration applies that to a whole estate: a set of racks, a room or a full site, handled as a single project with one plan.
Datacenter Facilities in Milan
Data centres in Milan, ordered by the number of networks present:
- MIX DC CALDERA (MIX s.r.l.), via Caldera, 21, Building Orange 3, 20153 Milan: 265 networks; carriers Airbeam Carrier, Arelion, Core-Backbone, Fiber 23, IONIAN and others
- Retelit Avalon 1 (Retelit S.p.A.), Via Caldera 21, 20153 Milan: 141 networks; carriers Arelion, Aristo Networks, Core-Backbone, EXA Infrastructure, Global Secure Layer and others
- Seeweb Milano Caldera (Seeweb Srl), Via Caldera 21, Edificio B, 20153 Milan: 61 networks; carriers Inter.link, Naquadria, RETN, Telehouse AD, moji and others
- Equinix ML2 - Milan, Savona (Equinix, Inc.), Via Savona 125, 20144 Milan: 43 networks; carriers Global Secure Layer and euNetworks
- C21 (CDLAN SpA), Via Caldera 21, 20153 Milan: 33 networks; carriers Airbeam Carrier, Arelion, Inter.link and RETN
- Equinix ML5 - Milan (Equinix, Inc.), Via Marisa Bellisario, 20019 5 Settimo Milanese: 25 networks; carriers Arelion, EXA Infrastructure, Global Secure Layer, euNetworks and i3D.net
- EXA Edge DC Milan (EXA Infrastructure), Via Caldera 21, 20153 Milan: 10 networks; carriers EXA Infrastructure, Inter.link, Naquadria and euNetworks
- Telnet Caldera Milan, Via Caldera 21 - Easy Point (Building F), 20153 Milan: 10 networks; carriers Airbeam Carrier, Inter.link and Naquadria
- Equinix ML3 - Milan, Basiglio (Equinix, Inc.), Via Francesco Sforza 13, Basiglio, 20080 Milan: 8 networks; carriers Global Secure Layer
- Retelit Avalon 3 (Retelit S.p.A.), Via Bisceglie 95, 20152 Milano MI: 8 networks; carriers Aristo Networks, RETN and Retelit
Our Data Center Migration Services
A migration is a sequence of physical jobs, and Reboot Monkey engineers handle each one on site. The scope of a project is agreed with you before work begins, and the steps below are the ones most migrations contain.
- Removal: equipment is taken out of the racks at the origin site and prepared for transport.
- Transport: hardware moves between racks, rooms or facilities as agreed for the project.
- Installation: equipment is mounted and cabled in its new racks, which is the rack and stack work of installing, mounting and cabling hardware.
- Connectivity: Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in your rack.
- Handover: you receive confirmation that the equipment is in place and cabled, so your team can test and bring services up.
- Retired hardware: equipment that does not make the move can be removed and disposed of as data center decommissioning, and IT asset disposition covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case.
Why Reboot Monkey
Reboot Monkey can run the whole physical move or work alongside your own team. Who disconnects, reconnects and tests the equipment is agreed per project, so a team that wants to keep control of the cutover can do so, and a team without spare hands can hand the whole job over. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the project does not depend on one person being available on the day. Because the same field engineering applies at both ends of a move, a migration that leaves Milan for another location, or arrives here from elsewhere, can be planned as one project. Prices are quoted on request and depend on the customer and the size of the job. To scope a move, send the current rack layout, the destination and the target dates, and the quote follows from those.
How Reboot Monkey Works
These terms apply in every facility in Milan where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Data Center Migration
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Related Services
A migration usually touches other work. If new equipment arrives with the move, Rack and Stack in Milan covers installing, mounting and cabling it. When only part of an estate needs to change location, Server Migration in Milan handles individual servers and racks.
If the destination is a new rack space, Colocation in Milan is where it is arranged. Once the move is done, Data Center Decommissioning in Milan removes and disposes of the hardware left behind.
For the days around the cutover, Smart Hands in Milan brings technical work that needs diagnostic judgement and configuration knowledge, and Remote Hands in Milan carries out physical tasks such as reboots and cable checks on your instruction.
Frequently Asked Questions
What does data center migration cover in Milan?
It covers the physical move of servers and network equipment between racks, rooms or facilities in Milan, including removal, transport, installation and cabling in the new racks. Reboot Monkey can run the whole physical move or work alongside your team, and who disconnects, reconnects and tests the equipment is agreed per project.
Do you work in every datacenter in Milan?
Reboot Monkey engineers work in any facility in Milan where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Milan?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with data center migration in Milan?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center migration work is scheduled under the operator's rules.
Plan your data center migration in Milan
Send your current rack layout, the destination and your target dates. Reboot Monkey quotes the job on request.