Skip to content
The long arched stone aqueduct of Santiago de Queretaro crossing the city, with colourful hillside houses and towers above

Photo: Carlos Valenzuela · CC BY-SA 4.0 · source

Mexico · Queretaro

Smart Hands in Queretaro

Smart hands is technical work inside a data center that needs diagnostic judgement and configuration knowledge, beyond a reboot or a cable check. Reboot Monkey engineers carry out this work in Queretaro on your instruction, inside facilities that other companies own and run, so you do not need staff on site.

Smart Hands

  • 8

    services detailed for Queretaro

  • 1

    agreement for every city

Request Smart Hands in Queretaro

Describe the task and the site, and Reboot Monkey will confirm the scope and quote the job.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Queretaro

Ascenty QRO01 - Querétaro stands on Camino a Nativitas in Queretaro. A buyer who places equipment in the city usually needs more than a pair of hands at the rack: a failed link has to be traced, a replaced component has to be configured, and a changed setup has to be checked against what the customer intended. That is the work smart hands covers. It is technical work that needs diagnostic judgement and configuration knowledge, and it sits one step above remote hands, which covers physical tasks carried out on the customer's instruction such as reboots, cable checks, component swaps and visual checks. Reboot Monkey is a third-party datacenter services operator. It does not own or run the data centers where this work happens, and it is not a hosting company. For a CTO or IT Director, the practical result is one accountable party for the hands-on work in Queretaro, whichever facility your equipment sits in. On-site IT support in Queretaro data centers starts with a request from you. You describe the symptom or the change, and the engineer assigned to your site works from that instruction. Prices are quoted on request and depend on the customer and the size of the job.

Datacenter Facilities in Queretaro

Data centres in Queretaro, ordered by the number of networks present:

  • Ascenty QRO01 - Querétaro (Ascenty DataCenters e Telecom), Camino a Nativitas 800, 76295 Colón, Vesta Park Querétaro I, Queretaro: 13 networks; carriers Cirion and EdgeUno
  • Ascenty QRO02 - Querétaro (Ascenty DataCenters e Telecom), Carretera Estatal 100, km 17.5, Municipio Colón, 76270 Queretaro: 10 networks; carriers Cirion and EdgeUno
  • EdgeUno Datacenter Queretaro Mexico (QRO1) (EdgeUno, Inc.), Parque Industrial, Privada de la Princesa 4, el Marques, 76246 Queretaro: 7 networks; carriers EdgeUno
  • Triara Queretaro (Triara Mty), Epigmenio González 2, Industria del Hierro, 76168 Santiago de Querétaro: 7 networks; carriers Cirion and EdgeUno
  • EdgeUno Datacenter Mexico (QRO2) (EdgeUno, Inc.), Epigmenio González No. 2 Col. Claustros del Parque., 76158 Queretaro: 2 networks; carriers EdgeUno
  • EdgeUno Datacenter Queretaro Mexico (QRO2) (EdgeUno, Inc.), Querétaro, México - Epigmenio González No. 2 Col. Claustros del Parque., 00000 Queretaro: 1 network
  • EdgeUno Datacenter Queretaro Mexico (QRO3) (EdgeUno, Inc.), Cerrada de la Princesa, El Marques Industrial Park, 76246 Queretaro: 1 network
  • RedIT Queretaro (ATC HOLDING FIBRA MEXICO), Fray Luis de León 8002 Edif. B Piso 1, Colinas del Cimatario, 76090 Queretaro

Our Smart Hands Services

Smart hands work in Queretaro follows the same pattern whatever the task: you give the instruction, a Reboot Monkey engineer carries it out at the rack, and you receive confirmation of what was done. The scope below is what the engineers handle, using the service definitions Reboot Monkey applies across its work.

Because Reboot Monkey also sells the network for the rack, the engineer who works on your cabling is part of the same operation that arranges your connectivity. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in your rack. That keeps the ordering and the physical patching with one party, so a link problem is not passed between suppliers.

Where the task involves fibre, a fibre inspection scope and cleaning kit are available on request, which matters when a link is up but unstable and the cause is a dirty or damaged connector rather than a configuration fault.

  • Diagnosis at the rack: tracing a fault in servers, network equipment or cabling and reporting what was found.
  • Configuration work that needs knowledge of the equipment, beyond a physical reboot or component swap.
  • Cabling and patching in your rack, including cross connects ordered from the facility operator and carriers.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Remote hands tasks when you need only a physical action: reboots, cable checks, component swaps and visual checks.

Why Reboot Monkey

Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centers that other companies own and run. Smart hands is one part of that range, so the engineer who supports your equipment works alongside the team that supplied or connected it.

Every customer site has a second, briefed Reboot Monkey engineer named as backup, so a request does not depend on one person being available. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, which means a company with equipment in Queretaro and elsewhere can use one supplier for the hands-on work instead of contracting site by site.

The NOC adds hardware monitoring of your servers and network equipment, so a fault can be identified before a request is raised. Rack and stack, server migration, data center decommissioning and IT asset disposition are available from the same operator when a project moves beyond a single fix. Request a quote and describe the job and the site, and Reboot Monkey will confirm the scope.

How Reboot Monkey Works

These terms apply in every facility in Queretaro where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Queretaro?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, such as tracing a fault, configuring replaced components and checking cabling against your intended setup. Reboot Monkey engineers carry it out in the customer's rack in Queretaro. Simple physical tasks like reboots, cable checks and component swaps fall under remote hands, which is a separate, related service.

Do you provide on-site IT support in Queretaro data centers?

Yes. Reboot Monkey engineers work on site in Queretaro data centers on your instruction, installing and patching cabling in your rack, carrying out diagnostics and handling configuration tasks. Prices are quoted on request and depend on the customer and the job.

Do you work in every datacenter in Queretaro?

Reboot Monkey engineers work in any facility in Queretaro where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Queretaro?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Queretaro?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Queretaro

Describe the task and the site, and Reboot Monkey will confirm the scope and quote the job.

Published:

Get a quote