Skip to content

Morocco · Casablanca

Server Migration in Casablanca

Server migration is the physical move of equipment between racks, rooms or facilities. In Casablanca, Reboot Monkey engineers carry out the move inside the data centres where your hardware already runs, as the whole project or alongside your own team.

Server Migration

  • 8

    services detailed for Casablanca

  • 1

    agreement for every city

Plan your move in Casablanca

Send the equipment list, the origin and destination, and the split of responsibilities you prefer. Prices are quoted on request.

In depth

Server Migration: 6 sections, open any to read more.

Server Migration in Casablanca

HOSTOWEB CASA#1 stands on Nouacer in Casablanca. A migration in this city usually starts from a plain operational question: equipment has to leave one rack, room or facility and arrive in another, powered up, cabled and tested, without the buyer having to coordinate every physical step themselves. Reboot Monkey is a third-party datacenter services operator. It does not own or run the data centres it works in, and it is not a hosting company. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them. That position matters for a move. Because Reboot Monkey is independent of the buildings, a migration can run between two facilities, between rooms in one facility, or between racks in a single room, and the same engineering approach applies to each. The network side travels with the hardware. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack. For a move, that means the new rack can be prepared for connectivity ahead of the cutover rather than after the servers have already arrived.

Datacenter Facilities in Casablanca

Data centres in Casablanca, ordered by the number of networks present:

  • HOSTOWEB CASA#1, Nouacer, Casablanca: 2 networks
  • N+ONE DATACENTERS (NPONE), 2 Rue Lakarari, 20000 Casablanca

Our Server Migration Services

Server migration, as Reboot Monkey defines it, is moving equipment between racks, rooms or facilities. The scope of each project is set before work begins, and the first decision is who does what. Reboot Monkey can run the whole physical move or work alongside the customer's own team. Who disconnects, reconnects and tests the equipment is agreed per project, so a customer that wants to keep its own administrators on the cutover can do so, and a customer that wants the entire physical sequence handled can hand it over. A typical request moves through these stages: 1. The customer describes the equipment, its current location and its destination, and Reboot Monkey scopes the job against that description. 2. The split of responsibilities is agreed: disconnection, transport where it applies, reconnection and testing. 3. 4. Equipment is reconnected and tested in the new location, and the network cabling is patched in the customer's rack. Migration sits next to the neighbouring services that often accompany it. New hardware that arrives as part of the move is installed, mounted and cabled as rack and stack work. Retired hardware left behind can be removed and disposed of through data center decommissioning. Routine physical tasks after the cutover, such as reboots, cable checks and visual checks, are covered by remote hands, and work that needs diagnostic judgement and configuration knowledge is covered by smart hands. Once the equipment is live in its new home, the Reboot Monkey NOC can monitor the customer's servers and network equipment. Prices are quoted on request and depend on the customer and the size of the job.

  • Moves between racks, rooms or facilities
  • Full physical move run by Reboot Monkey, or shared work with your own team
  • Cross connects and carrier circuits ordered for the destination rack
  • Cabling installed and patched by Reboot Monkey engineers in your rack

Why Reboot Monkey

A migration is a bounded piece of work with a hard edge: equipment is live in one place until it is live in another. The practical question for a CTO or IT director is whether the people doing the physical work are briefed, accountable and independent of the building. Reboot Monkey answers that with how it organises the work itself. A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the primary engineer is unavailable on the day of a move, the backup already knows the site and the job, so the schedule does not depend on one person. Roles are also written down per project rather than assumed, which keeps disconnection, reconnection and testing from falling between your team and the engineers. Reboot Monkey works across many operators rather than inside one. For a company that is consolidating or relocating equipment across more than one site, that means one provider can take the physical work in both the origin and the destination, instead of the buyer arranging separate local contractors for each end of the move. Procurement teams also get a clear commercial path. Prices are quoted on request, based on the customer and the size of the job, so the quote reflects your actual equipment and scope. To start, send the equipment list, the origin and destination, and your preferred split of responsibilities, and Reboot Monkey will scope the move from there.

How Reboot Monkey Works

These terms apply in every facility in Casablanca where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Server Migration

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does server migration cover in Casablanca?

Server migration covers moving equipment between racks, rooms or facilities. Reboot Monkey can run the whole physical move or work alongside your own team, and who disconnects, reconnects and tests the equipment is agreed per project. Engineers work under the facility operator's site rules, and cabling in your rack is installed and patched by Reboot Monkey engineers.

Do you work in every datacenter in Casablanca?

Reboot Monkey engineers work in any facility in Casablanca where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Casablanca?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with server migration in Casablanca?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the server migration work is scheduled under the operator's rules.

Plan your move in Casablanca

Send the equipment list, the origin and destination, and the split of responsibilities you prefer. Prices are quoted on request.

Published:

Get a quote