Skip to content

Myanmar · Yangon

Remote Hands in Yangon

Remote hands in Yangon means physical tasks carried out in your rack on your instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers work inside the data center that hosts your equipment, so you do not need to travel to Myanmar. The same engineers can also provide on-site IT support in Yangon data centers when a fault needs diagnosis.

Remote Hands

  • 8

    services detailed for Yangon

  • 1

    agreement for every city

Need hands at your rack in Yangon?

Send the task and the rack location. Prices are quoted on request and depend on the customer and the size of the job.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in Yangon

Myint & Associates Data Center stands on Vantage Tower in Yangon. Companies that run servers, network equipment or storage in the city often have no staff nearby, and a stuck server or a loose patch cable still needs a person at the rack. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centers that other companies own and run. It is not a hosting company and does not own datacenters. Remote hands is the simplest of those services. You describe the task, a Reboot Monkey engineer goes to your rack and carries it out, and you receive confirmation of what was done. Reboot Monkey's field engineers work in 190 countries and more than 400 locations as of 2026, which is the scale behind the process described below.

Datacenter Facilities in Yangon

Data centres in Yangon, ordered by the number of networks present:

  • Myint & Associates Data Center (Myint & Associates Telecommunications Ltd.), Vantage Tower, 623 Pyay Road, 11041 Yangon: 1 network
  • Golden Myanmar Business Exchange (Golden TMH Telecom Co. Ltd), U Shwe Bin Street Industrial Zone, East Dagon Township, 11451 Yangon

Our Remote Hands Services

Remote hands covers physical tasks carried out on your instruction. Where a job needs more than instruction-following, the neighbouring services take over, so you can match the work to the right level of skill from the start.

  • Remote hands: reboots, cable checks, component swaps and visual checks, carried out on your instruction.
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge, for faults where the cause is not yet known.
  • Rack and stack: installing, mounting and cabling new hardware in your rack.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Hardware monitoring: monitoring of your servers and network equipment by the Reboot Monkey NOC, so a fault can be raised before you ask for a visit.
  • Data center decommissioning and IT asset disposition: removal of retired hardware, with data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case.

Why Reboot Monkey

A request to Reboot Monkey follows a fixed path. You send the task and the rack location. The work is assigned to an engineer, and a second, briefed Reboot Monkey engineer is named as backup for every customer site, so a single absence does not leave your rack without cover. The engineer carries out the task in your rack and reports back what was done.

The network side is handled the same way. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack. If a link fault is suspected, a fibre inspection scope and cleaning kit are available on request, so a dirty connector can be ruled in or out without a separate trip.

Because Reboot Monkey is a third-party operator and not the owner of the building, the work is not tied to one hosting product or one facility. Prices are quoted on request and depend on the customer and the size of the job. To start, send the task description and the rack location through the contact page, and the request is scoped from there.

How Reboot Monkey Works

These terms apply in every facility in Yangon where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Yangon?

Remote hands covers physical tasks carried out on your instruction in your rack: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer performs the task and reports back. Work that needs diagnostic judgement and configuration knowledge falls under smart hands, and installing new hardware falls under rack and stack.

Do you provide on-site IT support in Yangon data centers?

Yes. Reboot Monkey engineers carry out the work on site, inside the data center that hosts your equipment, working under the facility operator's site rules. You send the task and the rack location, the work goes to an engineer with a briefed backup named for your site, and the engineer reports back once the task is done.

Do you work in every datacenter in Yangon?

Reboot Monkey engineers work in any facility in Yangon where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Yangon?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in Yangon?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Need hands at your rack in Yangon?

Send the task and the rack location. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote