Skip to content

Northern Mariana Islands · Susupe

Remote Hands in Susupe

Remote hands in Susupe means Reboot Monkey engineers carry out physical tasks in your rack on your instruction: reboots, cable checks, component swaps and visual checks. The same engineers provide on-site IT support in Susupe data centers when a task needs diagnostic judgement.

Remote Hands

  • 8

    services detailed for Susupe

  • 1

    agreement for every city

Request remote hands for your Susupe rack

Describe the task and the rack, and Reboot Monkey will quote the work.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in Susupe

IT&E Saipan stands on Tekken St in Susupe. When your equipment sits in a facility here and nobody from your own team is on the island, a failed power supply, a hung server or a loose patch cable still needs a person at the rack. Remote hands is that person, working on your instruction and reporting back to you as the work is done. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters, so your remote hands request is handled independently of the building's operator. For a buyer this means access to your rack follows the operator's process, and the engineer you send instructions to is already briefed on how that process works. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a task does not depend on one person being available. A request starts with your instruction: what to do, which rack and device, and how you want the result confirmed. The engineer carries out the task, checks the outcome against your instruction and reports what was done. You stay in control of the change, and the work stays within what you asked for.

Datacenter Facilities in Susupe

Data centres in Susupe, ordered by the number of networks present:

  • IT&E Saipan, Tekken St., 96950 Susupe: 1 network
  • MCV Saipan Datacenter (Guam Cablevision, LLC.), 2nd Floor Nauru Bldg, Susupe: 1 network

Our Remote Hands Services

Remote hands covers physical tasks carried out on the customer's instruction. In practice that means the following work inside your rack in Susupe:

  • Reboots and power cycles of servers and network devices that no longer respond remotely.
  • Cable checks, including tracing, reseating and re-patching connections inside your rack.
  • Component swaps, such as replacing a failed drive, memory module or power supply you have supplied.
  • Visual checks of equipment, with status lights and port indicators reported back to you.
  • Fibre inspection with a scope and cleaning kit, available on request, when a link shows errors.

Why Reboot Monkey

Work that needs diagnostic judgement and configuration knowledge is smart hands, a separate service from remote hands. If a task turns out to need more than the physical steps you described, the engineer tells you rather than improvising, and the scope is agreed before further work begins. Larger jobs sit in other services: rack and stack installs, mounts and cables new hardware, and server migration moves equipment between racks, rooms or facilities. Connectivity follows the same model. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack. One supplier can therefore handle the circuit order and the physical connection at your equipment. Hardware monitoring is also available, with the customer's servers and network equipment monitored by the Reboot Monkey NOC. Monitoring tells you that a device needs attention, and a remote hands engineer is the one who acts on it at the rack. Prices are quoted on request and depend on the customer and the size of the job, so you describe the work and receive a quote for that specific scope.

How Reboot Monkey Works

These terms apply in every facility in Susupe where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Susupe?

Remote hands covers physical tasks carried out on your instruction inside your rack: reboots, cable checks, component swaps and visual checks. Work that needs diagnostic judgement and configuration knowledge is smart hands, and new installations are rack and stack. Reboot Monkey engineers work under the facility operator's site rules, and a second briefed engineer is named as backup for your site.

Do you provide on-site IT support in Susupe data centers?

Yes. Reboot Monkey engineers work on site inside the facility, at your rack, carrying out the tasks you instruct and reporting what was done. A request starts with your instruction naming the rack, the device and the task. Access follows the facility operator's rules, and the quote reflects the size of the job.

Do you work in every datacenter in Susupe?

Reboot Monkey engineers work in any facility in Susupe where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Susupe?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in Susupe?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request remote hands for your Susupe rack

Describe the task and the rack, and Reboot Monkey will quote the work.

Published:

Get a quote