Skip to content

Panama · Panama City

Remote Hands in Panama City

Remote hands in Panama City means a Reboot Monkey engineer carries out physical tasks in your rack on your instruction: reboots, cable checks, component swaps and visual checks. It is on-site IT support in Panama City data centers for teams that run their equipment from elsewhere and need a pair of hands on the floor.

Remote Hands

  • 8

    services detailed for Panama City

  • 1

    agreement for every city

Request remote hands in Panama City

Send the device, the rack position and the action you need. Reboot Monkey confirms the scope and quotes the job.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in Panama City

Navégalo Data Center Panama (PA1) stands on Pacifico calle de serv. oeste in Panama City. Equipment housed in a building like this is usually managed by teams that sit in another city or another country, and the gap between a ticket and a physical action is where outages grow. Reboot Monkey closes that gap. It is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own a data center. The division of responsibility is simple. Your side of the arrangement is the instruction: you tell the engineer what to do, in which rack, and what you expect to see afterwards. Remote hands covers the tasks that need no diagnostic judgement. Work that does need configuration knowledge or fault-finding belongs to smart hands, which is a separate service with its own definition. For a buyer in Panama City that means one supplier and one way of working, whether the rack is in this city or in a site elsewhere in your estate.

Datacenter Facilities in Panama City

Data centres in Panama City, ordered by the number of networks present:

  • Metro MPLS, Calle 57 Este, Panama City
  • Navégalo Data Center Panama (PA1), Pacifico calle de serv. oeste, 10000 Panama City

Our Remote Hands Services

Remote hands is physical work carried out on your instruction. In Panama City the requests we handle fall into a few plain categories, and each one starts with a written instruction from you rather than an open-ended brief.

  • Reboots: power-cycling a server or network device that no longer responds to out-of-band management, then reporting what the console or indicator lights show afterwards.
  • Cable checks: tracing, reseating and confirming patch cabling in your rack. Reboot Monkey engineers install and patch the cabling in your rack, and a fibre inspection scope and cleaning kit are available on request.
  • Component swaps: replacing a failed drive, power supply, memory module or optic with a part you or your vendor have supplied.
  • Visual checks: reading LEDs, labels and port states and confirming the physical condition of equipment so that you can decide the next step without travelling.
  • Connectivity work: Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers then patch them into your equipment.

Why Reboot Monkey

A request starts when you send the instruction: the device, the rack position, the action and the result you need. Reboot Monkey confirms the scope with you before an engineer goes to the facility, and prices are quoted on request, depending on the customer and the size of the job. Continuity is built into how a site is covered. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a request does not depend on a single person being available. Because Reboot Monkey works inside facilities that other companies own and run, it is not tied to one building or one operator, and the same engineers and the same way of working apply across your locations. The neighbouring services follow the same pattern. When a task grows beyond a reboot or a swap, smart hands covers technical work that needs diagnostic judgement. Rack and stack covers installing, mounting and cabling new hardware, and server migration covers moving equipment between racks, rooms or facilities. Hardware monitoring means the Reboot Monkey NOC monitors your servers and network equipment, so an alert can become a remote hands request without a handover between suppliers.

How Reboot Monkey Works

These terms apply in every facility in Panama City where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Panama City?

Remote hands covers physical tasks that a Reboot Monkey engineer carries out in your rack on your instruction: reboots, cable checks, component swaps and visual checks. Work that needs diagnostic judgement and configuration knowledge is smart hands. The engineer works under the facility operator's site rules, and prices are quoted on request, depending on the customer and the size of the job.

Do you provide on-site IT support in Panama City data centers?

Yes. A second, briefed engineer is named as backup for every customer site.

Do you work in every datacenter in Panama City?

Reboot Monkey engineers work in any facility in Panama City where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Panama City?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in Panama City?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request remote hands in Panama City

Send the device, the rack position and the action you need. Reboot Monkey confirms the scope and quotes the job.

Published:

Get a quote