Skip to content
The Nelson Mandela Bridge spanning the rail yards towards Johannesburg's CBD towers, seen from Braamfontein under a summer sky with clouds.

Photo: Evan Bench · CC BY 2.0 · cropped · source

South Africa · Johannesburg

Server Migration in Johannesburg

Server migration in Johannesburg means moving equipment between racks, rooms or facilities. Reboot Monkey field engineers carry out the physical move inside the data centre, either end to end or alongside your own team, and the split of work is agreed for each project before it starts.

Server Migration

  • 8

    services detailed for Johannesburg

  • 1

    agreement for every city

Plan your move

Send the equipment list, the source and destination facilities and your target date, and Reboot Monkey will agree the split of work with you.

In depth

Server Migration: 6 sections, open any to read more.

Server Migration in Johannesburg

Teraco Johannesburg Campus, South Africa stands on Brewery Street in Johannesburg. For a CTO or IT director planning a move, the decisions that matter are who handles each stage, who owns the building rules, and what the buyer has in hand when the work is finished. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own a datacenter. For a migration, that means the work is physical and it happens in the facility where your equipment sits or where it is going. Server migration, as Reboot Monkey defines it, is moving equipment between racks, rooms or facilities. A migration plan therefore starts with the operator's access requirements for both the origin and the destination, and Reboot Monkey works within them. Project scope is set before any equipment is touched. Reboot Monkey can run the whole physical move or work alongside the customer's own team. Who disconnects, reconnects and tests the equipment is agreed per project, so a team that wants to keep its own network or application engineers in control of cutover can do so, and a team that wants a single party responsible for the physical stages can hand those over.

Datacenter Facilities in Johannesburg

Data centres in Johannesburg, ordered by the number of networks present:

  • Teraco Johannesburg Campus, South Africa (Teraco Data Environments Pty Ltd), 5 Brewery Street, Isando, Johannesburg: 391 networks; carriers DFA South Africa, Orange Wholesale International - EVPL and i3D.net
  • Teraco Johannesburg Bredell Campus (Teraco Data Environments Pty Ltd), 1 Riverfields Boulevard, Bredell, Johannesburg 1600: 22 networks; carriers DFA South Africa
  • OADC - Parklands (Open Access Data Centres), 7 - 9 Keyes Drive, Rosebank, Johannesburg: 21 networks; carriers DFA South Africa
  • OADC JNB1 - Johannesburg (Open Access Data Centres), 18 Electron Avenue, Isando, Johannesburg: 10 networks
  • Equinix JN1 - Johannesburg (Equinix, Inc.), 103 Brollo Road, Tunney, Germiston, Johannesburg: 9 networks; carriers DFA South Africa
  • Reflex Solutions (Reflex Solutions (Pty) Ltd), 220 Jan Smuts Avenue, Dunkeld, Johannesburg: 6 networks

Our Server Migration Services

A migration in Johannesburg is delivered as a sequence of physical stages. Each one is agreed with you before work begins, and you decide how much of the sequence Reboot Monkey carries and how much stays with your own staff.

  • Planning the move: the scope, the source and destination locations, and the split of tasks between Reboot Monkey engineers and your team, agreed per project.
  • Disconnecting equipment: powering down and removing cabling at the source, carried out by Reboot Monkey or by your team, as agreed.
  • Moving and mounting: transporting hardware and installing it in the destination rack, which draws on the same work as rack and stack: installing, mounting and cabling hardware.
  • Reconnecting and testing: cabling the equipment at the destination and checking it, with the responsible party named in the project plan.
  • Network for the destination rack: Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in your rack.
  • Site coverage for the day: a second, briefed Reboot Monkey engineer is named as backup for every customer site.

Why Reboot Monkey

A migration touches production equipment, so the buyer needs to know who is accountable at each step. Reboot Monkey works as a vendor-neutral operator inside facilities that other companies own and run, which means it does not tie a move to one landlord or one hardware brand. The engineers dispatched to your site work to your project plan and to the operator's rules.

Continuity is part of how a job is staffed. A second, briefed engineer is named as backup for every customer site, so the project does not depend on one person being available on the day. If a move is part of a wider change, the surrounding work is available under the same operator: remote hands for physical tasks on your instruction, smart hands for technical work that needs diagnostic judgement and configuration knowledge, and hardware monitoring of your servers and network equipment by the Reboot Monkey NOC.

Reach matters when a company moves equipment between countries or between a Johannesburg facility and a site elsewhere. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Because the physical work is carried out by Reboot Monkey engineers in the facilities involved, one party can plan both ends of a move.

Commercial terms follow the project. Prices are quoted on request and depend on the customer and the size of the job. To start, send the equipment list, the source and destination facilities and the date you are working towards, and the split of tasks between your team and Reboot Monkey is agreed from there.

How Reboot Monkey Works

These terms apply in every facility in Johannesburg where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Server Migration

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does server migration cover in Johannesburg?

Server migration covers moving equipment between racks, rooms or facilities. Reboot Monkey can run the whole physical move or work alongside your own team, and who disconnects, reconnects and tests the equipment is agreed per project. Engineers work under the facility operator's site rules, and a second, briefed engineer is named as backup for the site.

Do you work in every datacenter in Johannesburg?

Reboot Monkey engineers work in any facility in Johannesburg where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Johannesburg?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with server migration in Johannesburg?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the server migration work is scheduled under the operator's rules.

Plan your move

Send the equipment list, the source and destination facilities and your target date, and Reboot Monkey will agree the split of work with you.

Published:

Get a quote