Skip to content

Trinidad and Tobago · Port Of Spain

Smart Hands in Port Of Spain

Smart hands is technical work inside a data center that needs diagnostic judgement and configuration knowledge, beyond a simple reboot or cable check. Reboot Monkey provides on-site IT support in Port Of Spain data centers: an engineer is dispatched to your rack, works under the facility operator's site rules, and reports back on what was done.

Smart Hands

  • 8

    services detailed for Port Of Spain

  • 1

    agreement for every city

Request smart hands in Port Of Spain

Describe the symptom or task and the equipment involved. Reboot Monkey quotes the job based on its scope.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Port Of Spain

Amplia DC1 stands on Tragarete Rd in Port Of Spain. For a business that keeps servers, switches or storage in a Port Of Spain facility, the practical question is who can act on the equipment when something needs more than a power cycle, and who can do it without a flight to the island. Smart hands answers that question. It is the service line for work that requires an engineer to read a fault, decide on a course of action and carry it out in the rack, rather than follow a single written instruction. Reboot Monkey is a third-party datacenter services operator. It does not own or run the building. That means a request is shaped around what the operator permits on site, and the engineer confirms those conditions with you before the visit. Coverage matters for a customer with equipment in more than one country.

Datacenter Facilities in Port Of Spain

Data centres in Port Of Spain, ordered by the number of networks present:

  • Amplia DC1, Tragarete Rd, 00000 Port of Spain: 1 network
  • Digicel Trinidad and Tobago (Digicel Group), 11C Maraval Road, Port of Spain

Our Smart Hands Services

Smart hands differs from remote hands in the level of judgement involved. Remote hands covers physical tasks carried out on your instruction: reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. If you know exactly what must be done, remote hands is the right line. If you know the symptom but not the cause, smart hands is.

A request moves through a fixed sequence. You describe the symptom or the task and the equipment involved. A Reboot Monkey engineer reviews it, confirms scope and the operator's access conditions, and is dispatched to the facility. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the work does not depend on one person's availability. After the visit you receive a report of what was found and what was changed, which is your proof that the work was done as agreed.

Typical smart hands work includes:

  • Diagnosing a server, switch or storage fault in the rack and carrying out the repair or component swap
  • Installing and patching cabling in your rack, including the patching that follows a cross connect ordered from the facility operator or a carrier
  • Inspecting and cleaning fibre connectors when a link will not come up (a fibre inspection scope and cleaning kit are available on request)
  • Following your configuration instructions on equipment at the console when remote access is unavailable
  • Moving equipment between racks or rooms as part of a wider server migration, or mounting new hardware as part of a rack and stack job

Why Reboot Monkey

Reboot Monkey sells the pieces that surround a rack in a facility it does not own: rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and not a datacenter owner. For a buyer, that separation is practical. Your contract for hands-on support is not tied to whichever operator runs the building, and the same engineering process applies if your equipment sits in another facility.

Connectivity is part of the same relationship. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in your rack. A circuit and the hands that terminate it can therefore be handled in one request instead of being coordinated across several vendors.

Smart hands is one of several service lines you can combine as your needs change. Remote hands covers instructed physical tasks, rack and stack covers installing new hardware, server migration covers moving equipment, and hardware monitoring means the Reboot Monkey NOC monitors your servers and network equipment. Prices are quoted on request and depend on the customer and the size of the job, so you receive a quote for your scope rather than a generic figure.

How Reboot Monkey Works

These terms apply in every facility in Port Of Spain where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Port Of Spain?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge: diagnosing faults in the rack, swapping components, installing and patching cabling, inspecting fibre connectors and following your configuration instructions at the console. Simple instructed tasks such as reboots and visual checks fall under remote hands.

Do you provide on-site IT support in Port Of Spain data centers?

Yes. Reboot Monkey engineers are dispatched to your rack in the facility, confirm the scope and the operator's access conditions with you first, carry out the work and send a report of what was found and changed. A second, briefed engineer is named as backup for every customer site. Prices are quoted on request.

Do you work in every datacenter in Port Of Spain?

Reboot Monkey engineers work in any facility in Port Of Spain where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Port Of Spain?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Port Of Spain?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request smart hands in Port Of Spain

Describe the symptom or task and the equipment involved. Reboot Monkey quotes the job based on its scope.

Published:

Get a quote