Skip to content

Bahrain · Askar

Rack and Stack in Askar

Rack and stack in Askar means installing, mounting and cabling new hardware in a rack. Reboot Monkey engineers carry out the work inside a data centre owned and run by another company, including cabling, labelling and power-on checks. Quotes are on request.

Rack and Stack

  • 8

    services detailed for Askar

  • 1

    agreement for every city

Plan your rack and stack in Askar

Tell Reboot Monkey what hardware is arriving and where it is going. Quotes are on request and depend on the customer and the size of the job.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Askar

Global Zone Askar stands on Road in Askar. Reboot Monkey does not own or run that building or any other data centre. It is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. Rack and stack is the service that puts new hardware into a customer's rack. It covers installing, mounting and cabling the equipment that has arrived, and it is the step between a delivery to the facility and a server that is ready to be configured. For a procurement manager this means the work is planned around those rules from the first request. For a CTO or IT Director it means one point of contact for the physical side of a deployment, whichever hardware vendor supplied the equipment.

Datacenter Facilities in Askar

Data centres in Askar, ordered by the number of networks present:

  • Global Zone Askar, Road 5143, Building 1778, Block 951, Askar: 4 networks
  • AWS Bahrain DC53 MMR (Amazon.com, Inc.): 1 network
  • Global Zone (Manama Internet Exchange (MN-IX)), Building 1778 - Road 5143, Block 951, BH Askar: 1 network

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks. Each part of that scope has a defined purpose, and the list below sets out what a request in Askar includes.

The engineer mounts the hardware in the rack position agreed with the customer, connects the cabling and labels it, and then powers the equipment on and checks that it starts. Quotes are on request and depend on the customer and the size of the job.

  • Installing and mounting new servers, switches and other equipment in the customer's rack.
  • Cabling the equipment, with labels applied so that each connection can be identified later.
  • Power-on checks after installation, so the customer knows the hardware starts before remote configuration begins.
  • Network connections for the rack: Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack.
  • A fibre inspection scope and cleaning kit, available on request, for fibre connections that need checking.

Why Reboot Monkey

Reboot Monkey works inside other companies' data centres, and that shapes how a rack and stack job is run. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the job does not depend on a single person being available on the day. The cabling a rack and stack job leaves behind is part of the deliverable. The cables run between devices and to the patch points in the rack, and each one is labelled. That labelling is what a later remote hands or smart hands request relies on when someone has to trace a connection. Rack and stack also sits alongside the other physical services Reboot Monkey runs in the same facilities: remote hands for tasks carried out on the customer's instruction, smart hands for technical work that needs diagnostic judgement, server migration for moving equipment between racks, rooms or facilities, and hardware monitoring by the Reboot Monkey NOC. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer with equipment in several places can therefore request the same service in each of them instead of arranging separate local suppliers.

How Reboot Monkey Works

These terms apply in every facility in Askar where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Askar?

Rack and stack in Askar covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks, carried out by Reboot Monkey engineers under the facility operator's site rules. A second, briefed engineer is named as backup for every customer site. Quotes are on request and depend on the customer and the size of the job.

Do you work in every datacenter in Askar?

Reboot Monkey engineers work in any facility in Askar where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Askar?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Askar?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your rack and stack in Askar

Tell Reboot Monkey what hardware is arriving and where it is going. Quotes are on request and depend on the customer and the size of the job.

Published:

Get a quote