Bahrain · Askar
Smart Hands in Askar
Smart hands in Askar is technical work inside a data center that needs diagnostic judgement and configuration knowledge, carried out by Reboot Monkey field engineers. We provide on-site IT support in Askar data centers for customers who run their own equipment in facilities owned by other operators.
In Smart Hands
- Smart Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- ITADon request
Smart Hands
8
services detailed for Askar
1
agreement for every city
Plan your Smart Hands cover in Askar
Tell Reboot Monkey which equipment you run in Askar and what work you expect, and we will respond with a quote.
In depth
Smart Hands: 6 sections, open any to read more.
Smart Hands in Askar
Global Zone Askar stands on Road in Askar. For a customer with equipment in a facility like this, the difficult part is rarely the hardware itself. It is the moment a fault needs someone who can read the symptoms, decide what to check next and change a configuration, and nobody from the customer's own team is within reach of the rack. Smart hands is the service for that moment. It is technical work that needs diagnostic judgement and configuration knowledge, which separates it from remote hands, where an engineer carries out physical tasks on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. With smart hands, the customer describes the problem or the outcome required, and the Reboot Monkey engineer works out the steps, performs them and reports back. Reboot Monkey is a third-party datacenter services operator. It does not own or run the building in Askar.
Datacenter Facilities in Askar
Data centres in Askar, ordered by the number of networks present:
- Global Zone Askar, Road 5143, Building 1778, Block 951, Askar: 4 networks
- AWS Bahrain DC53 MMR (Amazon.com, Inc.): 1 network
- Global Zone (Manama Internet Exchange (MN-IX)), Building 1778 - Road 5143, Block 951, BH Askar: 1 network
Our Smart Hands Services
Smart hands requests in Askar usually start from a symptom or a change that has to happen inside the customer's rack. The engineer takes the request, confirms the scope with the customer and carries out the work on site. The work sits alongside the rest of the Reboot Monkey service range, so a job that begins as a diagnosis can continue as a component swap, a hardware install or a move without a change of supplier.
Because Reboot Monkey also sells the network for the rack, connectivity work is part of the same request. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack. A fibre inspection scope and cleaning kit are available on request, which matters when a link fault turns out to be a dirty or damaged connector rather than a failed device.
- Fault diagnosis on servers and network equipment, followed by the corrective steps the diagnosis points to
- Configuration work on customer equipment that needs technical knowledge rather than a simple physical action
- Cabling installation and patching in the customer's rack, including cross connects ordered through the operator
- Fibre inspection and cleaning where a link problem is suspected at the connector
- Hand-over to related services such as rack and stack, server migration or hardware monitoring when the job grows beyond the first request
Why Reboot Monkey
Reboot Monkey is vendor-neutral. It supports the equipment the customer already runs and does not steer a job toward a product line. Its position is that of a third party working inside facilities that other companies own and run, so the customer keeps one point of contact for the physical side of the estate rather than a different contact at each building.
Continuity is built into the arrangement. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a request does not depend on a single person being available. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, which means a customer with equipment in Askar and elsewhere can use the same service for both.
Procurement teams should note that prices are quoted on request and depend on the customer and the size of the job. To scope a smart hands arrangement for Askar, send the equipment, the facility and the kind of work expected through the contact form and Reboot Monkey will respond with a quote.
How Reboot Monkey Works
These terms apply in every facility in Askar where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does smart hands cover in Askar?
Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, carried out by Reboot Monkey engineers inside the customer's rack. That includes fault diagnosis, configuration changes, and cabling installation and patching. A fibre inspection scope and cleaning kit are available on request. Simple physical tasks such as reboots fall under remote hands.
Do you provide on-site IT support in Askar data centers?
Yes. Reboot Monkey field engineers carry out the work on site, inside the customer's rack, under the facility operator's site rules. A second, briefed Reboot Monkey engineer is named as backup for every customer site. Prices are quoted on request.
Do you work in every datacenter in Askar?
Reboot Monkey engineers work in any facility in Askar where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Askar?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with smart hands in Askar?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Plan your Smart Hands cover in Askar
Tell Reboot Monkey which equipment you run in Askar and what work you expect, and we will respond with a quote.