Skip to content

Mali · Bamako

Smart Hands in Bamako

Smart hands is technical work inside the data center that needs diagnostic judgement and configuration knowledge, not only a physical task. Reboot Monkey engineers are dispatched to your equipment in Bamako, and this page sets out what the work covers, how a request is handled and what you receive when it is done.

Smart Hands

  • 8

    services detailed for Bamako

  • 1

    agreement for every city

Plan your Smart Hands work in Bamako

Tell Reboot Monkey what needs attention in your rack and receive a quote based on the size of the job.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Bamako

Afribone DC Bamako MALI stands on Baco Djikoroni in Bamako. For a business that keeps servers or network equipment in Bamako but cannot send its own staff to the rack, the practical question is who can reach the equipment, work out what is wrong and fix it. Smart hands answers that question. It is technical work that needs diagnostic judgement and configuration knowledge, and it differs from remote hands, which covers physical tasks carried out strictly on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Reboot Monkey is a third-party datacenter services operator. It does not own or run the data centers where it works. Within that arrangement, Reboot Monkey engineers are dispatched to your equipment in Bamako to carry out the work. The same engineers who handle smart hands work also install, patch and support the network for your rack, so a fault that starts as a connectivity symptom can be traced and corrected by one party rather than passed between vendors.

Datacenter Facilities in Bamako

Data centres in Bamako, ordered by the number of networks present:

  • Afribone DC Bamako MALI (Afribone Mali SA), Baco Djikoroni, BPE 449, Bamako: 2 networks
  • MLIX (Autorité Malienne de Regulation des Télécommincations/TIC et Postes (AMRTP)), 12°37'54.2"N 8°01'39.0"W, Bamako

Our Smart Hands Services

Reboot Monkey provides on-site IT support in Bamako data centers for work that goes beyond pressing a button or swapping a part on instruction. The engineer arrives with the context of your request, examines the equipment, forms a view of the cause and acts on it. The scope below follows the service definitions Reboot Monkey uses across every location.

A request starts with a description of the fault or the change you need. An engineer is assigned, and a second, briefed Reboot Monkey engineer is named as backup for every customer site, so the work does not depend on a single person being available. The engineer carries out the task in your rack under the facility operator's access rules and reports back on what was found and what was done.

  • Diagnostic troubleshooting of servers and network equipment, where the engineer judges the cause rather than following a fixed script.
  • Configuration work that depends on knowledge of the equipment, carried out on your instruction.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Cabling and patching in your rack. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in your rack.
  • Fibre checks: a fibre inspection scope and cleaning kit are available on request.
  • Hardware monitoring: the Reboot Monkey NOC monitors your servers and network equipment, so a fault can be raised and then handed to an engineer on site.

Why Reboot Monkey

Reboot Monkey sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them. Because these sit in one relationship, a Bamako deployment can be ordered, installed and kept running without coordinating separate suppliers for space, connectivity and hands-on work.

Smart hands in Bamako is also part of a wider service set. Where a job grows beyond a single visit, the same engineers can take on remote hands, rack and stack, server migration, data center decommissioning and IT asset disposition. Decommissioning covers removing and disposing of retired hardware, and IT asset disposition covers data wiping, on-site shredding or degaussing, collection and transport, with resale or buyback quoted case by case.

Reboot Monkey is not a hosting company, so it has no interest in moving your workloads onto its own platform. It works on your equipment, in the building you have already chosen. Prices are quoted on request and depend on the customer and the size of the job. To scope a task in Bamako, describe what you need and Reboot Monkey will respond with how the work would be carried out.

How Reboot Monkey Works

These terms apply in every facility in Bamako where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Bamako?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. A Reboot Monkey engineer is dispatched to your equipment in Bamako to troubleshoot servers and network equipment, carry out configuration tasks, install and patch cabling, and handle rack and stack or server migration work. The task is agreed with you before the engineer starts.

Do you provide on-site IT support in Bamako data centers?

Yes. Reboot Monkey engineers are dispatched to your equipment in Bamako, work in your rack and carry out the task you requested. They work under the facility operator's site rules, because the operator owns and runs the building. A second, briefed engineer is named as backup for every customer site, and the engineer reports on the work afterwards.

Do you work in every datacenter in Bamako?

Reboot Monkey engineers work in any facility in Bamako where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Bamako?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Bamako?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Plan your Smart Hands work in Bamako

Tell Reboot Monkey what needs attention in your rack and receive a quote based on the size of the job.

Published:

Get a quote