Skip to content

Lebanon · Beirut

Smart Hands in Beirut

Smart hands is technical work inside a data center that needs diagnostic judgement and configuration knowledge, beyond following a script. Reboot Monkey engineers carry out on-site IT support in Beirut data centers for equipment that the customer already runs in someone else's building.

Smart Hands

  • 8

    services detailed for Beirut

  • 1

    agreement for every city

Request smart hands in Beirut

Describe the fault or the change and a Reboot Monkey engineer will respond with the scope and a quote.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Beirut

Berytech Technological Pole stands on Berytech Technology Pole - ESIB - Beirut. Reboot Monkey does not own or operate data centers. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centers that other companies own and run. Smart hands is one of those services, and it is the one a customer calls when a fault cannot be solved by a simple reboot or a cable swap. The difference from remote hands is the kind of decision involved. Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. An engineer reads the symptoms, narrows down the cause on the hardware in front of them, and reports back to the customer's own team with findings rather than only a confirmation that a task was done. For a buyer in Beirut this means the work is planned around the operator's access procedure, and the customer keeps a single point of contact at Reboot Monkey for the request from first message to finished job.

Datacenter Facilities in Beirut

Data centres in Beirut, ordered by the number of networks present:

  • Berytech Technological Pole (Berytech SCAL), Berytech Technology Pole - ESIB - Beirut, Mar Roukoz, 11-7503: 1 network
  • Capital Outsourcing Beirut (CAPITAL OUTSOURCING SAL), Achrafieh-Charles Malek Avenue-Hadifeh building, 00961 Beirut

Our Smart Hands Services

A smart hands request in Beirut starts with a written description of the fault or the change, sent to Reboot Monkey. The request is matched to an engineer who can read the symptoms, and a second, briefed Reboot Monkey engineer is named as backup for every customer site, so the work does not depend on one person being available. On-site IT support in Beirut data centers is delivered by the same engineers for both planned and unplanned work. Typical scope for smart hands is listed below. The customer defines the boundary of each job in the request, and the work stays within what is agreed. Network connectivity is a common reason to call. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When a link does not come up, the engineer checks the patching and the cable, and a fibre inspection scope and cleaning kit are available on request. Prices are quoted on request and depend on the customer and the size of the job.

  • Fault diagnosis on servers and network equipment where the cause is not obvious from a remote console
  • Hardware replacement and component swaps, with the failed part identified before it is changed
  • Cabling checks and patching in the customer's rack, including links ordered through the operator and the carriers
  • Configuration steps on equipment that needs hands-on access, carried out as written in the customer's instructions
  • Written reporting after each job, so the customer's team can see what was found and what was done
  • Work around a hardware monitoring alert raised by the Reboot Monkey NOC, where the customer has that service

Why Reboot Monkey

Reboot Monkey is a third-party operator. It works inside facilities that other companies own, which keeps the engineering service separate from the building and its operator. A customer can run equipment from one supplier, connectivity from another and still use one smart hands provider for the physical and diagnostic work in the rack. Hardware sold by Reboot Monkey is installed and supported by the same engineers who handle the later faults.

The customer's contact stays the same from the first request to the closing report. The work is described in the customer's own terms: what was asked, what was found, what was changed, and what remains open. Where a job turns out to need a different service, for example moving equipment or retiring it, the same team can take it on as rack and stack, server migration or data center decommissioning, and the scope is agreed again before work begins.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That reach matters to a buyer in Beirut who also has equipment elsewhere: the same way of handling a request, with the same written reporting, applies to those sites without a new supplier process for each one. The service terms for response, monitoring and hardware vendors are set out in the service block of this page, so this section does not repeat them.

How Reboot Monkey Works

These terms apply in every facility in Beirut where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Beirut?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, carried out by Reboot Monkey engineers in the customer's rack. That includes fault diagnosis, hardware replacement, cabling and patching checks, and hands-on configuration steps. The customer sets the scope of each job in the request, and the engineer reports findings back in writing.

Do you provide on-site IT support in Beirut data centers?

Yes. Reboot Monkey engineers work on site in the customer's rack under the facility operator's site rules. A request is sent in writing, an engineer is assigned, and a second briefed engineer is named as backup for every customer site. The engineer diagnoses the issue, carries out the agreed work and reports the result back to the customer's team.

Do you work in every datacenter in Beirut?

Reboot Monkey engineers work in any facility in Beirut where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Beirut?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Beirut?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request smart hands in Beirut

Describe the fault or the change and a Reboot Monkey engineer will respond with the scope and a quote.

Published:

Get a quote