Lebanon · Beirut
Remote Hands in Beirut
Reboot Monkey sends field engineers into the data center where your equipment already sits, to carry out the physical tasks you instruct: reboots, cable checks, component swaps and visual checks. You give the instruction, an engineer carries it out at the rack. This is on-site IT support in Beirut data centers, delivered by a third-party operator.
In Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
- ITADon request
Remote Hands
8
services detailed for Beirut
1
agreement for every city
Request Remote Hands in Beirut
Describe the task and the site, and Reboot Monkey will quote it. Prices are quoted on request and depend on the customer and the size of the job.
In depth
Remote Hands: 6 sections, open any to read more.
Remote Hands in Beirut
Berytech Technological Pole stands on Berytech Technology Pole - ESIB - Beirut. Reboot Monkey is a third-party datacenter services operator, which means it works inside data centers that other companies own and run. It is not a hosting company and it does not own a data center in Beirut or anywhere else. Remote hands is the service for the moment when your own staff cannot be at the rack. You describe the task, and an engineer performs it on the hardware you already operate. The scope is defined by the physical nature of the work: the engineer acts on the customer's instruction and does not decide what to change. Typical requests include rebooting a server that has stopped responding, checking that a cable is seated in the right port, swapping a failed component with a spare you have supplied, and looking at the front panel or status lights to report what they show. For a CTO or IT director responsible for equipment in Beirut, the practical value is a single party that can be instructed by ticket or by message and that reports back on what was found at the rack. Prices are quoted on request and depend on the customer and the size of the job, so the first step is a short description of the task and the site.
Datacenter Facilities in Beirut
Data centres in Beirut, ordered by the number of networks present:
- Berytech Technological Pole (Berytech SCAL), Berytech Technology Pole - ESIB - Beirut, Mar Roukoz, 11-7503: 1 network
- Capital Outsourcing Beirut (CAPITAL OUTSOURCING SAL), Achrafieh-Charles Malek Avenue-Hadifeh building, 00961 Beirut
Our Remote Hands Services
Remote hands covers physical tasks carried out on your instruction. Where a task needs more than instruction-following, the neighbouring services apply, and each has its own definition so that you can order the right one the first time.
When a request needs diagnostic judgement and configuration knowledge, that is smart hands rather than remote hands. When new hardware has to be installed, mounted and cabled, that is rack and stack. Moving equipment between racks, rooms or facilities is server migration. Removing and disposing of retired hardware is data center decommissioning, and IT asset disposition (ITAD) covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. Hardware monitoring is monitoring of your servers and network equipment by the Reboot Monkey NOC.
Network work follows the same pattern. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack. A fibre inspection scope and cleaning kit are available on request, which is useful when a link is down and a dirty connector is the suspected cause.
- Reboots and power cycling of equipment you identify
- Cable checks, patching and port verification at the rack
- Component swaps using parts you or Reboot Monkey supply
- Visual checks of status lights, labels and rack contents, reported back to you
Why Reboot Monkey
Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. Because it is a third-party operator and not a facility owner, the work is organised around your equipment and your instruction rather than around a building's own product list. That reach matters to a buyer with equipment in Beirut and elsewhere, because the same way of working applies at each site and requests do not have to be re-explained for every location. Continuity is built into how a site is set up. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a request does not depend on one person being available. For work beyond remote hands, such as a migration or a decommissioning, the same engineers and the same ordering route apply, with the service definition above setting the scope.
How Reboot Monkey Works
These terms apply in every facility in Beirut where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does remote hands cover in Beirut?
Remote hands covers physical tasks carried out on your instruction inside the data center: reboots, cable checks, component swaps and visual checks. The engineer acts on what you ask and reports back. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing new hardware is rack and stack. Prices are quoted on request.
Do you provide on-site IT support in Beirut data centers?
Yes. Reboot Monkey engineers work on site at the rack under the facility operator's site rules, which cover power, cooling and access. You send the task, an engineer carries it out on your equipment, and you receive a report of what was done. A second, briefed engineer is named as backup for every customer site.
Do you work in every datacenter in Beirut?
Reboot Monkey engineers work in any facility in Beirut where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Beirut?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with remote hands in Beirut?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Request Remote Hands in Beirut
Describe the task and the site, and Reboot Monkey will quote it. Prices are quoted on request and depend on the customer and the size of the job.