Lebanon · Beirut
Server Migration in Beirut
Server migration in Beirut means moving servers and network equipment between racks, rooms or facilities. Reboot Monkey engineers handle the physical move inside the facility, working under the site operator's rules, either as the whole project team or alongside your own staff.
In Server Migration
- Server Migration
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Remote Hands
- Smart Hands
- ITADon request
Server Migration
8
services detailed for Beirut
1
agreement for every city
Plan your server migration in Beirut
Tell Reboot Monkey what has to move and where it has to go. Prices are quoted on request and depend on the customer and the size of the job.
In depth
Server Migration: 6 sections, open any to read more.
Server Migration in Beirut
Berytech Technological Pole stands on Berytech Technology Pole - ESIB - Beirut in Beirut. A server migration here is the physical relocation of equipment between racks, rooms or facilities, and it is a project with a defined start, a defined end and a clear split of responsibilities. Reboot Monkey is a third-party datacenter services operator. It does not own or run data centres and it is not a hosting company, so the work is carried out inside buildings that other companies operate. A migration usually starts with the customer describing what has to move, where it is now and where it has to go. From that brief, Reboot Monkey agrees the scope: which servers, which network equipment, which cabling, and which destination racks or rooms. The roles are settled at this stage as well. Reboot Monkey can run the whole physical move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project. That agreement matters because a migration often touches systems that only the customer's administrators can bring back into service.
- Moving equipment between racks inside the same room
- Moving equipment between rooms in the same building
- Moving equipment between facilities
- Re-cabling and patching at the destination rack
Datacenter Facilities in Beirut
Data centres in Beirut, ordered by the number of networks present:
- Berytech Technological Pole (Berytech SCAL), Berytech Technology Pole - ESIB - Beirut, Mar Roukoz, 11-7503: 1 network
- Capital Outsourcing Beirut (CAPITAL OUTSOURCING SAL), Achrafieh-Charles Malek Avenue-Hadifeh building, 00961 Beirut
Our Server Migration Services
Server migration is one of several physical services Reboot Monkey delivers inside customer racks, and a move often combines more than one of them. The services sit alongside each other so that a single project can be handled without separate suppliers for each step.
The core of the work is the move itself: moving equipment between racks, rooms or facilities. Where new hardware is part of the project, rack and stack covers installing, mounting and cabling it at the destination. Where the destination needs network connectivity, Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Once the equipment is running in its new position, remote hands covers physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, which is useful when a moved system does not come back as expected.
When the move leaves retired equipment behind, data center decommissioning covers removing and disposing of that hardware, and IT asset disposition covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. After the migration, hardware monitoring means the Reboot Monkey NOC monitors your servers and network equipment in their new location.
- Server migration: moving equipment between racks, rooms or facilities
- Rack and stack: installing, mounting and cabling new hardware
- Network connectivity: cross connects and carrier circuits ordered through the facility operator and carriers, cabling patched by Reboot Monkey engineers
- Remote hands and smart hands: physical and technical follow-up after the move
- Decommissioning and IT asset disposition for equipment that is retired
- Hardware monitoring by the Reboot Monkey NOC
Why Reboot Monkey
Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. For a migration, that means the same supplier can handle the equipment move and the connectivity it depends on, rather than leaving the customer to coordinate several parties on the day. Coverage is a practical point for teams that run equipment in more than one country. A move that starts in one place and ends in another can therefore be planned with one supplier instead of a patchwork of local contractors. Continuity is built into every customer site. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the project does not depend on a single person being available on the day of the move. Commercial terms follow the same project logic. Prices are quoted on request and depend on the customer and the size of the job. To start, describe what has to move, the current and target locations, and any dates the move has to respect, and Reboot Monkey will respond with a scoped proposal for the work in Beirut.
How Reboot Monkey Works
These terms apply in every facility in Beirut where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Server Migration
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does server migration cover in Beirut?
Server migration in Beirut covers moving equipment between racks, rooms or facilities. Reboot Monkey can run the whole physical move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project. Work happens under the facility operator's site rules, and a second briefed engineer is named as backup for the customer site.
Do you work in every datacenter in Beirut?
Reboot Monkey engineers work in any facility in Beirut where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Beirut?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with server migration in Beirut?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the server migration work is scheduled under the operator's rules.
Plan your server migration in Beirut
Tell Reboot Monkey what has to move and where it has to go. Prices are quoted on request and depend on the customer and the size of the job.