Skip to content

Iraq · Baghdad

Remote Hands in Baghdad

Remote hands in Baghdad means Reboot Monkey engineers carry out physical tasks in your racks on your instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey provides on-site IT support in Baghdad data centers without owning or operating the building, so you direct the work and your equipment stays where it is.

Remote Hands

  • 8

    services detailed for Baghdad

  • 1

    agreement for every city

Describe the task, receive a quote

Tell Reboot Monkey which equipment is in Baghdad and what needs doing. Prices are quoted on request and depend on the customer and the size of the job.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in Baghdad

AL-MARAJ AL-ALAMIYA Co. stands on Hay - Al-Wahda Street in Baghdad. For a team that runs servers and network equipment in the city but does not have staff standing next to the racks, remote hands is the service that closes that gap. You describe the task, and a Reboot Monkey engineer carries it out at the rack and reports back. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own a datacenter. That separation matters to a buyer in practice: the equipment stays yours, the building stays with its operator, and Reboot Monkey supplies the hands and the coordination between the two. A request therefore starts with the task you need done and the location of the equipment, and the engineer carries it out inside the access arrangements the operator sets.

Datacenter Facilities in Baghdad

Data centres in Baghdad, ordered by the number of networks present:

  • Talia Baghdad (Commercis), Area 601 Al Amirat, Baghdad: 2 networks
  • AL-MARAJ AL-ALAMIYA Co., Hay - Al-Wahda Street, 00964 Baghdad
  • Shakir Hage (AL-SAHIN AL-SHABALY Co), Baghdad, 10001

Our Remote Hands Services

Remote hands covers physical tasks carried out on the customer's instruction. The typical jobs are reboots, cable checks, component swaps and visual checks. You give the instruction, the engineer performs it, and you receive confirmation of what was done so that your own team can continue remotely.

A request moves through the same steps each time:

1. You send the instruction: which device, which rack, and what should be done. 2. A Reboot Monkey engineer attends the rack and carries out the task as written. 3. The engineer reports back on the result, so your team knows the state of the equipment before it closes the ticket.

For the network side, Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. If a link needs inspecting, a fibre inspection scope and cleaning kit are available on request.

Some work needs more than an instruction followed to the letter. Smart hands is technical work that needs diagnostic judgement and configuration knowledge, and it is a separate service from remote hands. Where a job grows beyond a physical task, the scope can be agreed before the work starts so you know which service applies.

The same engineers support the surrounding work in the city:

  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey

Continuity is the first question a procurement manager or IT director should ask of any remote hands provider: what happens when the engineer assigned to your site is not available. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the work does not depend on one person.

Reboot Monkey works across borders as a single operator. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company with equipment in Baghdad and elsewhere, that means the same service model applies to each site and you manage one supplier relationship instead of several local ones.

Because Reboot Monkey does not own or run the building, its advice is not tied to selling you space in a particular facility. It works inside whichever data centre holds your equipment, under that operator's rules, and its engineers are dispatched to your facility rather than to an office of their own.

Commercial terms follow the size of the job. Prices are quoted on request and depend on the customer and the size of the job, so the first step is to describe what you need done and where. Use the contact page to send that description and receive a quote.

How Reboot Monkey Works

These terms apply in every facility in Baghdad where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Baghdad?

Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer performs the task at the rack and reports the result. Work that needs diagnostic judgement and configuration knowledge falls under smart hands, which is a separate service.

Do you provide on-site IT support in Baghdad data centers?

Yes. Reboot Monkey engineers carry out the work at your equipment inside the data centre: you send an instruction, the engineer performs the task at the rack, and then reports what was done. The facility operator owns and runs the building, and the engineers work under the operator's site rules. A second, briefed engineer is named as backup for every customer site.

Do you work in every datacenter in Baghdad?

Reboot Monkey engineers work in any facility in Baghdad where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Baghdad?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in Baghdad?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Describe the task, receive a quote

Tell Reboot Monkey which equipment is in Baghdad and what needs doing. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote