Burkina Faso · Ouagadougou
Rack and Stack in Ouagadougou
Rack and stack in Ouagadougou means installing, mounting and cabling new hardware in a customer's rack. Reboot Monkey engineers carry out the cabling, labelling and power-on checks inside a data centre that another company owns and runs.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Ouagadougou
1
agreement for every city
Plan your rack and stack in Ouagadougou
Send the hardware list and connectivity needs, and Reboot Monkey will quote the job. Prices are quoted on request.
In depth
Rack and Stack: 6 sections, open any to read more.
Rack and Stack in Ouagadougou
Virtix Data Center stands on Ouaga. For a team commissioning new servers, switches or storage in Ouagadougou, the physical installation is the step that decides when equipment goes live. Rack and stack is the work of installing, mounting and cabling new hardware, and it is the point where a purchase order becomes a working rack.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. That separation matters to a buyer: the building, its power, its cooling and its access policy belong to the facility operator, and Reboot Monkey engineers work under the operator's site rules.
For a CTO or IT director, this means one party accountable for the physical work while the facility stays in the hands of its operator. For procurement, it means the installation can be scoped as a defined job: the hardware to be mounted, the cabling to be run, the labelling to be applied and the checks to be performed before the equipment is handed back to your own engineers for configuration.
Datacenter Facilities in Ouagadougou
Data centres in Ouagadougou, ordered by the number of networks present:
- Virtix Data Center (Virtual Technologies and Solutions SA), Ouaga 2000, 8G72+HJW, Ouagadougou: 4 networks
- Datacenter Ministere de l'agriculture (Burkina Faso Internet eXchange), Ouaga 2000, Ouagadougou, 8G32+W2 Ouagadougou: 3 networks
- Datacenter Immeuble du Faso (Burkina Faso Internet eXchange), Immeuble du Faso, Avenue de l´Indépendance, 7701 Ouagadougou: 1 network
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks. Quotes are on request, and prices depend on the customer and the size of the job, so a single server and a full row of racks are scoped separately.
A request moves through a short sequence. You send the equipment list, the target rack position and the cabling plan, or ask Reboot Monkey to propose one. Reboot Monkey names the engineer who will carry out the work, and a second, briefed Reboot Monkey engineer is named as backup for every customer site. The engineer then mounts the hardware, runs and patches the cabling, labels each cable and port, and performs the power-on checks. Once the work is finished, you receive confirmation that the equipment is installed and powered on, so your team can begin remote configuration.
Network is part of the same job. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A fibre inspection scope and cleaning kit are available on request, which is useful when a new link does not come up and the cause may be a dirty connector rather than a faulty port.
Rack and stack sits alongside the other physical services Reboot Monkey provides:
- Remote hands: physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Server migration: moving equipment between racks, rooms or facilities.
- Hardware monitoring: monitoring of your servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company with equipment in several regions, that allows the same rack and stack process to be applied in Ouagadougou as elsewhere, rather than negotiating a different local arrangement for each site.
The model is deliberately narrow. Reboot Monkey installs, cables and supports hardware, and it leaves the building to its operator. That keeps responsibilities clear when something goes wrong: a question about power, cooling or access goes to the operator, and a question about how your hardware was mounted, cabled or labelled goes to Reboot Monkey.
The cabling, labelling and power-on checks are done as one piece of work, so the person who patches a cable is also the person who labels it and confirms the device powers on. Labelling is a small detail that pays back later, when a technician acting on a remote hands request needs to find a specific port without guessing. The installation also feeds into support: once the hardware is racked, the same engineers can handle follow-up remote hands or smart hands tasks, and the NOC can monitor the servers and network equipment you have installed.
To start, describe the hardware, the number of units and the connectivity you need, and Reboot Monkey will return a quote scoped to that job.
How Reboot Monkey Works
These terms apply in every facility in Ouagadougou where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Ouagadougou?
Rack and stack covers installing, mounting and cabling new hardware in a customer's rack in Ouagadougou. Reboot Monkey engineers carry out the cabling, labelling and power-on checks. Quotes are on request, and prices depend on the customer and the size of the job. A second, briefed Reboot Monkey engineer is named as backup for every customer site.
Do you work in every datacenter in Ouagadougou?
Reboot Monkey engineers work in any facility in Ouagadougou where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Ouagadougou?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Ouagadougou?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your rack and stack in Ouagadougou
Send the hardware list and connectivity needs, and Reboot Monkey will quote the job. Prices are quoted on request.