Skip to content

Ecuador · Quito

Data Center Migration in Quito

Reboot Monkey moves equipment between racks, rooms or facilities in Quito. Engineers are dispatched to the customer's facility, and the split of who disconnects, reconnects and tests each system is agreed per project. A second, briefed engineer is named as backup for every customer site.

Data Center Migration

  • 8

    services detailed for Quito

  • 1

    agreement for every city

Plan your move in Quito

Tell us what needs to move, where it goes and who on your side takes part. Prices are quoted on request and depend on the customer and the size of the job.

In depth

Data Center Migration: 6 sections, open any to read more.

Data Center Migration in Quito

Cirion Quito - QUI2 stands on Juan Berrezueta y Alonso Lopez in Quito. A migration between buildings, or between rooms and racks inside one building, is a physical project with a sequence: equipment is identified, disconnected, moved, reinstalled, cabled and tested. Reboot Monkey is a third-party datacenter services operator. It does not own or run data centers, and it is not a hosting company. It sells rack space, IP transit, leased IP addresses, network connectivity and data-centre hardware, together with the services that deliver, install and support them, inside facilities that other companies own and run. For a migration, that means one party can handle the hardware move and the connectivity that goes with it. Access arrangements for the move are therefore part of project planning, agreed before the equipment is touched. Server migration, in the terms Reboot Monkey uses, is moving equipment between racks, rooms or facilities. A move that leaves hardware behind usually ends with data center decommissioning, the removal and disposal of retired hardware, which can be scoped into the same project.

Datacenter Facilities in Quito

Data centres in Quito, ordered by the number of networks present:

  • Cirion Quito - QUI2, Juan Berrezueta y Alonso Lopez, EC170110 Quito: 9 networks; carriers Cirion
  • EdgeUno Datacenter Quito Ecuador (UIO1) (EdgeUno, Inc.), Ave. Naciones Unidas E6-99 Edificio Banco Bolivariano, RGF8+MV Quito: 4 networks; carriers EdgeUno
  • Cirion Quito - QUI1, Calle Juan Diaz, 37-111, 170135 Quito: 2 networks; carriers Cirion
  • Telconet Cloudcenter Quito (Telconet S.A), De Los Aceitunos E5-85 y Ave. Eloy Alfaro, 0000 Quito: 1 network; carriers Cirion
  • CNT EP - PICHINCHA - UIOETT (CORPORACION NACIONAL DE TELECOMUNICACIONES CNT EP), Quito, 170156
  • CNT EP - PICHINCHA - UIOINQ (CORPORACION NACIONAL DE TELECOMUNICACIONES CNT EP), Jorge Drom y Gaspar de Villaroel, 170158 Quito
  • Edificio Transeletric (Transnexa Ecuador), Av 6 de Diciembre N26-235 Psio 5, 593 Quito
  • Edificio Transeletric Quito (Transnexa Ecuador), Av 6 de Diciembre N26-235 Psio 5, 593 Quito
  • Opticom Quito DC01, Nueva Aurora Av. Romel Vasquez, S50-193, 170705 Quito

Our Data Center Migration Services

A migration project in Quito can combine several services, depending on what the customer needs moved and who on the customer's side takes part.

  • Server migration: moving equipment between racks, rooms or facilities, with the physical work carried out by Reboot Monkey engineers on site.
  • Rack and stack: installing, mounting and cabling new hardware at the destination, including where replacement equipment arrives instead of the old units being moved.
  • Connectivity for the new rack: Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack.
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge, for faults found while equipment is brought back into service.
  • Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks, useful during the cutover while the customer's own staff work remotely.
  • Data center decommissioning and IT asset disposition (ITAD): removal and disposal of retired hardware, with data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC, which can be switched on for the relocated equipment.

Why Reboot Monkey

Reboot Monkey can run the whole physical move or work alongside the customer's own team. Who disconnects, reconnects and tests the equipment is agreed per project, so a customer with strong in-house staff can keep control of testing, and a customer with a small team can hand over the full sequence.

For every customer site, a second, briefed Reboot Monkey engineer is named as backup. If the primary engineer is unavailable on a migration day, the backup already knows the site, the plan and the access requirements, so the schedule does not depend on one person.

The work is not tied to one building or one vendor relationship. Reboot Monkey sells the rack space, IP transit, leased IP addresses and network for the destination rack alongside the move itself, which keeps ordering, installation and support in a single commercial relationship rather than split across several suppliers.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company with sites beyond Quito, the same approach to scoping and execution applies elsewhere.

Prices are quoted on request and depend on the customer and the size of the job. To scope a move, send the current equipment locations, the destination, the target dates and the division of work you prefer through the contact page.

How Reboot Monkey Works

These terms apply in every facility in Quito where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Data Center Migration

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does data center migration cover in Quito?

Data center migration in Quito covers moving equipment between racks, rooms or facilities. Reboot Monkey engineers can add rack and stack at the destination, cabling in the customer's rack, orders for cross connects and carrier circuits, and removal of retired hardware. Who disconnects, reconnects and tests the equipment is agreed per project, and the facility operator's site rules apply.

Do you work in every datacenter in Quito?

Reboot Monkey engineers work in any facility in Quito where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Quito?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with data center migration in Quito?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center migration work is scheduled under the operator's rules.

Plan your move in Quito

Tell us what needs to move, where it goes and who on your side takes part. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote