Skip to content

Ecuador · Quito

Rack and Stack in Quito

Rack and stack in Quito means installing, mounting and cabling new hardware in a rack inside a data centre that another company owns and runs. Reboot Monkey engineers carry out the work, and quotes are given on request.

Rack and Stack

  • 8

    services detailed for Quito

  • 1

    agreement for every city

Plan your rack and stack in Quito

Send the hardware list, the destination racks and the connectivity you need. Quotes are on request.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Quito

Cirion Quito - QUI2 stands on Juan Berrezueta y Alonso Lopez in Quito. Rack and stack is the work that turns delivered hardware into equipment that is mounted, cabled and ready to run: installing, mounting and cabling new hardware in the racks it is meant for. Reboot Monkey is a third-party datacenter services operator, not a hosting company and not a datacenter owner, so the work happens inside data centres that other companies own and run. The scope of a job follows from the hardware itself: which servers, switches or storage units are arriving, which racks they belong in and how each one should be connected. Rack and stack work covers cabling, labelling and power-on checks, and quotes are on request. Prices are quoted on request and depend on the customer and the size of the job, so the first step is a short description of the equipment and the rack position it is meant for. For a buyer in Quito, the practical question is who does the physical work and how it is controlled. Reboot Monkey assigns field engineers to the customer site, and a second, briefed Reboot Monkey engineer is named as backup for every customer site. That means a delivery date does not depend on a single person being available.

Our Rack and Stack Services

Data centres in Quito, ordered by the number of networks present:

  • Cirion Quito - QUI2, Juan Berrezueta y Alonso Lopez, EC170110 Quito: 9 networks; carriers Cirion
  • EdgeUno Datacenter Quito Ecuador (UIO1) (EdgeUno, Inc.), Ave. Naciones Unidas E6-99 Edificio Banco Bolivariano, RGF8+MV Quito: 4 networks; carriers EdgeUno
  • Cirion Quito - QUI1, Calle Juan Diaz, 37-111, 170135 Quito: 2 networks; carriers Cirion
  • Telconet Cloudcenter Quito (Telconet S.A), De Los Aceitunos E5-85 y Ave. Eloy Alfaro, 0000 Quito: 1 network; carriers Cirion
  • CNT EP - PICHINCHA - UIOETT (CORPORACION NACIONAL DE TELECOMUNICACIONES CNT EP), Quito, 170156
  • CNT EP - PICHINCHA - UIOINQ (CORPORACION NACIONAL DE TELECOMUNICACIONES CNT EP), Jorge Drom y Gaspar de Villaroel, 170158 Quito
  • Edificio Transeletric (Transnexa Ecuador), Av 6 de Diciembre N26-235 Psio 5, 593 Quito
  • Edificio Transeletric Quito (Transnexa Ecuador), Av 6 de Diciembre N26-235 Psio 5, 593 Quito
  • Opticom Quito DC01, Nueva Aurora Av. Romel Vasquez, S50-193, 170705 Quito

Connecting the rack to the network

A mounted server is only useful once it is connected, and Reboot Monkey sells the network for the rack as well as installing the hardware. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and from the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack. The ordering and the physical patching sit with one supplier, so a new rack does not need separate arrangements for hardware installation and connectivity.

The same engineers can continue the work after the first installation. Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. Server migration covers moving equipment between racks, rooms or facilities, and hardware monitoring means the Reboot Monkey NOC monitors the customer's servers and network equipment.

When equipment reaches the end of its life, data center decommissioning removes and disposes of the retired hardware, and IT asset disposition (ITAD) covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case.

Why Reboot Monkey

Reboot Monkey is vendor-neutral: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, and it does not run the buildings those services are delivered in. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, so a company with equipment in Quito and in other places can use one supplier for the physical work.

The operating model is simple to state. The operator of the facility sets the site rules for access, power and cooling. Reboot Monkey engineers work within those rules, install and cable the hardware, label it, run the power-on checks and hand the rack back in a state that the customer's own team or a later remote hands request can pick up. A named backup engineer is briefed for every customer site.

For procurement, the commercial position is equally direct: prices are quoted on request and depend on the customer and the size of the job. A request that lists the hardware, the destination racks and the connectivity needed gives enough to scope the work.

How Reboot Monkey Works

These terms apply in every facility in Quito where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Quito?

Rack and stack covers installing, mounting and cabling new hardware, and the work includes cabling, labelling and power-on checks. Reboot Monkey engineers carry it out inside the facility, working under the operator's site rules. A second, briefed engineer is named as backup for every customer site. Quotes are on request and depend on the customer and the size of the job.

Do you work in every datacenter in Quito?

Reboot Monkey engineers work in any facility in Quito where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Quito?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Quito?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your rack and stack in Quito

Send the hardware list, the destination racks and the connectivity you need. Quotes are on request.

Published:

Get a quote