Skip to content

Egypt · Cairo

Rack and Stack in Cairo

Reboot Monkey installs, mounts and cables new hardware in Cairo data centres that other companies own and run. Rack and stack work covers cabling, labelling and power-on checks, and quotes are on request, sized to the customer and the job.

Rack and Stack

  • 8

    services detailed for Cairo

  • 1

    agreement for every city

Plan your Cairo installation

Send the equipment list, the target rack and the date you need the hardware installed.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Cairo

Ramses Exchange stands on Ramses Street in Cairo. For a buyer placing new servers, switches or storage in a Cairo facility, the task is the same wherever the hardware lands: it has to be unboxed, mounted, cabled, labelled and powered on in a way that the customer's own team can operate and support afterwards. Rack and stack is the installing, mounting and cabling of new hardware, and Reboot Monkey delivers it as a physical datacenter service inside facilities that other companies own and run. Reboot Monkey is not a hosting company and does not own the building, so the hardware stays yours and the work is done in the rack you already hold or have ordered. A typical request begins with a short brief from the customer: what equipment is arriving, how many racks or rack units it will occupy, and which connections it needs. From that brief Reboot Monkey plans the installation, assigns an engineer and confirms the visit. When the work is finished, the customer receives confirmation of what was installed and where, so that asset records and change tickets can be closed against something concrete rather than a verbal report.

Datacenter Facilities in Cairo

Data centres in Cairo, ordered by the number of networks present:

  • Ramses Exchange (Telecom Egypt), 26 Ramses Street, Cairo: 4 networks
  • GPX Cairo 1 (GPX Global Systems, Inc), Heliopolis, 00000 Cairo: 3 networks

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks. In practice that means the following, in the order an installation normally runs.

  • Mounting: servers, switches and other equipment fitted into the rack at the positions the customer specifies.
  • Cabling: power and data cables run and dressed inside the customer's rack, with the cabling installed and patched by Reboot Monkey engineers.
  • Labelling: each cable and device marked so that later work, including remote hands tasks, can be carried out without tracing runs by hand.
  • Power-on checks: equipment powered on and checked after installation, so faults surface during the visit rather than after hand-over.
  • Connectivity: Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and engineers patch the cabling in your rack, so the network arrives together with the hardware.
  • Fibre inspection: a fibre inspection scope and cleaning kit are available on request for links that need checking before they carry traffic.

Why Reboot Monkey

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. For a CTO, IT director or procurement manager, that separation matters for one practical reason: the party installing your hardware is not the party selling you the building, so the work is scoped to your equipment and your rack. Within those rules, a second, briefed Reboot Monkey engineer is named as backup for every customer site, so a single absence does not stall a scheduled installation. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company that deploys hardware in several countries, this means the same service and the same way of working can be requested for a Cairo installation and for sites elsewhere, rather than negotiated afresh with a different local supplier each time. Prices are quoted on request and depend on the customer and the size of the job. To start, send the equipment list, the target rack and the date you need it installed, and Reboot Monkey will respond with a quote for the work.

How Reboot Monkey Works

These terms apply in every facility in Cairo where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Cairo?

In Cairo, rack and stack is the installing, mounting and cabling of new hardware in the customer's rack. The work covers cabling, labelling and power-on checks, carried out by Reboot Monkey engineers under the facility operator's site rules. Reboot Monkey can also order the cross connects and carrier circuits the equipment needs. Quotes are on request.

Do you work in every datacenter in Cairo?

Reboot Monkey engineers work in any facility in Cairo where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Cairo?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Cairo?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your Cairo installation

Send the equipment list, the target rack and the date you need the hardware installed.

Published:

Get a quote