Latvia · Riga
Data Center Decommissioning in Riga
Data center decommissioning in Riga is the removal and disposal of retired hardware from a customer's racks. Reboot Monkey engineers record each serial number, asset tag and rack position, remove servers, switches and storage arrays with their cabling and rail kits, and log every item as it leaves.
In Data Center Decommissioning
- Data Center Decommissioning
- Colocation
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Data Center Decommissioning
8
services detailed for Riga
1
agreement for every city
Plan your decommissioning in Riga
Send the list of racks and equipment to be retired and Reboot Monkey will quote the job. Prices are quoted on request and depend on the customer and the size of the job.
In depth
Data Center Decommissioning: 6 sections, open any to read more.
Data Center Decommissioning in Riga
LVRTC TV Tower stands on Zakusalas krastmala in Riga. Retiring hardware from a building like this is rarely a single event. It starts with a decision to close a rack, a room or a whole deployment, and it ends only when every asset has been accounted for and the space is returned to the operator. Reboot Monkey is a third-party datacenter services operator: it works inside data centres that other companies own and run, and it does not operate a facility of its own in Riga.
For a CTO, IT Director or procurement manager, the practical question is control. Which assets leave, in what order, on which date, and what record exists afterwards. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Reboot Monkey takes the retirement list from the customer, schedules the work around the access the facility allows, and carries it out in the customer's own racks.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Riga is handled as one more site in that same process, with the same record-keeping and the same documented steps, so a decommissioning started here follows the method used everywhere else.
Datacenter Facilities in Riga
Data centres in Riga, ordered by the number of networks present:
- LVRTC TV Tower (VAS "Latvijas Valsts radio un televizijas centrs"), Zakusalas krastmala 1, LV-1050 Riga: 33 networks; carriers Arelion and RETN
- Perses 2 - Riga (Santa Monica Networks), Perses 2, LV-1050 Riga: 19 networks; carriers FIORD
- RETN AD DC, 73, A. Deglava str., LV-1082 Riga: 6 networks; carriers RETN
- Sigmanet Data Centre (LUMII), Raina blvd. 29, LV-1459 Riga: 3 networks; carriers RETN
- Talejas iela 1 (VAS "Latvijas Valsts radio un televizijas centrs"), Talejas iela 1, LV-1014 Riga: 2 networks
- Balticom Datacenter: 1 network
- Versija SIA, Arhitektu iela 1, Perses iela 2 - TB, LV Riga
Our Data Center Decommissioning Services
Data center decommissioning, as Reboot Monkey defines it, is removing and disposing of retired hardware. In Riga the work is organised as a sequence the customer can follow and audit against their own asset register.
- Recording: serial numbers, asset tags and rack positions are recorded against the customer's asset list before anything is touched.
- Scheduling: removal is agreed with the customer in advance, including any out-of-hours or weekend windows the facility requires.
- Scope: decommissioning covers servers, switches, storage arrays, and their cabling and rail kits.
- Logging: every item is logged as it is removed, so the list of what left the rack matches the list of what was planned.
- Disposal route: where retired equipment needs data wiping, on-site shredding or degaussing, collection and transport, or resale and buyback, this is handled as IT asset disposition (ITAD). Resale and buyback are quoted case by case, and the processing is carried out by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Pricing basis: prices are quoted on request and depend on the customer and the size of the job.
Why Reboot Monkey
A decommissioning goes wrong in ordinary ways: an unlabelled cable pulled by mistake, a unit missing from the list, a window missed because the facility needed notice. The way Reboot Monkey works is aimed at those points. The asset list is the reference for the whole job, items are logged as they come out, and the removal date is fixed with the customer before the engineer arrives.
Coverage of the site does not depend on one person. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a decommissioning that spans several days or several visits does not stall if the first engineer is unavailable.
Decommissioning also sits alongside the other services the customer may need during a wind-down. If equipment is leaving one rack for another, that is server migration, which moves equipment between racks, rooms or facilities. If the customer needs a hand with a task during the project, remote hands carry out physical tasks on the customer's instruction, and smart hands cover technical work that needs diagnostic judgement and configuration knowledge. Connectivity is part of the same picture: Reboot Monkey orders cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack, which is useful when circuits need to be ended or moved as part of the retirement.
The result for the buyer is a bounded piece of work with a known start, a recorded process and a list that can be checked at the end.
How Reboot Monkey Works
These terms apply in every facility in Riga where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Frequently Asked Questions
What does data center decommissioning cover in Riga?
In Riga, decommissioning covers servers, switches, storage arrays, and their cabling and rail kits. Reboot Monkey engineers record serial numbers, asset tags and rack positions against the customer's asset list, agree the removal schedule in advance, including any out-of-hours or weekend windows the facility requires, and log every item as it is removed.
Do you work in every datacenter in Riga?
Reboot Monkey engineers work in any facility in Riga where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Riga?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with data center decommissioning in Riga?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center decommissioning work is scheduled under the operator's rules.
Plan your decommissioning in Riga
Send the list of racks and equipment to be retired and Reboot Monkey will quote the job. Prices are quoted on request and depend on the customer and the size of the job.