Latvia · Riga
Smart Hands in Riga
Smart hands is technical work inside a data center that needs diagnostic judgement and configuration knowledge, not only a reboot or a cable swap. Reboot Monkey dispatches field engineers to your equipment in Riga and provides on-site IT support in Riga data centers, under the facility operator's site rules.
In Smart Hands
- Smart Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- ITADon request
Smart Hands
8
services detailed for Riga
1
agreement for every city
Request Smart Hands in Riga
Describe the fault or the change you need and Reboot Monkey will quote the job.
In depth
Smart Hands: 6 sections, open any to read more.
Smart Hands in Riga
LVRTC TV Tower stands on Zakusalas krastmala in Riga. Smart hands work in a city like this begins when something in your rack needs a decision, not a button press. A server drops off the network and the cause could be a cable, a transceiver, a switch port or a configuration fault. A person who can read the symptoms, test each possibility in turn and change the setup is what separates smart hands from remote hands, where an engineer carries out a physical task exactly as you instruct it. Reboot Monkey is a third-party datacenter services operator. It does not own or run the buildings it works in. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centers that other companies own and run. Smart hands is one of those services, and it applies to equipment you already host as well as to equipment Reboot Monkey supplies. You describe the problem or the change you need. The engineer works through it on the floor, and you receive the outcome rather than a list of questions to answer first.
Datacenter Facilities in Riga
Data centres in Riga, ordered by the number of networks present:
- LVRTC TV Tower (VAS "Latvijas Valsts radio un televizijas centrs"), Zakusalas krastmala 1, LV-1050 Riga: 33 networks; carriers Arelion and RETN
- Perses 2 - Riga (Santa Monica Networks), Perses 2, LV-1050 Riga: 19 networks; carriers FIORD
- RETN AD DC, 73, A. Deglava str., LV-1082 Riga: 6 networks; carriers RETN
- Sigmanet Data Centre (LUMII), Raina blvd. 29, LV-1459 Riga: 3 networks; carriers RETN
- Talejas iela 1 (VAS "Latvijas Valsts radio un televizijas centrs"), Talejas iela 1, LV-1014 Riga: 2 networks
- Balticom Datacenter: 1 network
- Versija SIA, Arhitektu iela 1, Perses iela 2 - TB, LV Riga
Our Smart Hands Services
Smart hands covers technical work that depends on diagnostic judgement and configuration knowledge. The related services below are defined separately, so you can match the request to the right one.
- Smart hands: fault diagnosis and configuration work carried out at the rack by a Reboot Monkey engineer.
- Remote hands: physical tasks done on your instruction, such as reboots, cable checks, component swaps and visual checks.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Data center decommissioning: removing and disposing of retired hardware.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on your site.
- Hardware monitoring: monitoring of your servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey
Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and from the carriers present in the facility, and its engineers install and patch the cabling in your rack. A connectivity fault and the smart hands visit that fixes it therefore sit with one supplier, and a fibre inspection scope and cleaning kit are available on request when a link needs to be checked at the connector. Continuity matters when you cannot be in Riga yourself. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a visit does not depend on one person being available. Prices are quoted on request and depend on the customer and the size of the job. Send the symptom or the change you need, and the quote follows from the scope of that request.
How Reboot Monkey Works
These terms apply in every facility in Riga where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does smart hands cover in Riga?
Smart hands covers technical work in a Riga data center that needs diagnostic judgement and configuration knowledge. Simple physical tasks such as reboots, cable checks and component swaps are defined separately as remote hands, so you can choose the service that matches the job.
Do you provide on-site IT support in Riga data centers?
Yes. Reboot Monkey dispatches field engineers to work on your equipment inside the facility. You send the request, an engineer is assigned, and a second, briefed engineer is named as backup for your site. Prices are quoted on request.
Do you work in every datacenter in Riga?
Reboot Monkey engineers work in any facility in Riga where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Riga?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with smart hands in Riga?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Request Smart Hands in Riga
Describe the fault or the change you need and Reboot Monkey will quote the job.