Skip to content

Mauritius · Port Louis

Server Migration in Port Louis

Server migration in Port Louis means moving equipment between racks, rooms or facilities. Reboot Monkey engineers carry out the physical move inside the data centre, either running the whole job or working alongside your own team, with the split of tasks agreed per project.

Server Migration

  • 8

    services detailed for Port Louis

  • 1

    agreement for every city

Plan Your Server Migration in Port Louis

Tell Reboot Monkey what has to move and where. Prices are quoted on request and depend on the customer and the size of the job.

In depth

Server Migration: 6 sections, open any to read more.

Server Migration in Port Louis

Data Communications Port Louis stands on Angle MGR Gonin Mgr. Gonin in Port Louis. Reboot Monkey does not own or operate the data centre. It sends engineers to the customer's equipment and carries out the move there. Server migration, as Reboot Monkey defines it, is moving equipment between racks, rooms or facilities. That covers a move within one hall, a move from one room to another, and a move between two buildings. It is a different task from installing new hardware, which is rack and stack, and from removing retired hardware, which is data center decommissioning. Many projects combine them, for example a migration that ends with the old rack being cleared out, and each part is scoped as its own piece of work. The work is physical. It covers the handling, cabling and re-establishing of equipment in its new position. Software-level and application-level decisions stay with the customer's own team.

Datacenter Facilities in Port Louis

Data centres in Port Louis, ordered by the number of networks present:

  • Data Communications Port Louis (Data Communications Limited DCL), Angle MGR Gonin Mgr. Gonin, 11328 Port Louis
  • Government Online Centre (National Computer Board), 5th B Cyber Tower 1, Port Louis

Our Server Migration Services

A migration request starts with the customer describing what has to move, from where and to where. Reboot Monkey then agrees the scope in writing before any engineer is dispatched. Prices are quoted on request and depend on the customer and the size of the job.

The most important decision in any project is who does what. Reboot Monkey can run the whole physical move or work alongside the customer's own team; who disconnects, reconnects and tests the equipment is agreed per project. A customer with in-house staff can keep the testing step, while a customer without a local presence can hand over the entire sequence.

A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the plan does not depend on a single person being available on the day.

The steps of a typical request look like this:

  • The customer lists the equipment to move and the source and destination locations.
  • Reboot Monkey and the customer agree the scope and who disconnects, reconnects and tests.
  • A Reboot Monkey engineer and a briefed backup engineer are named for the site.
  • Cabling is installed and patched in the customer's rack at the destination.
  • The customer receives confirmation of the completed work.

Why Reboot Monkey

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters, which keeps the advice on a migration independent of any building.

That matters when a move includes network. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack. A migration that changes facility can therefore be planned with the connectivity and the physical move handled together, rather than split across separate suppliers.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company moving equipment between sites in different countries, the same way of working applies at both ends of the move.

If the equipment also needs help after the move, the remote hands service covers physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Retired hardware left behind in the old location is handled through data center decommissioning, which covers removing and disposing of it.

How Reboot Monkey Works

These terms apply in every facility in Port Louis where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Server Migration

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does server migration cover in Port Louis?

Server migration covers moving equipment between racks, rooms or facilities. Reboot Monkey can run the whole physical move or work alongside your own team, and who disconnects, reconnects and tests the equipment is agreed per project. Engineers work under the facility operator's site rules, and a second briefed engineer is named as backup for every customer site.

Do you work in every datacenter in Port Louis?

Reboot Monkey engineers work in any facility in Port Louis where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Port Louis?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with server migration in Port Louis?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the server migration work is scheduled under the operator's rules.

Plan Your Server Migration in Port Louis

Tell Reboot Monkey what has to move and where. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote