Skip to content

Mauritius · Port Louis

Rack and Stack in Port Louis

Rack and stack in Port Louis means installing, mounting and cabling new hardware in a rack inside a data centre that another company owns and runs. Reboot Monkey engineers carry out the cabling, labelling and power-on checks, and quotes are given on request.

Rack and Stack

  • 8

    services detailed for Port Louis

  • 1

    agreement for every city

Plan your rack and stack in Port Louis

Send the equipment list and the target rack. Reboot Monkey replies with a quote.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Port Louis

Data Communications Port Louis stands on Angle MGR Gonin Mgr. Gonin in Port Louis. Hardware that arrives for a deployment in the city has to be unboxed, mounted in the rack, cabled and brought up before it can carry load, and that physical work is what rack and stack covers. Reboot Monkey defines it as installing, mounting and cabling new hardware.

Reboot Monkey is a third-party datacenter services operator. It does not host customer workloads and it does not own the buildings it works in. The racks, the power and the access rules belong to the facility operator, and the work is planned around that.

For a CTO or IT Director, the practical question is who touches the equipment and what is handed back at the end. For a procurement manager, it is whether one supplier can cover the hardware, the network and the installation. Reboot Monkey sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, so the installation can be ordered alongside the rest of the deployment instead of being sourced separately.

Datacenter Facilities in Port Louis

Data centres in Port Louis, ordered by the number of networks present:

  • Data Communications Port Louis (Data Communications Limited DCL), Angle MGR Gonin Mgr. Gonin, 11328 Port Louis
  • Government Online Centre (National Computer Board), 5th B Cyber Tower 1, Port Louis

Our Rack and Stack Services

A rack and stack job in Port Louis is scoped around the equipment you are deploying. The scope covers cabling, labelling and power-on checks. Quotes are on request, and prices depend on the customer and the size of the job, so a request that names the hardware, the quantity and the target rack gives the clearest basis for a quote.

The work usually runs in this order:

1. You send the equipment list, the rack location and the cabling plan, or ask Reboot Monkey to propose one. 2. Reboot Monkey confirms the scope and issues a quote. 3. A Reboot Monkey engineer is dispatched to the facility and mounts the hardware in the rack. 4. The engineer cables each device, labels the cables and ports, and runs the power-on checks. 5. You receive confirmation that the hardware is installed, labelled and powered on.

Connectivity is part of the same job when you need it. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. That keeps the circuit order and the physical patching with one party.

Where a fibre link needs inspection before it goes live, a fibre inspection scope and cleaning kit are available on request.

Rack and stack is one of several physical services Reboot Monkey runs. Remote hands covers tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. Server migration moves equipment between racks, rooms or facilities, and data center decommissioning removes and disposes of retired hardware. Rack and stack is the entry point for new equipment, and the others take over once it is in service.

  • Mounting of new servers and network equipment in the rack
  • Cabling and labelling of cables and ports
  • Power-on checks after installation
  • Cross connect and carrier circuit orders, with patching in your rack
  • Fibre inspection scope and cleaning kit on request

Why Reboot Monkey

Reboot Monkey works inside data centres that other companies own and run. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Your hardware goes into the facility you have already chosen, and the installation follows the rules of that site. Continuity is built into the arrangement. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a job does not depend on a single person being available on the day. Reboot Monkey is not a hosting company and has no interest in moving your workloads onto its own platform. It supplies rack space, transit, addresses, network and hardware, and the people who install and support them. That separation matters when you are comparing a single supplier for the whole deployment against several specialist vendors, because the installation work is priced and delivered on its own terms and quoted on request. For a deployment in Port Louis that means the same way of working you may already use elsewhere can be applied here, with one point of contact for the request, the quote and the follow-up. Once the hardware is in service, the Reboot Monkey NOC can monitor your servers and network equipment, so the team that installed the equipment is connected to the team that watches it.

How Reboot Monkey Works

These terms apply in every facility in Port Louis where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Port Louis?

Rack and stack in Port Louis covers installing, mounting and cabling new hardware in the customer's rack. Reboot Monkey engineers handle the cabling, labelling and power-on checks, and can order cross connects and carrier circuits and patch them in the rack. Quotes are on request and depend on the customer and the size of the job.

Do you work in every datacenter in Port Louis?

Reboot Monkey engineers work in any facility in Port Louis where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Port Louis?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Port Louis?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your rack and stack in Port Louis

Send the equipment list and the target rack. Reboot Monkey replies with a quote.

Published:

Get a quote