Skip to content

Rack and Stack Services in Ireland

By Reboot Monkey Team

Reboot Monkey sends certified engineers to Equinix Dublin, Digital Realty, and data centres across Ireland to physically install, cable, and power up your servers. No site visit required from your team.

Rack and Stack Services in Ireland

What Rack and Stack Covers in an Irish Data Centre

Rack and stack is the hands-on process of physically deploying server hardware inside a colocation data centre. It covers everything from the moment your equipment arrives at the facility loading bay to the point where each device is seated, secured, cabled, and confirmed powered on. Reboot Monkey performs this work in person at the data centre. Your team stays remote. A standard rack and stack engagement in Ireland includes unpacking and inspecting hardware on arrival, rail kit assembly and server mounting in the allocated rack unit positions, structured copper and fibre cabling to patch panels and top-of-rack switches, power connection to PDUs and confirmation of draw at the circuit level, cable labelling and dressing to facility standards, IPMI or iDRAC verification to confirm out-of-band management access is reachable, and a documented completion report with photos of the finished rack. For larger deployments, Reboot Monkey can also handle KVM-over-IP installation, initial BIOS configuration checks, firmware version recording, and handoff to a remote engineer for OS provisioning once physical installation is confirmed. The scope is agreed before the engagement begins so there are no surprises on billing or timeline.
  • Unpacking, inspection, and asset tagging on arrival at the facility
  • Rail kit assembly and rack unit mounting to your layout diagram
  • Structured copper and fibre cabling to patch panels and switches
  • Power connection to PDUs with circuit draw confirmation
  • IPMI, iDRAC, or iLO out-of-band management verification
  • Cable labelling, dressing, and tie-down to facility standards
  • Completion report with photos for asset management and audit records

Data Centre Coverage: Dublin, Cork, and Beyond

The Irish data centre market is heavily concentrated in Dublin, which serves as one of the European Union's primary infrastructure hubs. Major hyperscalers including Amazon, Google, Meta, and Microsoft have significant Dublin presences, and international enterprises routinely choose Dublin as their EU-gateway colocation location because of the country's EU membership, GDPR compliance posture, and consistently strong subsea connectivity to North America and the rest of Europe. Reboot Monkey covers all major Dublin facilities. Equinix operates four data centres in the city under the DB1, DB2, DB3, and DB4 designations. These are the flagship interconnection-dense facilities in Ireland, particularly attractive for enterprises that need direct cross-connects to cloud on-ramp services. Digital Realty runs a separate Dublin campus. Additional facilities in the Dublin area include CyberCity in Blanchardstown, EVOQUE data centres, and several carrier-neutral options used by Irish enterprises and multinationals. Cork is Ireland's second city, located approximately 220 kilometres south of Dublin. Although Cork's data centre market is smaller, it is a meaningful secondary market, particularly for Irish-headquartered companies that want to place disaster recovery or backup infrastructure outside the Dublin metropolitan area. Reboot Monkey can dispatch engineers to Cork data centre facilities as well as Dublin, covering the full national footprint. Ireland's connectivity infrastructure supports the data centre market directly. INEX, the Internet Neutral Exchange Association CLG, operates Ireland's national internet exchange points in Dublin. Connectivity through INEX peers is available to enterprises colocating in Dublin, making it an efficient location for latency-sensitive workloads targeting European and transatlantic audiences.
  • Equinix Dublin: DB1, DB2, DB3, DB4 facilities covered
  • Digital Realty Dublin campus and other multi-tenant facilities
  • CyberCity Blanchardstown and EVOQUE Dublin sites
  • Cork data centres for disaster recovery and secondary deployments
  • INEX-connected Dublin facilities for direct peering access
  • All carrier-neutral and operator-neutral data centres in Ireland

Scheduling, Lead Times, and SLAs

Rack and stack in Ireland is scheduled as a project engagement rather than a break-fix ticket. When you contact Reboot Monkey, the first step is a scope call to confirm the hardware list, rack layout, cabling requirements, and any facility-specific access procedures. Most facilities in Ireland, including Equinix Dublin, require advance visitor authorisation and in some cases an escort for first-time access. Reboot Monkey handles all facility access coordination on your behalf. For standard deployments of up to a full rack, Reboot Monkey can typically schedule work within 3 to 5 business days of scope confirmation, subject to facility access approval timelines. Larger multi-rack rollouts or builds requiring additional engineers are planned on a project basis with a detailed schedule agreed upfront. For time-sensitive situations, an expedited same-day or next-day option is available at a surcharge, subject to engineer availability in Dublin. Work is performed during business hours by default, but out-of-hours evening and weekend slots are available for deployments where the facility window or your operational requirements demand it. All work is conducted under a fixed-scope statement of work so that billing is predictable and there are no open-ended time-and-materials surprises. A completion report is delivered on the same day the work is finished.
  • Scope call and hardware confirmation before any work is booked
  • Facility access authorisation handled by Reboot Monkey
  • Standard deployments scheduled within 3 to 5 business days
  • Same-day and next-day expedited options available
  • Out-of-hours and weekend slots for time-sensitive builds
  • Fixed-scope statement of work with no open-ended billing
  • Same-day completion report with photos and cable documentation

Power Standards and Cabling in Irish Data Centres

Ireland runs on 230V AC at 50Hz, the standard used across continental Europe and the British Isles. Data centres in Ireland supply power through PDUs that are typically provisioned on a dual-feed A and B circuit basis for redundancy. The specific connector types depend on the facility and the power density of the deployment. IEC C13 and C14 connectors cover most 1U and 2U servers. Higher-draw compute and storage platforms often require C19 and C20 connectors. Three-phase power via IEC 60309 connectors is used for high-density cabinets drawing 10kW or more per rack. Reboot Monkey engineers arrive at an Irish data centre already familiar with the power provisioning approach at that specific site. Before the engagement, the team reviews the power allocation letter or cabinet handoff documentation the facility has provided so that circuit labelling is understood before anything is plugged in. Each server is connected to the correct A and B feed circuits, and power draw at the PDU level is confirmed before the work is signed off. Structured cabling follows the facility's labelling and dressing standards. Most major Dublin facilities have strict requirements around cable management, particularly in shared or open-floor environments. Reboot Monkey uses pre-cut patch cables to specification lengths where possible and documents every connection in the completion report. Fibre is handled with appropriate bend radius management and connector protection. Copper runs are tested for connectivity where access to a test instrument is available in the facility.
  • 230V / 50Hz standard across all Irish data centres
  • IEC C13/C14 for standard servers, C19/C20 for high-draw equipment
  • IEC 60309 three-phase for high-density deployments above 10kW
  • Dual A/B feed connection and circuit draw confirmation at PDU level
  • Pre-cut patch cables to spec lengths for clean cable management
  • Fibre handled with bend radius compliance and connector protection
  • All connections documented in the completion report

Vendor-Neutral Coverage Across All Irish Facilities

Reboot Monkey is a third-party data centre services provider. This means the company operates independently of any specific facility, hardware vendor, or managed service provider. When you engage Reboot Monkey for rack and stack work in Ireland, the engineers show up at whichever facility you colocate in, regardless of who operates it. There is no requirement to use a facility that Reboot Monkey has a commercial relationship with, and there is no upselling toward a particular colocation provider or hardware brand. This vendor-neutral position matters because data centre operators in Ireland, like those anywhere, will typically refer you to their own in-house hands or to a managed service provider with which they have a commercial arrangement. That arrangement may or may not align with your cost expectations or service standards. Reboot Monkey operates outside those relationships and charges for the actual work performed. For enterprises that use multiple colocation sites across Europe, Reboot Monkey's global coverage means the same engagement model applies whether the next project is in Dublin, Frankfurt, Amsterdam, London, or elsewhere. You work with one vendor and one process across your entire estate, rather than managing a different local contractor in each country. Rack and stack engagements in Ireland can be complemented with <a href="/en/remote-hands/ireland/">remote hands support</a> for ongoing ad hoc tasks after the initial build is complete, or with <a href="/en/smart-hands/ireland/">smart hands services</a> for more technically complex requests that require an engineer with configuration skills. For hardware moves or multi-facility builds, Reboot Monkey also covers <a href="/en/server-migration/ireland/">server migration in Ireland</a> and <a href="/en/data-center-migration/ireland/">full data centre migration projects</a>.
  • No facility affiliation: covers any data centre in Ireland
  • Independent of hardware vendors and managed service providers
  • No commercial referral arrangements that affect your pricing
  • Consistent process whether you colocate in Dublin or Cork
  • Global coverage for enterprises managing infrastructure across Europe
  • Single vendor relationship across multi-country estates

Who Uses Rack and Stack Services in Ireland

The most common buyers of rack and stack services in Ireland fall into a few distinct categories, each with different reasons for outsourcing the physical installation work. Multinational enterprises with European infrastructure requirements frequently colocate in Dublin as their EU presence. Their engineering teams are typically based in the United States, the United Kingdom, or elsewhere in Europe, and flying someone to Dublin for a one-day or two-day rack installation is expensive and disruptive. Sending Reboot Monkey instead is a straightforward cost decision. Irish-headquartered companies expanding their on-premises infrastructure often lack the specialist skills for structured cabling and power management at data centre grade. Their internal IT team may be fully capable of managing systems once they are running, but the physical installation is outside their day-to-day experience. Rack and stack as a one-off professional service fills that gap without requiring a permanent hire. Cloud-repatriation and hybrid cloud projects are a growing source of demand. Enterprises that previously ran workloads entirely in public cloud are bringing compute back into colocated hardware for cost or data sovereignty reasons. These deployments are often larger and more technically complex, involving significant power planning and cabling to support high-density configurations. For enterprises operating in GDPR-regulated industries, keeping data within Irish jurisdiction while still getting professional physical services on-site is straightforward with a third-party provider that works inside existing colocated facilities. The data never leaves your contracted rack space. Reboot Monkey engineers perform the installation work and leave. Data sovereignty is maintained at the infrastructure level without needing to use a facility's in-house services team. If you are planning a rack and stack project in Ireland, whether it is a single server, a full cabinet build, or a multi-rack rollout across a Dublin campus, contact Reboot Monkey to discuss scope and availability.
  • Multinational enterprises colocating in Dublin as their EU gateway
  • Remote teams deploying hardware without sending staff to Ireland
  • Irish companies expanding on-premises infrastructure without specialist staff
  • Cloud-repatriation and hybrid cloud deployments requiring physical builds
  • GDPR-sensitive workloads where data must remain in Irish jurisdiction
  • Any organisation colocating in Ireland that needs hardware physically installed

Rack and Stack Ireland: Common Questions

Which data centres in Dublin does Reboot Monkey cover for rack and stack?

Reboot Monkey covers all major Dublin data centres including Equinix DB1, DB2, DB3, and DB4, Digital Realty Dublin, CyberCity Blanchardstown, and EVOQUE facilities. As a vendor-neutral provider, the team can work in any carrier-neutral or multi-tenant facility in Ireland where visitor access can be arranged. If you colocate in a facility not listed here, contact the team to confirm coverage.

Does Reboot Monkey handle facility access and visitor authorisation in Irish data centres?

Yes. Reboot Monkey manages facility access authorisation on your behalf. You will need to add the engineer to your authorised visitor list with the facility, which Reboot Monkey will coordinate with you. For first-time access to some Dublin facilities, this can take one to two business days. The team advises on the exact procedure for your specific facility during the scope call.

What power standards should I expect for rack and stack work in Ireland?

Irish data centres run on 230V AC at 50Hz. Most standard 1U and 2U servers use IEC C13 and C14 connectors. Higher-draw equipment such as GPU servers and dense storage arrays typically requires C19 and C20 connectors. High-density deployments above 10kW per cabinet may use three-phase IEC 60309 circuits. Reboot Monkey engineers confirm power allocation and connector requirements before the engagement.

How quickly can Reboot Monkey schedule rack and stack work in Dublin?

Standard engagements for up to a full rack are typically scheduled within 3 to 5 business days of scope confirmation, subject to facility access approval. For urgent deployments, same-day and next-day options are available at a surcharge, subject to engineer availability. Larger multi-rack projects are scoped and scheduled individually with a detailed timeline agreed upfront.

Can Reboot Monkey also cover Cork data centres, not just Dublin?

Yes. Reboot Monkey can dispatch engineers to Cork as well as Dublin. Cork is approximately 220 kilometres south of Dublin and is the main secondary market in Ireland for colocation, particularly for disaster recovery and backup infrastructure. Lead times for Cork may be slightly longer than for Dublin given engineer positioning. Contact the team to confirm availability and scheduling for Cork sites.

What is included in the completion report after a rack and stack job?

The completion report includes a photographic record of the finished rack from the front and rear, a cabling diagram or description of all connections made, confirmation of power circuit assignment at the PDU level, asset serial numbers and rack unit positions for each device, and any notes on deviations from the original layout diagram. The report is delivered on the same day the work is completed.

Does Reboot Monkey provide rack and stack for high-density GPU or AI server deployments?

Yes. High-density deployments including GPU servers for AI and machine learning workloads are handled as part of the rack and stack scope. These builds require careful power planning, heavier cable management for high-airflow chassis, and in some cases coordination with the facility on power circuit upgrades. Reboot Monkey agrees the power and cabling requirements in detail during the scope call before the work begins.

Is rack and stack in Ireland GDPR-compliant if my data is stored on the hardware being installed?

Rack and stack is a physical installation service. Reboot Monkey engineers handle the hardware and cabling but do not access the data stored on your servers. Ireland is subject to GDPR and the Irish Data Protection Commission serves as the EU lead supervisory authority for many major technology companies. Deploying hardware in an Irish colocation facility keeps your data within EU jurisdiction. The installation work itself does not constitute a transfer or processing of personal data.