Skip to content
Downtown Phoenix high-rises in the middle of the low city grid, backed by layered desert mountain ranges, seen from South Mountain

Photo: Alan Stark from Goodyear, AZ, United States · CC BY-SA 2.0 · source

Rack and Stack · United States

Rack and Stack in Phoenix

Rack and stack in Phoenix means installing, mounting and cabling new hardware in a data centre that another company owns and runs. Reboot Monkey engineers carry out the work in your rack, covering cabling, labelling and power-on checks, and quotes are given on request.

In Phoenix

Phoenix

  • 5

    services detailed for Phoenix

  • 1

    agreement for every city

Plan your Phoenix installation

Tell us what hardware is arriving and where it is going. Reboot Monkey will scope the job and send a quote.

In depth

Phoenix: 8 sections, open any to read more.

Rack and Stack in Phoenix

New servers, switches and storage arrive on pallets and need to become working equipment in a rack. Rack and stack is that step: installing, mounting and cabling new hardware so it is ready for your own configuration team. PhoenixNAP stands on E. University Dr in Phoenix. Reboot Monkey is a third-party datacenter services operator, not a hosting company and not a datacenter owner, so the work is done inside the facility where your equipment already lives or will live. Your hardware, your choice of vendor and your rack stay as they are; Reboot Monkey supplies the hands and the process that put the equipment in place. For a CTO or IT Director, the practical question is who is on the floor and what they are accountable for. A Reboot Monkey engineer is dispatched to the customer's facility to carry out the agreed job.

Datacenter Facilities in Phoenix

Data centres in Phoenix, ordered by the number of networks present:

  • PhoenixNAP, 3402 E. University Dr., Phoenix 85034: 72 networks; carriers AT&T US, Arelion and Global Secure Layer
  • Digital Realty PHX10 (120 E Van Buren), 120 East Van Buren Street, Phoenix 85004: 34 networks; carriers AT&T US and Arelion
  • Iron Mountain Data Center - Phoenix (AZP-1) (Iron Mountain Data Centers), 615 N. 48th Street, Phoenix 85008: 32 networks; carriers AT&T US, Arelion and Massive Networks
  • CyrusOne Phoenix (CyrusOne Inc.), 2335 South Ellis Road, Phoenix 85286: 16 networks; carriers AT&T US and Arelion
  • Centersquare Phoenix (PHX1), 615 N. 48th Street, Phoenix 85008: 8 networks
  • QTS Phoenix (PHX1) (QTS Realty Trust, Inc.), 120 E Van Buren St, Phoenix 85004: 8 networks
  • Aligned Phoenix (PHX-01) (Aligned Data Centers), 2500 W Union Hills Drive, Phoenix 85027: 6 networks; carriers AT&T US
  • 1GServers Data Center PHX1 (1GServers, LLC), 3719 E La Salle St, Phoenix 85040: 5 networks
  • Flexential - Phoenix (PHX01) (Flexential Corp.), 1850 W Deer Valley Rd, Phoenix 85027: 4 networks; carriers AT&T US
  • DataBank Phoenix (PHX1) (DataBank, Ltd.), 3110 N Central Ave, Phoenix 85012-2695: 3 networks

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks. That scope is deliberately plain so that a procurement manager can compare it against an internal task list or another quote without translation. The engineer mounts the equipment in the rack, runs and dresses the cabling, labels each cable and device so that later work can be done from the label alone, and performs a power-on check to confirm the hardware starts. Digital Realty PHX10 (120 E Van Buren) stands on East Van Buren Street in Phoenix.

Connectivity belongs to the same job. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack. Where a link needs inspection, a fibre inspection scope and cleaning kit are available on request.

  • Installing and mounting new servers, switches and other hardware in the rack
  • Cabling and patching, including the cross connects and carrier circuits Reboot Monkey orders for the rack
  • Labelling of cables and devices
  • Power-on checks after installation
  • Fibre inspection scope and cleaning kit on request

Why Reboot Monkey

A rack and stack job is only as dependable as the person doing it and the person covering for them. For every customer site, a second, briefed Reboot Monkey engineer is named as backup, so a delivery window does not depend on one individual being available. CyrusOne Phoenix stands on South Ellis Road in Phoenix.

Reboot Monkey is vendor-neutral. It does not sell you a hosting plan or tie the installation to a platform, because it neither hosts your workloads nor owns the building. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them. That lets one supplier cover the physical chain from a pallet at the loading dock to a patched, labelled and powered-on rack, while the customer keeps control of the configuration.

Prices are quoted on request and depend on the customer and the size of the job. A small addition of a few servers and a larger build are scoped separately, so the quote matches the work described.

How Reboot Monkey Works

These terms apply in every facility in Phoenix where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Phoenix

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Rack and Stack in Other Cities in United States

Deployments rarely stay in one city. When a project spans several sites, the same approach to scope, backup engineers and handover can be applied in each location. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For United States rollouts that continue beyond Phoenix, the same service is available in Rack and Stack in Chicago, Rack and Stack in Dallas, Rack and Stack in Denver, Rack and Stack in Los Angeles, Rack and Stack in New York and Rack and Stack in Ashburn.

Related Services

New hardware that has been racked usually needs somewhere to run, and that is a separate service from the installation itself. If you also need space, power and connectivity for the equipment, Colocation in Phoenix covers rack space in the same city, so the installation and the space can be arranged together. Once equipment is in place, other Reboot Monkey services follow the same hardware through its life: remote hands for physical tasks on your instruction, smart hands for technical work that needs diagnostic judgement, server migration between racks, rooms or facilities, and hardware monitoring by the Reboot Monkey NOC. Retired equipment is handled through data center decommissioning and IT asset disposition.

Frequently Asked Questions

What does rack and stack cover in Phoenix?

Rack and stack in Phoenix means installing, mounting and cabling new hardware in the customer's rack. The work covers cabling, labelling and power-on checks, performed by Reboot Monkey engineers under the facility operator's site rules. Reboot Monkey also orders the cross connects and carrier circuits for the rack. Quotes are given on request.

Do you work in every datacenter in Phoenix?

Reboot Monkey engineers work in any facility in Phoenix where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Phoenix?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Phoenix?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your Phoenix installation

Tell us what hardware is arriving and where it is going. Reboot Monkey will scope the job and send a quote.

Get a quote