Skip to content

Republic of the Congo · Brazzaville

Remote Hands in Brazzaville

Remote hands in Brazzaville means a Reboot Monkey engineer carries out physical tasks in your rack on your instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey provides on-site IT support in Brazzaville data centers, inside buildings that other companies own and run.

Remote Hands

  • 8

    services detailed for Brazzaville

  • 1

    agreement for every city

Request remote hands in Brazzaville

Send the task and the equipment it concerns, and Reboot Monkey will quote the job.

In depth

Remote Hands: 6 sections, open any to read more.

Remote Hands in Brazzaville

Siège de l'ARPCE stands on Immeuble ARPCE in Brazzaville. For a business running equipment in the Republic of the Congo, the practical question is who can touch the hardware when something needs a physical hand and your own staff are not in the room. Reboot Monkey is a third-party datacenter services operator. It does not host servers and it does not own the buildings it works in. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. Remote hands is the physical layer of that work. You tell the engineer what to do, and the engineer does it and reports back. The task list is deliberately narrow: reboots, cable checks, component swaps and visual checks. Work that needs diagnostic judgement or configuration knowledge belongs to smart hands, which is a separate service. Keeping the two apart tells you in advance what you are asking for, and it keeps a simple instruction from turning into an open-ended engagement. Whoever operates the building sets the rules for entering it, and Reboot Monkey engineers work within them.

Datacenter Facilities in Brazzaville

Data centres in Brazzaville, ordered by the number of networks present:

  • MTN Congo Datacenter, P7HQ+GCH, Brazzaville, Congo - Brazzaville: 1 network
  • Siège de l'ARPCE, Immeuble ARPCE, 91 Bis Avenue de l'Amitié, 2490 Brazzaville

Our Remote Hands Services

A remote hands request in Brazzaville follows a plain sequence. You send the instruction describing the task and the equipment it concerns. A Reboot Monkey engineer is dispatched to the facility, carries out the task in your rack, and confirms back to you what was done. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a single absence does not leave your site without a briefed person.

The tasks fall into four groups:

  • Reboots: a power cycle or restart of a server or network device that has stopped responding, carried out on your instruction.
  • Cable checks: confirming that a patch lead is seated, labelled and connected to the port you expect.
  • Component swaps: replacing a part such as a failed drive or module that you have supplied or specified.
  • Visual checks: reading status lights, display panels and port states and reporting what the engineer sees.

Why Reboot Monkey

Reboot Monkey sells the network for the rack as well as the hands that work on it. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in your rack. A cable check or a re-patch is therefore handled by the same company that ordered the circuit, so you deal with one party for both the connection and the physical work on it. When a link needs attention, a fibre inspection scope and cleaning kit are available on request. That matters when a connector, rather than the equipment at either end, is the likely cause of a fault, since a visual inspection can show a dirty or damaged end face before anyone replaces a working part. The same engineering group also covers the services that sit next to remote hands: smart hands for work that needs diagnostic judgement, rack and stack for new hardware, server migration between racks, rooms or facilities, and hardware monitoring by the Reboot Monkey NOC. Prices are quoted on request and depend on the customer and the size of the job, so the quote you receive reflects your own site and the work you need done.

How Reboot Monkey Works

These terms apply in every facility in Brazzaville where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Brazzaville?

Remote hands covers physical tasks carried out on your instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer performs them in your rack inside the facility. Work that needs diagnostic judgement and configuration knowledge is smart hands, a separate service. Installing new hardware is rack and stack, and moving equipment is server migration.

Do you provide on-site IT support in Brazzaville data centers?

Yes. A Reboot Monkey engineer is dispatched to the facility and works in your rack on the task you have given. Engineers work under the site rules of the operator, who owns and runs the building. A second, briefed engineer is named as backup for every customer site, and prices are quoted on request.

Do you work in every datacenter in Brazzaville?

Reboot Monkey engineers work in any facility in Brazzaville where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Brazzaville?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with remote hands in Brazzaville?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request remote hands in Brazzaville

Send the task and the equipment it concerns, and Reboot Monkey will quote the job.

Published:

Get a quote