Skip to content

Rwanda · Kigali

Rack and Stack in Kigali

Rack and stack in Kigali means installing, mounting and cabling new hardware in a customer's rack inside a third-party data centre. Reboot Monkey engineers carry out the cabling, labelling and power-on checks, and quotes are on request.

Rack and Stack

  • 8

    services detailed for Kigali

  • 1

    agreement for every city

Plan your Kigali installation

Tell us the equipment, the rack and the connections you need, and Reboot Monkey will quote the job.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Kigali

Telecom House Kigali stands on Boulevard de L'Umuganda in Kigali. A company that brings new servers, switches or storage into the city needs the hardware unpacked, mounted in the rack, cabled and confirmed working before any workload moves onto it. That physical stage is rack and stack: installing, mounting and cabling new hardware. Reboot Monkey is a third-party datacenter services operator. It does not own or run the building. For a buyer, this means the installation is planned around the access procedure of the facility the equipment is going into, and the engineer on site follows that procedure from arrival to departure. The work starts from the customer's instruction. You tell us which equipment is arriving, which rack it belongs in and how it should be connected. The engineer then carries out the physical installation, and you receive the finished rack in the state you specified, ready for your own team to configure remotely. Where a job also needs the configuration knowledge that goes beyond physical installation, that is a separate service, smart hands, which covers technical work that needs diagnostic judgement.

Datacenter Facilities in Kigali

Data centres in Kigali, ordered by the number of networks present:

  • Telecom House Kigali, Boulevard de L'Umuganda, P.O. Box 7229, Kigali: 11 networks
  • RURA (Rwanda Utilities Regulatory Authority), KN 39 St, Kigali: 3 networks
  • AOS Ltd, KBC Building, 3rd Floor Block D. KN 5 RD, 7411, Kigali
  • MTN Centre Kigali (MTN Rwandacell), MTN Centre Kigali
  • TrAC CDC - B.Secure (TransAfrica Communications Ltd), KG 7 Avenue, #8, Telecom House, Kigali

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks. Each part has a purpose for the buyer.

Cabling is the installation and patching of the cables that connect your equipment inside your rack. Reboot Monkey also sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Network connectivity and the physical installation are therefore handled together, so the circuit you ordered and the port it lands on are matched by the same party.

Labelling gives every cable and device an identifiable mark, so that a later change, a fault investigation or a remote hands request can be carried out without guesswork. Power-on checks confirm that the installed hardware starts and is ready to hand over.

Where fibre links are part of the job, a fibre inspection scope and cleaning kit are available on request. Quotes are on request, and the price depends on the customer and the size of the job. The scope of a rack and stack job in Kigali is set at the quoting stage, so you know what the engineer will do before the visit is booked.

  • Installing and mounting new servers, switches and other hardware in the rack
  • Cabling and patching inside the customer's rack, including circuits ordered through Reboot Monkey
  • Labelling of cables and devices
  • Power-on checks before handover
  • Fibre inspection scope and cleaning kit on request

Why Reboot Monkey

Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and not a datacenter owner. For a CTO, IT Director or procurement manager this means one supplier can cover both the connectivity and the hands-on installation for equipment placed in someone else's facility.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the first engineer cannot attend, the person who takes the job already knows the site and the request, so the installation is not held up while a replacement is briefed from nothing.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That is the scale of the field operation behind a single rack and stack request, and it is the reason a customer with equipment in several places can raise installation work through one supplier rather than arranging separate local contractors for each.

To follow a rack and stack job with other physical work later, such as moving equipment between racks or retiring old hardware, the related services are server migration and data center decommissioning, and both are run by the same operator.

How Reboot Monkey Works

These terms apply in every facility in Kigali where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Kigali?

Rack and stack covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks, carried out by Reboot Monkey engineers under the facility operator's site rules. Quotes are on request, and the price depends on the customer and the size of the job.

Do you work in every datacenter in Kigali?

Reboot Monkey engineers work in any facility in Kigali where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Kigali?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Kigali?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your Kigali installation

Tell us the equipment, the rack and the connections you need, and Reboot Monkey will quote the job.

Published:

Get a quote