Skip to content

Saudi Arabia · Riyadh

Rack and Stack in Riyadh

Rack and stack in Riyadh means installing, mounting and cabling new hardware in a rack inside a data centre that another company owns and runs. Reboot Monkey engineers carry out the work on site, including cabling, labelling and power-on checks, and a second briefed engineer is named as backup for the customer site.

Rack and Stack

  • 8

    services detailed for Riyadh

  • 1

    agreement for every city

Plan your rack and stack in Riyadh

Send the hardware list, the destination rack and your target date. Reboot Monkey scopes the work and returns a quote.

In depth

Rack and Stack: 7 sections, open any to read more.

Rack and Stack in Riyadh

KACST Building 44 stands on King Abdullah Branch Rd in Riyadh. A rack and stack job here starts with new hardware arriving at a facility that someone else owns and operates. That arrangement shapes how the job is planned, because delivery, access and the install itself all happen inside the operator's framework. Reboot Monkey is a third-party datacenter services operator. It does not own the data centre and it is not a hosting company. What it provides is the physical work of getting equipment into a rack and ready to run, together with the rack space, IP transit, leased IP addresses and network that the equipment depends on. Reboot Monkey engineers are dispatched to the customer's facility to carry out the installation, so the buyer deals with one party for the physical side of the job.

Datacenter Facilities in Riyadh

Data centres in Riyadh, ordered by the number of networks present:

  • KACST Building 44 (King Abdul Aziz City for Science and Technology), King Abdullah Branch Rd, Al Raed, 12354 Riyadh: 8 networks
  • center3 RUH4 - Riyadh: 8 networks
  • center3 RUH1 - Riyadh: 6 networks
  • center3 RUH3 - Riyadh: 3 networks
  • Nournet Nahdah Data Centre (Nour Internet Company for Communications and Information Technology Ltd.), Ibn Alhaitham St., 13222 Riyadh: 2 networks
  • center3 RUH2 - Riyadh: 2 networks
  • center3 RUH5 - Riyadh: 1 network
  • center3 RUH6 - Riyadh

Our Rack and Stack Services

Rack and stack is the installation, mounting and cabling of new hardware. In scope for every job is the work that makes the equipment identifiable and safe to hand over: cabling, labelling and power-on checks. Quotes for rack and stack are on request, and prices depend on the customer and the size of the job, so a single server and a multi-rack deployment are each scoped on their own terms.

The sequence of a typical request is straightforward. You describe the hardware, the destination rack and the target date. Reboot Monkey scopes the work against those details and returns a quote. On the day, an engineer mounts the hardware, runs and labels the cabling, and performs the power-on checks. Labelled cabling is what lets a later engineer, whether from Reboot Monkey or elsewhere, trace a connection without guessing.

Connectivity belongs to the same job. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack. A fibre inspection scope and cleaning kit are available on request for jobs where fibre connections need to be checked before service is handed over.

  • Mounting new servers and network equipment in the customer's rack
  • Cabling and labelling of power and network connections
  • Power-on checks once the hardware is installed
  • Cross connects and carrier circuits ordered through the facility operator and carriers present in the facility
  • Fibre inspection scope and cleaning kit on request

Why Reboot Monkey

Reboot Monkey is vendor-neutral and works as the single point of contact for the physical side of a deployment. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, which matters when a Riyadh install is one step in a wider rollout and the same method needs to apply at every site.

For each customer site, a second, briefed Reboot Monkey engineer is named as backup. If the first engineer is unavailable, the work is not left without someone who already knows the site and the job.

The buyer also gets a clear boundary of responsibility. The operator runs the building, and Reboot Monkey runs the installation inside the customer's rack. Because the facility's access policy and site rules come from the operator, they are confirmed with that operator at the planning stage, not discovered on the day of the install. For a CTO or IT director, that means a defined scope, a named backup and a quote that reflects the actual size of the job.

How Reboot Monkey Works

These terms apply in every facility in Riyadh where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Related Services

A rack and stack job often sits next to other work on the same site. If hardware is being replaced, you may need to plan for the removal of the old equipment through [Data Center Decommissioning in Riyadh](/en/saudi-arabia/riyadh/data-center-decommissioning/), or move existing equipment between racks, rooms or facilities with [Data Center Migration in Riyadh](/en/saudi-arabia/riyadh/data-center-migration/) or [Server Migration in Riyadh](/en/saudi-arabia/riyadh/server-migration/).

Once the hardware is running, day-to-day physical tasks such as reboots, cable checks and visual checks are covered by [Remote Hands in Riyadh](/en/saudi-arabia/riyadh/remote-hands/). Work that needs diagnostic judgement and configuration knowledge falls under [Smart Hands in Riyadh](/en/saudi-arabia/riyadh/smart-hands/). Planning these together with the install keeps one engineering relationship across the life of the hardware.

Frequently Asked Questions

What does rack and stack cover in Riyadh?

Rack and stack covers installing, mounting and cabling new hardware in the customer's rack, and the work includes cabling, labelling and power-on checks. Reboot Monkey engineers carry it out inside a facility that another company owns and runs, under the operator's site rules. Quotes are on request and depend on the customer and the size of the job.

Do you work in every datacenter in Riyadh?

Reboot Monkey engineers work in any facility in Riyadh where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Riyadh?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Riyadh?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your rack and stack in Riyadh

Send the hardware list, the destination rack and your target date. Reboot Monkey scopes the work and returns a quote.

Published:

Get a quote