Serbia · Belgrade
Rack and Stack in Belgrade
Rack and stack in Belgrade means installing, mounting and cabling new hardware in your rack. Reboot Monkey engineers carry out the cabling, labelling and power-on checks inside the facility, and the facility operator runs the building around them.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Belgrade
1
agreement for every city
Request a rack and stack quote for Belgrade
Send the hardware list and rack details. Quotes are on request and depend on the customer and the size of the job.
In depth
Rack and Stack: 6 sections, open any to read more.
Rack and Stack in Belgrade
New servers, switches and storage arrive at a data center as boxes, and the work between delivery and a working rack is where schedules slip. Rack and stack is that work: installing, mounting and cabling new hardware so it is ready for your own team to configure. Cetin Data Center stands on Omladinskih brigada in Belgrade. Reboot Monkey is a third-party datacenter services operator. It does not own or run data centers, and it is not a hosting company. It sells rack space, IP transit, leased IP addresses, network connectivity and data-centre hardware, together with the services that deliver, install and support them, inside facilities that other companies own and run. For a buyer in Belgrade, this means one party can supply the hardware and the physical labour to bring it into service, or install equipment you have already purchased. Because of this, access arrangements for a job are agreed before an engineer is dispatched, not improvised on the day. Reboot Monkey's field engineers work in 190 countries and more than 400 locations as of 2026, and that field model is what a Belgrade job runs on: engineers are dispatched to your rack in the facility where your equipment is housed.
Datacenter Facilities in Belgrade
Data centres in Belgrade, ordered by the number of networks present:
- Cetin Data Center (CETIN Ltd. Belgrade), 90 Omladinskih brigada, 11070 Belgrade: 26 networks; carriers Arelion, GIBIRNet, Global Network Management, RETN and ZET.NET Backbone
- Telekom Srbija data centar (TSSRB - Telekom Srbija), Katiceva St. 14-18, V floor, 11000 Belgrade: 9 networks; carriers Arelion
- BeotelNet Data Center (BeotelNet-ISP d.o.o), 37 Bulevar vojvode Mišića, 11040 Belgrade: 5 networks
- Serbia BroadBand (Serbia BroadBand d.o.o.), Kumodraska 241, 11000 Belgrade: 4 networks
- Orion Telekom Data Center (Drustvo za telekomunikacije Orion telekom doo Beograd), Naselje Zemun Polje Mala Pruga 8, Beograd, 202902 Belgrade: 3 networks
- Absolut Solutions, Nehruova 82a, 11070 Belgrade: 2 networks
- PhoenixNAP BELGRADE, Omladinskih brigada 1, 11070 Belgrade
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks. That scope is stated plainly so you can compare it with what your own team, a hardware reseller or another contractor offers, and so that a quote describes the same job you have in mind. Quotes are on request, and prices depend on the customer and the size of the job.
A typical job runs in a sequence. You send the hardware list, the target rack positions and the cabling plan, and Reboot Monkey confirms the scope against that list. Equipment is then mounted in the rack, cabled to the agreed ports, labelled so that every cable and device can be identified later, and powered on for a check that the hardware comes up. Reboot Monkey can also supply the hardware itself, so delivery to the facility and installation sit under one request rather than two.
Network is part of the same picture. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack. A fibre inspection scope and cleaning kit are available on request, which matters when a new link will not come up and the first suspect is a dirty connector.
Rack and stack is one of several physical services. When a later task needs a different kind of work, the neighbouring services cover it:
- Remote hands: physical tasks on your instruction, such as reboots, cable checks, component swaps and visual checks.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Server migration: moving equipment between racks, rooms or facilities.
- Hardware monitoring: monitoring of your servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey
Installation work depends on who is standing at the rack and who can step in if that person is unavailable. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a job does not stall because one engineer cannot attend. The backup is briefed on the site beforehand, not introduced at the last minute.
The vendor-neutral position matters for a rack and stack buyer. Reboot Monkey installs what you specify, in the rack you specify, and does not tie the work to a single hardware brand or to the operator of the building. The commercial side stays equally direct: prices are quoted on request, shaped by the customer and the size of the job, so the quote reflects your actual scope.
One point to settle early is how the work is documented. Labelling is part of the stated scope, which means the rack you hand to your own administrators is identifiable cable by cable, and a later change by Reboot Monkey, by your staff or by another contractor starts from a readable state. Power-on checks confirm that the equipment starts before the job is closed.
To begin, describe the hardware, the rack and the timing you have in mind, and a quote follows against that scope.
How Reboot Monkey Works
These terms apply in every facility in Belgrade where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Belgrade?
Rack and stack covers installing, mounting and cabling new hardware in your rack. The work includes cabling, labelling and power-on checks, carried out by Reboot Monkey engineers under the facility operator's site rules. Quotes are on request, and prices depend on the customer and the size of the job.
Do you work in every datacenter in Belgrade?
Reboot Monkey engineers work in any facility in Belgrade where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Belgrade?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Belgrade?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Request a rack and stack quote for Belgrade
Send the hardware list and rack details. Quotes are on request and depend on the customer and the size of the job.