
Photo: Josep M. Gracia · CC BY-SA 4.0 · cropped · source
South Africa · Cape Town
Rack and Stack in Cape Town
Reboot Monkey installs, mounts and cables new hardware in Cape Town data centres that other companies own and run. Rack and stack work covers cabling, labelling and power-on checks, and quotes are on request. Engineers work in the customer's facility, so the equipment goes live in the rack it was ordered for.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Cape Town
1
agreement for every city
Plan your Cape Town install
Send the device count, rack positions and connectivity needs, and Reboot Monkey will quote the job.
In depth
Rack and Stack: 7 sections, open any to read more.
Rack and Stack in Cape Town
Teraco CT1 Cape Town, South Africa stands on Great Westerford Building in Cape Town. Hardware that arrives at a Cape Town data centre has to be unpacked, mounted, cabled and brought up before it can serve traffic. Rack and stack is the service that does this: installing, mounting and cabling new hardware in the customer's rack. Reboot Monkey is a third-party datacenter services operator, not a hosting company and not a datacenter owner. The equipment, the rack space and the building all sit with the parties that already own them, and Reboot Monkey supplies the physical work that connects them. For a buyer planning an install, that means the schedule for a job is set together with the operator's access arrangements, and the engineer on site follows them.
Datacenter Facilities in Cape Town
Data centres in Cape Town, ordered by the number of networks present:
- Teraco CT1 Cape Town, South Africa (Teraco Data Environments Pty Ltd), Great Westerford Building, 240 Main Road, Cape Town: 199 networks; carriers DFA South Africa and Orange Wholesale International - EVPL
- Teraco CT2 Cape Town, South Africa (Teraco Data Environments Pty Ltd), Brackengate 2, 57 Tiber Rd, Brackenfell, Cape Town: 25 networks; carriers DFA South Africa
- Africa Data Centres, Cape Town CPT1, South Africa, 108 De Waal Road, Elfindale, Diep River, Cape Town: 20 networks
- OADC CPT3 - Cape Town (Open Access Data Centres), 7th Floor, The Terraces, Cape Town: 12 networks; carriers DFA South Africa
- OADC CPT1 - Cape Town (Open Access Data Centres), Burg House, Belmont Road, Rondebosch, Cape Town: 11 networks
- OADC CPT2 - Brackenfell (Open Access Data Centres), Viro Crescent, Stikland Industrial, Cape Town: 1 network
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks. Each of the three parts has a purpose that matters once the hardware is in service.
Cabling means the engineer mounts the equipment and installs and patches the cabling in the customer's rack. Labelling means each cable and device is marked, so that anyone who later services the rack can trace a link without guessing. Power-on checks mean the hardware is brought up and confirmed to start before the engineer leaves the rack, so a fault is found during the install and not at the first remote login.
Network is part of the same job when it is needed. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A buyer can therefore place one request for the equipment and its connectivity instead of coordinating the operator, the carrier and an installer separately.
Where a link needs inspection, a fibre inspection scope and cleaning kit are available on request. Quotes for rack and stack are given on request, and prices depend on the customer and the size of the job, so a request should state the number of devices, the rack positions and the connectivity to be patched.
- Mounting and cabling of new hardware in the customer's rack
- Labelling of cables and devices
- Power-on checks before the job is closed
- Cross connects and carrier circuits ordered through the operator and the carriers in the facility
- Fibre inspection scope and cleaning kit on request
Why Reboot Monkey
A rack and stack job is a single visit with a fixed purpose, and the useful questions for a buyer are who turns up and who covers the gap if that person cannot. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so an install does not stall on one person's availability. Reboot Monkey does not own the data centre it works in. The same engineers can continue with the work that follows an install. Remote hands covers physical tasks on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. Hardware monitoring, done by the Reboot Monkey NOC, watches the customer's servers and network equipment once they are racked. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, so a company that racks hardware in Cape Town and in other regions can use the same operator for each.
How Reboot Monkey Works
These terms apply in every facility in Cape Town where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Related Services
Rack and stack is the first step in the life of a piece of hardware, and a Cape Town deployment often has a counterpart at the other end. When older equipment is replaced, the retired servers have to be removed and disposed of, and a buyer clearing out a rack for the new install can arrange that through [Data Center Decommissioning in Cape Town](/en/south-africa/cape-town/data-center-decommissioning/). Server migration, which moves equipment between racks, rooms or facilities, covers the cases where hardware is relocated instead of replaced.
Frequently Asked Questions
What does rack and stack cover in Cape Town?
Rack and stack in Cape Town means installing, mounting and cabling new hardware in the customer's rack inside a data centre. The work covers cabling, labelling and power-on checks. Reboot Monkey engineers work under the facility operator's site rules, and quotes are given on request, depending on the customer and the size of the job.
Do you work in every datacenter in Cape Town?
Reboot Monkey engineers work in any facility in Cape Town where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Cape Town?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Cape Town?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your Cape Town install
Send the device count, rack positions and connectivity needs, and Reboot Monkey will quote the job.