
Photo: © Matt Joseph / https://mattj.io · CC BY-SA 4.0 · source
Spain · Madrid
Rack and Stack in Madrid
Rack and stack in Madrid means installing, mounting and cabling new hardware in a data centre that another company owns and runs. Reboot Monkey engineers carry out the work in your rack, cover cabling, labelling and power-on checks, and quote on request.
In Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
Rack and Stack
8
services detailed for Madrid
1
agreement for every city
Plan your Madrid installation
Describe the hardware, the rack and the connectivity it needs, and Reboot Monkey will quote the job.
In depth
Rack and Stack: 7 sections, open any to read more.
Rack and Stack in Madrid
Digital Realty Madrid MAD1-2 stands on C/ Albasanz in Madrid. Whichever building your hardware lands in, the job is the same: new servers, switches and storage arrive, and they have to be mounted, cabled and brought up without loose ends. Reboot Monkey installs, mounts and cables new hardware in the customer's rack, so the equipment you ordered is ready for your own team to configure. Reboot Monkey is a third-party datacenter services operator, not a hosting company and not a datacenter owner. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, and the services that deliver, install and support them, so rack and stack can be ordered alongside the capacity it is meant to serve. The request starts with a short description of the hardware, the target rack and the connectivity it needs. From that, Reboot Monkey quotes the job on request. Prices depend on the customer and the size of the job, and no figure is fixed in advance of that description.
Datacenter Facilities in Madrid
Data centres in Madrid, ordered by the number of networks present:
- Digital Realty Madrid MAD1-2, C/ Albasanz 71, 28037 Madrid: 231 networks; carriers AXENT, Arelion, Core-Backbone, EXA Infrastructure, EllaLink and others
- Digital Realty Madrid MAD3, Calle de Emilio Muñoz 49-51, 28037 Madrid: 49 networks; carriers AXENT, Core-Backbone, EXA Infrastructure, Inter.link, RETN and others
- Espanix Datacenter (Asociación ESpanix), Mesena 80, 28033 Madrid: 45 networks; carriers AXENT, EXA Infrastructure, RETN and euNetworks
- Digital Realty Madrid MAD4, Calle de Alfonso Gómez 4, 28037 Madrid: 25 networks; carriers Core-Backbone, Inter.link, RETN and ZET.NET Backbone
- IaaS Datacenter Madrid, Maraton 12, 28037 Madrid: 20 networks; carriers RETN and euNetworks
- Global Switch Madrid, Calle Yecora, 4, 28022 Madrid: 19 networks; carriers EXA Infrastructure and euNetworks
- IPCore Datacenter Madrid (IPCore Datacenter SL), Calle Marzo 16, 28022 Madrid: 16 networks
- Equinix MD1 - Madrid (Equinix, Inc.), Calle Isabel Colbrand 6-8, 28050 Madrid: 14 networks; carriers AXENT, EXA Infrastructure, Global Secure Layer, ZET.NET Backbone and euNetworks
- nLighten Madrid MAD1 (nLighten HQ BV), c/ Lezama, 4, 28034 Madrid: 12 networks; carriers EXA Infrastructure
- Cogent Madrid (Cogent Communications, Inc.), Subestacion Electrica de REE, PD Majuelos Nuevos, San Sebastian de los Reyes, 28700 Madrid: 11 networks
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks. In practice a job in Madrid follows a sequence the buyer can check at each step.
- Mounting: new servers, switches and other equipment are installed in the agreed rack positions.
- Cabling: Reboot Monkey engineers install and patch the cabling in the customer's rack, following the layout agreed beforehand.
- Labelling: cables and equipment are labelled so that later remote hands, smart hands or migration work can identify every connection.
- Power-on checks: once the equipment is mounted and cabled, it is powered on and checked before the job is closed.
- Fibre inspection: a fibre inspection scope and cleaning kit are available on request for jobs that involve fibre links.
Why Reboot Monkey
Reboot Monkey sells the network for the rack as well as the installation. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack. One supplier therefore handles the circuit order and the physical connection, rather than the customer coordinating several parties around a single delivery date.
A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a job does not depend on one person being available. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, which means a multi-site rollout can be handled under one supplier instead of being split between local contractors.
After the installation, the same engineers can take on later work at the site. Remote hands covers physical tasks on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. Hardware monitoring by the Reboot Monkey NOC watches your servers and network equipment once they are in service.
How Reboot Monkey Works
These terms apply in every facility in Madrid where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Related Services
Most rack and stack jobs follow a decision about where the equipment will live. If you are still choosing space, power and connectivity for the hardware, review [Colocation in Madrid](/en/spain/madrid/colocation/) first, so the rack positions and circuits are settled before the equipment arrives.
When the hardware you are installing replaces older equipment, rack and stack often pairs with server migration, which moves equipment between racks, rooms or facilities, and with data center decommissioning, which removes and disposes of retired hardware. Planning the new installation and the removal of the old kit together keeps the rack plan consistent from start to finish.
Frequently Asked Questions
What does rack and stack cover in Madrid?
Rack and stack in Madrid covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks. Reboot Monkey engineers carry it out under the facility operator's site rules, and a second briefed engineer is named as backup for the customer site. Quotes are on request and depend on the customer and the size of the job.
Do you work in every datacenter in Madrid?
Reboot Monkey engineers work in any facility in Madrid where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Madrid?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Madrid?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your Madrid installation
Describe the hardware, the rack and the connectivity it needs, and Reboot Monkey will quote the job.