Togo · Lome
Rack and Stack in Lome
Rack and stack in Lome is the installation, mounting and cabling of new hardware inside a data centre that another company owns and runs. Reboot Monkey engineers are dispatched to the customer's facility to rack the equipment, cable it, label it and run power-on checks.
In Rack and Stack
- Rack and Stack
- Colocationon request
- Remote Handson request
- Smart Handson request
- Data Center Migrationon request
- Server Migrationon request
- Data Center Decommissioningon request
- ITADon request
Rack and Stack
2
services detailed for Lome
1
agreement for every city
Plan your hardware installation in Lome
Describe the hardware, the rack and the connectivity you need, and Reboot Monkey will scope the work and quote it on request.
In depth
Rack and Stack: 6 sections, open any to read more.
Rack and Stack in Lome
Lomé Data Centre LOM1 stands on Place de la Réconciliation in Lome. Hardware that arrives at a building like this still has to be unpacked, mounted, cabled and brought up before it can carry a workload, and that physical installation is the work covered here. Rack and stack means installing, mounting and cabling new hardware. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. For a buyer in Lome this means one supplier can cover the space, the connectivity and the hands that fit the equipment. A request starts with a description of the hardware and where it is to go. Reboot Monkey scopes the job, then dispatches an engineer to the customer's facility to carry out the installation. The work covers cabling, labelling and power-on checks. When the job also needs network, Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack.
Datacenter Facilities in Lome
Data centres in Lome, ordered by the number of networks present:
- Lomé Data Centre LOM1 (Société d'Infrastructures Numériques (SIN)), Place de la Réconciliation, Quartier Atchanté 02 BP 20 279 - Lomé, Togo, 0000 Lome: 4 networks
Our Rack and Stack Services
Rack and stack work in Lome covers the physical steps between delivery and a powered-on system. Each request is scoped to the hardware the customer describes. The engineer mounts the equipment in the rack, cables it, labels it and runs the checks that confirm it powers on. Rack and stack often sits beside other work, and Reboot Monkey delivers that work under the same service model. Remote hands are physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. Server migration moves equipment between racks, rooms or facilities. Data center decommissioning removes and disposes of retired hardware, so old equipment can be retired alongside the installation of its replacement. Hardware monitoring is monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. A rack and stack request covers the following steps:
- Installing and mounting new servers and network equipment in the customer's rack
- Cabling and labelling of the installed hardware
- Power-on checks once the hardware is racked and cabled
- Cross connects and carrier circuits ordered from the facility operator and the carriers present, with patching in the customer's rack
- A fibre inspection scope and cleaning kit, available on request
Why Reboot Monkey
Reboot Monkey is a vendor-neutral operator that handles the whole delivery chain for equipment placed in a third-party building. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. In Lome the work takes place in the customer's facility. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A second, briefed Reboot Monkey engineer is named as backup for every customer site. Rack space, IP transit, leased IP addresses, network and hardware are sold by the same operator that installs them, so the physical work and the orders it depends on are handled by one supplier rather than split between several. That matters to procurement managers who need the installation, the circuit orders and the hardware lined up for one delivery date. Prices are quoted on request and depend on the customer and the size of the job. To request a quote, describe the hardware, the rack it is going into and the connectivity it needs, and Reboot Monkey will scope the work from that.
How Reboot Monkey Works
These terms apply in every facility in Lome where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Lome?
Rack and stack in Lome covers installing, mounting and cabling new hardware, including cabling, labelling and power-on checks. Where the job needs network, Reboot Monkey orders the cross connects and carrier circuits, and its engineers install and patch the cabling in the customer's rack. Quotes are on request and depend on the customer and the size of the job.
Do you work in every datacenter in Lome?
Reboot Monkey engineers work in any facility in Lome where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Lome?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Lome?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Rack and Stack nearby
Other services in Lome
Plan your hardware installation in Lome
Describe the hardware, the rack and the connectivity you need, and Reboot Monkey will scope the work and quote it on request.