Uganda · Kampala
Rack and Stack in Kampala
Rack and stack in Kampala means installing, mounting and cabling new hardware in a data centre that another company owns and runs. Reboot Monkey engineers carry out the cabling, labelling and power-on checks inside the customer's rack, and quotes are on request.
In Rack and Stack
- Rack and Stack
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- Colocationon request
- ITADon request
Rack and Stack
7
services detailed for Kampala
1
agreement for every city
Plan your rack and stack job in Kampala
Send Reboot Monkey your hardware list and target rack positions, and receive a quote based on the size of the job.
In depth
Rack and Stack: 6 sections, open any to read more.
Rack and Stack in Kampala
Raxio, UG1, Kampala, Uganda stands on Plot in Kampala. A buyer who places new servers, switches or storage in a Kampala facility needs the hardware mounted, cabled and powered on before it can carry any workload, and that physical work is what rack and stack means: installing, mounting and cabling new hardware. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters, so the building, its power, cooling and access policy stay with the facility operator.
The work in Kampala follows the same sequence as it does anywhere Reboot Monkey operates. You send the hardware list and the target rack positions. Reboot Monkey engineers carry out the installation in the customer's rack. When the job is finished, the engineer's cabling, labelling and power-on checks are the record that the equipment is physically in place and ready for your own team or your own provisioning tools to take over. Prices are quoted on request and depend on the customer and the size of the job.
Datacenter Facilities in Kampala
Data centres in Kampala, ordered by the number of networks present:
- Raxio, UG1, Kampala, Uganda (RAXIO DATA CENTRES), Plot 781, Block 113, Namanve Industrial Park, Kampala: 14 networks
- Communications House (Uganda Internet Exchange Point), Communications House, Plot 1, Colville Street, 00000 Kampala: 4 networks
Our Rack and Stack Services
Rack and stack work covers cabling, labelling and power-on checks; quotes are on request. In practice that means the following steps on a Kampala job, each carried out by Reboot Monkey engineers inside the customer's rack.
- Mounting servers, switches and other equipment in the rack positions you specify.
- Cabling the equipment and labelling each cable so your own team can trace it later.
- Power-on checks once the equipment is mounted and cabled, so you know it starts.
- Installing and patching the network cabling in your rack. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack.
- A fibre inspection scope and cleaning kit, available on request, for jobs where fibre connections need to be inspected or cleaned.
Why Reboot Monkey
Reboot Monkey works as a vendor-neutral operator inside other companies' facilities, so one engagement can cover rack space, connectivity and the physical installation of the hardware that goes into it. Continuity is built into every customer site: a second, briefed Reboot Monkey engineer is named as backup. If the engineer first assigned to your Kampala job is unavailable, the backup already knows the site and the job, so the work does not stop to wait for a new person to be briefed. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Rack and stack is one of several services Reboot Monkey runs alongside remote hands, smart hands, server migration, data center decommissioning, IT asset disposition and hardware monitoring, so the same operator can support the hardware after the first installation. Remote hands covers physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. If you later move equipment between racks, rooms or facilities, that is server migration, and removing retired hardware is data center decommissioning. To start a Kampala rack and stack job, send the hardware list, the target rack positions and your preferred dates, and ask for a quote.
How Reboot Monkey Works
These terms apply in every facility in Kampala where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Kampala?
Rack and stack in Kampala covers installing, mounting and cabling new hardware in the customer's rack, together with cabling, labelling and power-on checks. Reboot Monkey engineers carry out the work under the facility operator's site rules. A second, briefed engineer is named as backup for every customer site. Quotes are on request.
Do you work in every datacenter in Kampala?
Reboot Monkey engineers work in any facility in Kampala where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Kampala?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with rack and stack in Kampala?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Plan your rack and stack job in Kampala
Send Reboot Monkey your hardware list and target rack positions, and receive a quote based on the size of the job.