Skip to content
Aerial view of Dubai's skyline with the Burj Khalifa and the Sheikh Zayed Road towers rising above low-rise neighbourhoods on a sunny day.

Photo: Tim Reckmann from Hamm, Deutschland · CC BY 2.0 · cropped · source

United Arab Emirates · Dubai

Rack and Stack in Dubai

Rack and stack in Dubai means installing, mounting and cabling new hardware in your rack inside a data centre that another company owns and runs. Reboot Monkey engineers carry out the cabling, labelling and power-on checks, and quotes are given on request for the size of the job.

Rack and Stack

  • 8

    services detailed for Dubai

  • 1

    agreement for every city

Plan your Dubai installation

Send the hardware list and target rack. Reboot Monkey scopes the work and returns a quote.

In depth

Rack and Stack: 8 sections, open any to read more.

Rack and Stack in Dubai

Equinix DX1 - Dubai stands on International Media Production Zone (IMPZ) in Dubai. Reboot Monkey is a third-party datacenter services operator, not a hosting company and not a datacenter owner. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. Rack and stack is the part of that work where equipment arrives and becomes a working installation: new hardware is installed, mounted and cabled in the customer's rack. For a CTO, IT Director or procurement manager, the useful question is who does that physical work in the building, to what scope, and what the customer receives at the end. The sections below answer those points for Dubai.

Datacenter Facilities in Dubai

Data centres in Dubai, ordered by the number of networks present:

  • Equinix DX1 - Dubai (Equinix, Inc.), International Media Production Zone (IMPZ), Building F90, Dubai: 88 networks; carriers Orange Wholesale International - EVPL, datamena and i3D.net
  • datamena DXA - Dubai, Building F102 - Dubai Production City, Dubai - United Arab Emirates: 35 networks; carriers Orange Wholesale International - EVPL, datamena and i3D.net
  • Equinix DX2 - Dubai (Equinix, Inc.), International Media Production Zone (IMPZ), Dubai: 7 networks
  • Equinix DX3 - Dubai (Equinix, Inc.), International Media Production Zone (IMPZ), Dubai: 2 networks
  • Khazna Data Center – Dubai (Khazna Data Centers Limited), 58F9+W8 Dubai, Al Meydan Road: 1 network
  • Khazna Data Center - Dubai Design District (Khazna Data Centers Limited), Dubai Design District

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks. The scope is stated plainly so that a quote can be compared with the work actually needed. Each job starts from the customer's request: the hardware to be installed, the rack it goes into, and how it should be cabled and labelled. Prices are quoted on request and depend on the customer and the size of the job.

A typical request moves through these steps:

  • The customer sends the hardware list, the target rack and the cabling and labelling requirements.
  • Reboot Monkey scopes the job and returns a quote, since prices are quoted on request.
  • The engineer installs, mounts and cables the new hardware, labels the cabling and carries out power-on checks.
  • A second, briefed Reboot Monkey engineer is named as backup for the customer site, so the job does not depend on one person being available.

Why Reboot Monkey

Network is part of most rack installations, and Reboot Monkey treats it as part of the same job. It sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. The customer deals with one party for the circuit order and for the physical patching, rather than coordinating the two separately. Fibre work is supported as well: a fibre inspection scope and cleaning kit are available on request, which matters when a newly patched link needs checking before the hardware goes into service. Rack and stack is one of several services delivered by the same engineers. Remote hands, smart hands, server migration, data center decommissioning, IT asset disposition (ITAD) and hardware monitoring are available alongside it. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

How Reboot Monkey Works

These terms apply in every facility in Dubai where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Rack and Stack in Other Cities in United Arab Emirates

Hardware refreshes and expansions often span more than one site in the same country. A deployment that begins in Dubai may need matching equipment installed elsewhere in the UAE, and the same scope of cabling, labelling and power-on checks applies. For work in the capital, see Rack and Stack in Abu Dhabi at /en/united-arab-emirates/abu-dhabi/rack-and-stack/, where the same request process applies.

Related Services

Rack and stack is usually one step in a longer project. New hardware needs space to go into, and retired hardware needs to come out. If the equipment needs a home first, Colocation in Dubai covers the rack space side of the request. If the installation replaces older systems, Data Center Decommissioning in Dubai covers removing and disposing of retired hardware. If the equipment is moving rather than arriving new, Data Center Migration in Dubai covers moving equipment between racks, rooms or facilities.

Frequently Asked Questions

What does rack and stack cover in Dubai?

Rack and stack in Dubai covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks, carried out by Reboot Monkey engineers under the facility operator's site rules. A second, briefed engineer is named as backup for the customer site, and quotes are given on request.

Do you work in every datacenter in Dubai?

Reboot Monkey engineers work in any facility in Dubai where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Dubai?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Dubai?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your Dubai installation

Send the hardware list and target rack. Reboot Monkey scopes the work and returns a quote.

Published:

Get a quote