Bahamas · Nassau
Remote Hands in Nassau
Remote Hands in Nassau is physical work on the customer's equipment, carried out on the customer's instruction by a Reboot Monkey engineer dispatched to the customer's facility: reboots, cable checks, component swaps and visual checks. Reboot Monkey is a third-party operator and does not own the datacenter.
In Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
- ITADon request
Remote Hands
8
services detailed for Nassau
1
agreement for every city
Request Remote Hands in Nassau
Describe the task and the equipment involved, and Reboot Monkey will respond with a quote.
In depth
Remote Hands: 6 sections, open any to read more.
Remote Hands in Nassau
Remote hands in Nassau means physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer is dispatched to the customer's facility, takes the instruction as written and carries out the task at the equipment. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters, so the work always concerns equipment the customer already has in a building someone else runs.
The scope of a request is set by the instruction. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, a separate service. Installing, mounting and cabling new hardware is rack and stack. A request that names the right service, the equipment concerned and the action wanted gives the engineer a clear task at the rack.
Datacenter Facilities in Nassau
Data centres in Nassau, ordered by the number of networks present:
- Secure Shore Data Center (Bahamas Logistic Center Ltd.), 20 - 22 Munnings Road, Nassau: 2 networks
Our Remote Hands Services
Teams looking for on-site IT support in Nassau data centers usually need one of the services below. Each is defined by the work the engineer performs at the customer's equipment.
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Data center decommissioning: removing and disposing of retired hardware.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey
A request for physical work depends on who carries it out and who covers when that person is unavailable. A second, briefed Reboot Monkey engineer is named as backup for every customer site.
A request moves in a fixed order. The customer states the task and names the equipment concerned. The scope is placed in the right service: remote hands for a physical task on instruction, smart hands where diagnosis and configuration are involved, rack and stack for new hardware, or server migration when equipment moves between racks, rooms or facilities. A Reboot Monkey engineer is then dispatched to the customer's facility and carries out the task at the rack.
Remote hands is one service among several from the same operator. The customer can order the physical work, the network for the rack, the rack space, IP transit and leased IP addresses from Reboot Monkey, and move to decommissioning or ITAD when hardware is retired.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.
To start a request, send the task and the equipment involved through the contact form.
How Reboot Monkey Works
These terms apply in every facility in Nassau where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does remote hands cover in Nassau?
Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer is dispatched to the customer's facility in Nassau to perform them. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing, mounting and cabling new hardware is rack and stack, so the request should say which is needed.
Do you provide on-site IT support in Nassau data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility in Nassau and work on the equipment there: remote hands tasks on instruction, smart hands where diagnosis and configuration are needed, rack and stack for new hardware, and server migration between racks, rooms or facilities. Cabling is installed and patched in the customer's rack, and the request names the task and the equipment involved.
Do you work in every datacenter in Nassau?
Reboot Monkey engineers work in any facility in Nassau where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Nassau?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with remote hands in Nassau?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Remote Hands nearby
Other services in Nassau
Request Remote Hands in Nassau
Describe the task and the equipment involved, and Reboot Monkey will respond with a quote.