Skip to content

French Guiana · Cayenne

Rack and Stack in Cayenne

Rack and stack in Cayenne means installing, mounting and cabling new hardware in the customer's rack. Reboot Monkey engineers carry out cabling, labelling and power-on checks inside the facility, and order the cross connects and carrier circuits from the operator and the carriers present. Quotes are on request.

Rack and Stack

  • 8

    services detailed for Cayenne

  • 1

    agreement for every city

Plan a rack and stack job in Cayenne

Send the hardware list and the target rack, and Reboot Monkey will scope the installation and quote it.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Cayenne

GNU Cayenne Collery stands on ZI Collery in Cayenne. Rack and stack is the work that follows when new hardware reaches a data centre: installing, mounting and cabling it so that it is ready for the customer's own configuration. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters.

For a CTO, an IT director or a procurement manager, the decision usually comes down to who handles the physical install and what that work includes. Reboot Monkey engineers are dispatched to the customer's facility in Cayenne to mount, cable and check the equipment. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Rack and stack sits next to other physical services and is kept distinct from them. Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. Server migration moves equipment between racks, rooms or facilities. Rack and stack is the installation of new hardware.

Datacenter Facilities in Cayenne

Data centres in Cayenne, ordered by the number of networks present:

  • GNU Cayenne Collery (Guyane Numérique), ZI Collery, 97300 Cayenne: 6 networks

Our Rack and Stack Services

Rack and stack work covers cabling, labelling and power-on checks. The scope below applies to each job in Cayenne, and the work is defined by the hardware the customer is installing.

A job starts with the customer describing the hardware to be installed and the rack it is going into. Reboot Monkey scopes the work against the list below and quotes it on request. A Reboot Monkey engineer then attends the customer's facility, and a second, briefed engineer is named as backup for the customer site. On site, the order of work follows the list: mounting, cabling, labelling, then power-on checks.

  • Installing and mounting new servers, switches and other equipment in the customer's rack.
  • Cabling of the installed equipment, with Reboot Monkey engineers installing and patching the cabling in the customer's rack.
  • Labelling of the equipment and the cabling.
  • Power-on checks once the hardware is installed and cabled.
  • Cross connects and carrier circuits, ordered from the facility operator and the carriers present in the facility for customers who buy the network for the rack from Reboot Monkey.
  • A fibre inspection scope and cleaning kit, available on request.

Why Reboot Monkey

Reboot Monkey sells the network for the rack as well as the install. It orders the cross connects and carrier circuits from the facility operator and the carriers present, and its engineers patch the cabling in the customer's rack. Rack space, connectivity and the physical work are therefore arranged with one supplier rather than split across several.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. That engineer is part of the job from the start and is named alongside the first.

Prices are quoted on request and depend on the customer and the size of the job. To start a quote, send the hardware list and the rack it is going into.

Once the hardware is racked, the same supplier can carry on with the work that follows. Remote hands and smart hands cover later physical and technical tasks, and hardware monitoring means the Reboot Monkey NOC monitors the customer's servers and network equipment.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

How Reboot Monkey Works

These terms apply in every facility in Cayenne where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Cayenne?

Rack and stack in Cayenne covers installing, mounting and cabling new hardware, with labelling and power-on checks as part of the work. Reboot Monkey engineers carry it out in the customer's rack. For customers who buy the network for the rack, cross connects and carrier circuits are ordered from the facility operator and the carriers present. Quotes are on request.

Do you work in every datacenter in Cayenne?

Reboot Monkey engineers work in any facility in Cayenne where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Cayenne?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Cayenne?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan a rack and stack job in Cayenne

Send the hardware list and the target rack, and Reboot Monkey will scope the installation and quote it.

Published:

Get a quote