Gabon · Libreville
Remote Hands in Libreville
Remote hands in Libreville means physical tasks carried out on your instruction inside the data center where your equipment sits: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers work in the facility, and on-site IT support in Libreville data centers follows the same request flow described below.
In Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
- ITADon request
Remote Hands
8
services detailed for Libreville
1
agreement for every city
Request remote hands in Libreville
Tell us your rack, the tasks you expect and how often you need an engineer. Prices are quoted on request.
In depth
Remote Hands: 6 sections, open any to read more.
Remote Hands in Libreville
GABIX POP CT-1 stands on Ancienne RTG in Libreville. Equipment placed in a building like this is usually far from the people who run it, and that distance is the reason remote hands exists: a fault at the rack still needs a pair of hands, and your own staff are elsewhere. Reboot Monkey is a third-party datacenter services operator. It does not own or run the data centers where it works, and it is not a hosting company. A request starts with your instruction: what to touch, on which rack, and what you expect to see afterwards. The engineer carries out only that task. If the task turns out to need diagnostic judgement or configuration knowledge, it moves from remote hands to smart hands, which is a separate service with its own definition. Keeping the two apart means you always know whether you are asking for an action on your instruction or for engineering judgement on a problem. Prices are quoted on request and depend on the customer and the size of the job. Reboot Monkey does not publish a fixed rate for this work, so the quote reflects your rack, your task list and how often you expect to call on an engineer.
Datacenter Facilities in Libreville
Data centres in Libreville, ordered by the number of networks present:
- GABIX POP CT-1 (Gabon Internet eXchange (GABIX)), Ancienne RTG, 13831 Libreville: 5 networks
- GABIX POP ACE (Gabon Internet eXchange (GABIX)), Angondje, 13831 Libreville: 4 networks
- Airtel Gabon (Airtel Gabon S.A), Rue Pecqueur, Libreville Business Square, 9259: 1 network
- Datacenter Services Libreville (ST Digital), Zone économique spéciale de Nkok (GSEZ), PK22, 0000 Libreville: 1 network
Our Remote Hands Services
Remote hands covers physical tasks carried out on the customer's instruction. In practice that means the work most often needed between planned maintenance visits:
- Reboots: power-cycling a server or network device that no longer responds to out-of-band management.
- Cable checks: tracing, reseating and confirming patch cabling in your rack, including cabling installed by Reboot Monkey engineers when a cross connect or carrier circuit has been ordered for you.
- Component swaps: replacing a failed drive, module or similar part with a spare you have supplied.
- Visual checks: reading status lights, display panels and labels, and reporting what is seen so you can decide the next step.
Why Reboot Monkey
The practical value of a remote hands arrangement lies in how a request is handled from first contact to finished work. You send the instruction, and an engineer is assigned to your site. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a single person being unavailable does not leave your rack without cover.
When the task involves fibre, a fibre inspection scope and cleaning kit are available on request. That matters because a dirty or damaged connector is a common cause of a link that looks faulty at the switch but is fine in the cable. Ask for the kit when you raise the request and the check can be part of the visit.
Proof of the work matters as much as the work. Each request ends with a report of what was done and what was observed, so your records show the state of the equipment after the visit and not only before it.
Reboot Monkey also sells the services around the rack, which lets you keep one point of contact as needs grow: smart hands, rack and stack, server migration, data center decommissioning, IT asset disposition and hardware monitoring by the Reboot Monkey NOC. A request that begins as a reboot can lead to a new installation or a move between rooms without changing supplier.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. To discuss your Libreville rack, send the details through the contact form and ask for a quote.
How Reboot Monkey Works
These terms apply in every facility in Libreville where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does remote hands cover in Libreville?
Remote hands covers physical tasks carried out on your instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer performs the task in your rack and reports what was done. Work that needs diagnostic judgement or configuration knowledge is smart hands, a separate service. Prices are quoted on request and depend on the customer and the size of the job.
Do you provide on-site IT support in Libreville data centers?
Yes. Reboot Monkey engineers work inside the facility where your equipment sits, under the facility operator's site rules. You send an instruction, an engineer carries it out at your rack, and a second briefed engineer is named as backup for your site. Tasks needing diagnostic judgement are handled as smart hands. Reboot Monkey does not own or run the building.
Do you work in every datacenter in Libreville?
Reboot Monkey engineers work in any facility in Libreville where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Libreville?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with remote hands in Libreville?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Request remote hands in Libreville
Tell us your rack, the tasks you expect and how often you need an engineer. Prices are quoted on request.