Skip to content

Gabon · Libreville

Smart Hands in Libreville

Smart hands is technical work inside a data center that needs diagnostic judgement and configuration knowledge, beyond a simple reboot or cable check. Reboot Monkey dispatches engineers for on-site IT support in Libreville data centers, working on the customer's equipment under the facility operator's site rules.

Smart Hands

  • 8

    services detailed for Libreville

  • 1

    agreement for every city

Scope your Libreville requirement

Send the equipment involved, the work you expect and the timing you need. Prices are quoted on request and depend on the customer and the size of the job.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Libreville

GABIX POP CT-1 stands on Ancienne RTG in Libreville. When equipment you run in a Libreville facility needs hands-on attention, the question is rarely whether someone can reach the rack. It is whether the person who arrives can read a fault, decide what to change and carry it out correctly. That is the difference between smart hands and remote hands. Remote hands covers physical tasks done on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, where the engineer is expected to work out what is wrong rather than only follow a step list. Reboot Monkey is a third-party datacenter services operator. It does not own or run data centers and it is not a hosting company. It sells rack space, IP transit, leased IP addresses, network connectivity and data-centre hardware, together with the services that deliver, install and support them, inside facilities that other companies own and run. For a buyer in Libreville this means one party can handle the equipment, the connectivity and the engineer who works on both, while the building itself stays with its operator. Access arrangements are therefore agreed with the operator, and the request you send us is the starting point for that coordination.

Datacenter Facilities in Libreville

Data centres in Libreville, ordered by the number of networks present:

  • GABIX POP CT-1 (Gabon Internet eXchange (GABIX)), Ancienne RTG, 13831 Libreville: 5 networks
  • GABIX POP ACE (Gabon Internet eXchange (GABIX)), Angondje, 13831 Libreville: 4 networks
  • Airtel Gabon (Airtel Gabon S.A), Rue Pecqueur, Libreville Business Square, 9259: 1 network
  • Datacenter Services Libreville (ST Digital), Zone économique spéciale de Nkok (GSEZ), PK22, 0000 Libreville: 1 network

Our Smart Hands Services

A smart hands request starts with a description of the fault or the change you need. A Reboot Monkey engineer is dispatched to your site in Libreville, carries out the work on your equipment and reports back on what was found and done. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a single absence does not leave your site without a briefed contact.

Smart hands work typically involves tasks where the engineer has to interpret what the hardware or network is doing before acting on it. Examples of the work in scope:

  • Diagnosing a server or network device that is not behaving as expected and applying the configuration change that follows from the diagnosis.
  • Installing, mounting and cabling new hardware in your rack (rack and stack), and moving equipment between racks, rooms or facilities (server migration).
  • Installing and patching the cabling in your rack once cross connects and carrier circuits are ordered. Reboot Monkey orders those from the facility operator and the carriers present in the facility.
  • Fibre inspection and cleaning when a link is suspect: a fibre inspection scope and cleaning kit are available on request.
  • Removing and disposing of retired hardware (data center decommissioning) when equipment reaches end of life.

Why Reboot Monkey

Reboot Monkey works for the customer rather than for any one facility or hardware brand. Because it does not own the data centers it works in, it can serve equipment that sits in whichever facility you have chosen, and the same engineering approach applies when your estate spans more than one location. The same company that places an engineer at your rack can also supply the rack space, IP transit, leased IP addresses and network that the equipment depends on. That removes a hand-off between separate suppliers when a fault could sit in either the hardware or the connection: one engineer can look at both. Monitoring of your servers and network equipment is available through the Reboot Monkey NOC as a separate service, so a fault can be raised and then handed to an engineer for action. Prices are quoted on request and depend on the customer and the size of the job. To scope a smart hands requirement for Libreville, send the equipment involved, the work you expect and the timing you need, and Reboot Monkey will respond with a quote.

How Reboot Monkey Works

These terms apply in every facility in Libreville where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Libreville?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, carried out by a Reboot Monkey engineer at your equipment in Libreville. Related work includes installing, mounting and cabling new hardware, moving equipment between racks, rooms or facilities, and patching cabling once cross connects and carrier circuits have been ordered. Simple physical tasks on your instruction fall under remote hands.

Do you provide on-site IT support in Libreville data centers?

Yes. Reboot Monkey dispatches an engineer to your site in Libreville to work on your equipment, then reports what was found and done. A second, briefed engineer is named as backup for every customer site.

Do you work in every datacenter in Libreville?

Reboot Monkey engineers work in any facility in Libreville where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Libreville?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Libreville?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Scope your Libreville requirement

Send the equipment involved, the work you expect and the timing you need. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote