Skip to content
Map of Germany: data centres as dots, the cities with a Reboot Monkey page highlighted: Frankfurt and Berlin

Map: Natural Earth

ITAD

ITAD in Germany: IT Asset Disposition (ITAD)

ITAD in Germany covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff carry out the work at the customer's site or in a processing facility.

  • 9

    of our services in Germany

In depth

ITAD: 7 sections, open any to read more.

ITAD in Germany: How It Works

IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. For a company in Germany, the work begins when servers, network equipment or storage leave production use and a decision is needed on which items are wiped, which are destroyed and which return to the market.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own data centres. ITAD is the part of that service range that deals with hardware once it is retired, whether the equipment stands in the customer's own premises or in a data centre.

A request moves through four stages:

  • Scoping: the customer lists the hardware to be retired, states where it stands, and names the treatment for each group of storage media.
  • Collection: Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing.
  • Processing: Reboot Monkey staff wipe the data or destroy the storage media, in a processing facility or on the customer's site.
  • Resale or buyback: equipment that can be used again is quoted case by case.

E-waste Rules in Germany

In Germany, electronic waste falls under the Elektro- und Elektronikgerätegesetz (ElektroG) of 2015.

For an IT department, the practical question at the moment hardware is retired is which route each item takes. There are three routes, and Reboot Monkey handles each of them differently.

  • Resale or buyback: equipment that can be used again is quoted case by case. Whether a given server, switch or storage array qualifies depends on the equipment itself, so the quote follows the description of the hardware.
  • End-of-life processing: equipment with no further use is processed as end-of-life hardware by Reboot Monkey staff.
  • Storage media: drives are wiped or destroyed, because their contents have to be dealt with separately from the device that carried them.

Personal Data on Retired Drives in Germany

In Germany, personal data on retired drives falls under the General Data Protection Regulation (Regulation (EU) 2016/679), overseen by the authorities in each of the sixteen German federal states (Länder).

A retired drive is not an empty object. Until its contents are wiped or the medium is destroyed, it still holds whatever the system stored on it, and that can include personal data. Drives sit in servers and storage systems and also in other equipment, so the list of hardware to be retired is also a list of the places where data may remain.

Reboot Monkey offers two treatments for the contents of a drive: data wiping, and physical destruction of the storage medium. On the customer's site, storage media can be destroyed physically by shredding or degaussing. Which treatment applies to which drive is the customer's decision, taken at scoping, and it can differ between groups of drives within the same job.

Because shredding or degaussing can take place on the customer's site, a drive that is to be destroyed does not have to leave the customer's premises first. Drives that are wiped, and equipment that goes to resale or buyback, are collected and transported for processing. The customer decides at scoping which path each group of drives follows, and Reboot Monkey staff carry out the path that was chosen.

The authorities that oversee the regulation are those of the federal states. Questions about the handling of personal data on a retired drive therefore go to the customer's own data protection officer and the relevant authority of the Land. Reboot Monkey's part is the physical handling of the drives under the method the customer has chosen, and it does not give a legal opinion on the data they held.

In practice, three drive paths are scoped:

  • Drive for destruction: it is shredded or degaussed on the customer's site by Reboot Monkey staff.
  • Drive for wiping: it is collected, transported and wiped by Reboot Monkey staff.
  • Drive left inside equipment for resale or buyback: its treatment is set at scoping together with the equipment it belongs to.

How Collection and Destruction Work

Collection. Reboot Monkey collects the retired hardware at the customer's site or data centre. Reboot Monkey engineers are dispatched to the place named in the scope. The scope states the collection point and the hardware at that point, so that what leaves the site is what was described in the request.

Access. When the hardware stands in a data centre, the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The customer names the data centre and the contact who can authorise access when the job is scoped, so that the collection is arranged within those rules.

Transport. The collected hardware is transported for processing. Storage media that are to be destroyed on the customer's site are dealt with there, as described in the scope, and the transport step covers the remaining hardware.

Data wiping. Data wiping is the treatment for drives that are not destroyed. It is carried out by Reboot Monkey staff, and the customer selects it at scoping for the drives concerned.

Destruction. Processing is carried out by Reboot Monkey staff, in a processing facility or on the customer's site. Physical destruction by shredding or degaussing is the option that takes place on the customer's site. Shredding and degaussing are both forms of physical destruction, and the customer names the method for each group of drives when the request is scoped.

Resale and buyback. Resale or buyback is the last step and applies only to equipment that can be used again. It is quoted case by case, after the hardware has been described, and the quote concerns that equipment only. Equipment without further use stays on the end-of-life route.

Combined jobs. A single job can combine these options: drives destroyed on the customer's site, remaining hardware collected and transported, and a reusable part quoted for resale or buyback. These are parts of one scope and are handled by Reboot Monkey staff under that scope.

Backup. A second, briefed Reboot Monkey engineer is named as backup for every customer site.

Why Reboot Monkey for ITAD in Germany

Reboot Monkey delivers ITAD as one of a set of datacenter services performed inside data centres that other companies own and run. A customer who retires hardware can therefore deal with an operator that also handles the work around that hardware while it is in service:

  • Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

How Reboot Monkey Handles IT Asset Disposition

These terms apply to IT asset disposition in Germany.

  • Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
  • Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

Frequently Asked Questions

What does IT asset disposition cover in Germany?

In Germany, IT asset disposition covers the collection and transport of retired hardware, data wiping or physical destruction of storage media, and resale or buyback of equipment that can be used again. Electronic waste falls under the ElektroG of 2015, and personal data on retired drives falls under Regulation (EU) 2016/679. Reboot Monkey staff carry out the processing.

Where does Reboot Monkey process retired hardware in Germany?

The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.

Can retired hardware be resold or bought back in Germany?

Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.

How do I get a quote for IT asset disposition in Germany?

Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.

Request ITAD in Germany

Describe the hardware, its location and the treatment for the storage media, and Reboot Monkey will scope the job. Prices are quoted on request.

Published:

Get a quote