Skip to content

Greece · Thessaloniki

Rack and Stack in Thessaloniki

Rack and stack in Thessaloniki means installing, mounting and cabling new hardware in a data centre that another company owns and runs. Reboot Monkey engineers carry out the physical installation in your rack, including cabling, labelling and power-on checks, and quote the job on request.

Rack and Stack

  • 8

    services detailed for Thessaloniki

  • 1

    agreement for every city

Plan your Thessaloniki installation

Describe the hardware, the rack and the date it should be in service, and Reboot Monkey will quote the job.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Thessaloniki

Balkan Gate Thessaloniki stands on Stadiou in Thessaloniki. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. For a buyer in Thessaloniki, that means new servers, switches and storage can be installed in a facility you already use or have chosen, by engineers who are not tied to the building's operator. Rack and stack is the physical installation stage of a hardware deployment: installing, mounting and cabling new hardware. It starts once equipment is on site and ends when the hardware is racked, cabled, labelled and powered on. The building itself stays with the facility operator.

  • Installing and mounting new hardware in the customer's rack
  • Cabling the equipment and labelling it
  • Power-on checks once the hardware is in place

Datacenter Facilities in Thessaloniki

Data centres in Thessaloniki, ordered by the number of networks present:

  • Balkan Gate Thessaloniki (Lancom Ltd), Stadiou, 54628 Thessaloniki: 52 networks; carriers Airbeam Carrier, EXA Infrastructure, Grid Telecom, IONIAN, Inter.link and others
  • Synapsecom SNC-1 Thessaloniki (Synapsecom Telecoms S.A.), Pontou 56, 54628 Thessaloniki: 24 networks; carriers Grid Telecom and IONIAN
  • Lancom Thessaloniki DC (Lancom Ltd), Vasileos Irakliou 40, 54623 Thessaloniki: 19 networks; carriers Airbeam Carrier and NetIX
  • KLH-GSN-DC - Greekstream Networks - Thessaloniki (Ioannis Roditis trading as Greekstream Networks), Konstantinoupoleos Str., 57009 Thessaloniki: 4 networks

Our Rack and Stack Services

The scope of a rack and stack job is set by what the hardware needs to be usable. Reboot Monkey rack and stack work covers cabling, labelling and power-on checks, and quotes are on request. Prices are quoted on request and depend on the customer and the size of the job, so a first message that describes the hardware and the target rack lets the quote reflect the real work.

A typical request runs in a few steps. You describe the equipment, the rack and the date it should be in service. Reboot Monkey assigns an engineer to the customer site and names a second, briefed engineer as backup for it. The engineer mounts the hardware, runs and labels the cabling, and carries out the power-on checks. Clear labelling is the part that pays off later, because every cable can be traced by whoever works in that rack next, whether that is your own team or another Reboot Monkey engineer on a later job.

Network is handled with the same job. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Where a fibre link needs checking before it is patched, a fibre inspection scope and cleaning kit are available on request.

Rack and stack is one of several services that sit next to each other. Remote hands covers physical tasks on your instruction, smart hands covers technical work that needs diagnostic judgement and configuration knowledge, and server migration moves equipment between racks, rooms or facilities. If a new installation is followed by a move or by ongoing support, the same engineers can carry it forward.

  • Scope: cabling, labelling and power-on checks
  • Network: cross connects and carrier circuits ordered through the operator and carriers present in the facility
  • Fibre inspection scope and cleaning kit available on request
  • A second, briefed engineer named as backup for every customer site

Why Reboot Monkey

Reboot Monkey works as a vendor-neutral operator, so the hardware you rack is your choice and the installation is not shaped by a hosting product. It sells rack space, IP transit, leased IP addresses and hardware, and it installs and supports them inside facilities run by other companies. That separation is useful when you need the same standard of installation across more than one site, because the engineers follow the rules of each building without depending on a facility of their own.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That reach matters mainly when a Thessaloniki deployment is one part of a wider rollout: the same way of working, labelling and handover applies to the other sites in the plan.

For the buyer, the practical points are few. You get an engineer assigned to the job and a named backup. You get cabling that is labelled and equipment that has been checked after power-on. You get a quote that reflects the size of the job rather than a fixed package. If you want to compare scope before committing, describe the hardware and the rack in your request and Reboot Monkey will respond with what the installation would involve.

How Reboot Monkey Works

These terms apply in every facility in Thessaloniki where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Thessaloniki?

Rack and stack in Thessaloniki covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks. Reboot Monkey engineers work under the facility operator's site rules, and quotes are provided on request, based on the customer and the size of the job.

Do you work in every datacenter in Thessaloniki?

Reboot Monkey engineers work in any facility in Thessaloniki where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Thessaloniki?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Thessaloniki?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your Thessaloniki installation

Describe the hardware, the rack and the date it should be in service, and Reboot Monkey will quote the job.

Published:

Get a quote