Skip to content
Map of Hong Kong: data centres as dots, the larger cities circled

Map: Natural Earth

ITAD

ITAD in Hong Kong

IT asset disposition in Hong Kong is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff process the work in a partner's processing facility or on the customer's site.

  • 9

    of our services in Hong Kong

In depth

ITAD: 8 sections, open any to read more.

ITAD in Hong Kong: How It Works

IT asset disposition in Hong Kong is the end-of-life handling of IT hardware that a customer has retired from service. Reboot Monkey treats it as one request that runs from collection to the outcome for each asset. The retired hardware is collected at the customer's site or data centre and transported for processing, the storage media is wiped or physically destroyed, and equipment that can be used again goes to resale or buyback.

Every request rests on decisions the customer makes before collection. The first is which assets are involved and where they stand. The second is how the storage media should be treated: wiped, or destroyed on the customer's site by shredding or degaussing. The third is which equipment is a candidate for resale or buyback, which Reboot Monkey quotes case by case. Reboot Monkey staff then carry out the work, either in a partner's processing facility or on the customer's site.

ITAD covers the end of the hardware lifecycle and does not replace the services that come before it. Installing and cabling new hardware, moving equipment between racks, rooms or facilities, and removing retired hardware from a deployment are separate Reboot Monkey services, and the customer can raise them in the same conversation as the ITAD request.

Each asset ends with a defined outcome: reuse through resale or buyback, data wiping, or physical destruction of its storage media.

A request can be scheduled once the customer can supply the following, and anything still missing is settled with Reboot Monkey before collection is scheduled:

  • A list of the retired assets, with make, model and quantity where known.
  • The location of the hardware, whether the customer's own site or a data centre.
  • The instruction for storage media: wipe, shred or degauss.
  • Which equipment, if any, the customer is willing to place for resale or buyback.

E-waste Rules in Hong Kong

In Hong Kong, electronic waste falls under the Product Eco-responsibility Ordinance (Cap. 603). A business retiring servers, switches, storage arrays and loose drives therefore plans the disposal with that ordinance in view, and the customer's own legal advisers are the right source on what it requires of a given project.

Reboot Monkey's contribution is physical and logistical. The customer decides what is retired and when, and Reboot Monkey acts on that instruction: it collects the hardware at the site or data centre, transports it and processes it.

In practice the estate divides into two groups. The first is equipment that can still be used, for example servers or network devices in working order. That group is a candidate for resale or buyback, and Reboot Monkey quotes each case separately. The second is equipment that cannot be reused, or that the customer prefers not to sell, and it goes through processing as retired hardware. Stating the group for every asset in the request keeps the collection list unambiguous.

Storage media follow their own route within either group, and the customer sets the treatment for each group of drives. A server that is to be resold still carries drives. The customer decides whether those drives are wiped, so that the equipment can be reused, or destroyed physically on the customer's site by shredding or degaussing, so that the media is never reused. Physical destruction ends the life of a drive, and wiping leaves it usable.

When a deployment is being cleared altogether, the customer can combine data center decommissioning, which removes and disposes of retired hardware, with ITAD for the same equipment.

One asset list per collection keeps the record straightforward. It should name every asset that leaves the site, so that what the customer retired and what Reboot Monkey collected can be read against each other.

Personal Data on Retired Drives in Hong Kong

In Hong Kong, personal data on retired drives falls under the Personal Data (Privacy) Ordinance (Cap. 486), overseen by the Office of the Privacy Commissioner for Personal Data (PCPD).

A retired drive can still hold personal data after the system it served has been switched off. In a data centre estate the carriers are servers, storage arrays and loose drives, and a drive does not stop holding data because it has been removed from its chassis, so a drive list matters as much as a server list.

Reboot Monkey does not decide what a drive contains or what the ordinance asks of the customer. Those questions belong to the customer's data owner and legal advisers. The customer's instruction names the treatment for each group of drives, wiping or physical destruction, and Reboot Monkey staff carry it out.

The more precise the instruction, the less is left to interpretation at collection. A drive that is named by server and bay and given a treatment cannot be mistaken for one that stays in service, and a collection that follows the list leaves nothing for the engineer to interpret on site.

The PCPD oversees the ordinance, so questions about how it applies to a specific disposal belong with the customer's advisers and, if the customer chooses, with the PCPD itself.

Where the customer cannot say what a device holds, the instruction can set the stricter treatment, physical destruction, for the whole group of devices.

For drives, the request should state:

  • Which servers, storage arrays or other devices contain drives.
  • Which drives, if any, stay in service or are kept by the customer.
  • The treatment for each group of drives: wiping, shredding or degaussing.
  • Where the drives are, so that the work can be planned for the customer's own site or for a data centre.

How Collection and Destruction Work

The two processing locations are alternatives within the same request. On the customer's site, Reboot Monkey staff shred or degauss storage media. In a partner's processing facility, Reboot Monkey staff process the transported hardware, including data wiping. Both routes are carried out by Reboot Monkey staff. The request states which route applies to which assets, so drives can be destroyed on site while the remaining equipment is sent for processing.

Media destroyed on the customer's site is destroyed before the hardware is transported. Nothing is resold, wiped or destroyed unless the instruction for that asset says so. Resale or buyback applies only to equipment that can be used again; the rest of the hardware goes through processing. Each resale or buyback case is quoted on its own terms.

When the hardware stands in a data centre, the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The order of the work is the same on the customer's own site and inside a data centre.

A request moves in the following order.

  • Instruction: the customer names the assets, their location, the treatment of the storage media and any equipment that may be offered for resale or buyback.
  • Dispatch and collection: a Reboot Monkey engineer is dispatched to the customer's site or data centre and collects the retired hardware.
  • On-site destruction: where the instruction says so, storage media is destroyed physically on the customer's site by shredding or degaussing.
  • Transport: the collected hardware is transported for processing.
  • Processing: Reboot Monkey staff process the hardware, including data wiping where that is the instruction, in a partner's processing facility or on the customer's site.
  • Resale or buyback: equipment that can be used again is quoted case by case.

Data Security in Hong Kong

Data security in an ITAD job comes down to what happens to the storage media and where it happens. Reboot Monkey staff carry out data wiping, shredding and degaussing, and the customer's instruction decides which treatment applies to which media.

Shredding and degaussing take place on the customer's site, which means the media is destroyed at the customer's location. Degaussing acts on magnetic media, so the type of media in the equipment determines whether it applies. Shredding destroys the media physically, whatever its type.

Data wiping, in contrast, is a treatment of the data and not of the device. It happens during the processing of the hardware, which Reboot Monkey staff carry out in a partner's processing facility or on the customer's site.

Data can sit outside the drive bays. Servers and network devices can hold configuration or stored data in the device itself, and the customer should name such devices in the request so that they receive a treatment as well as the drives.

Equipment that holds no storage media, such as rack hardware and patch cabling, needs no media treatment, and its route is reuse through resale or buyback or processing as retired hardware. The customer still lists it so that the collection covers the whole estate.

Writing the treatment into the request, and not leaving it to the day of collection, means that the engineer and the processing staff act on the same instruction.

The choice of treatment follows what is planned for the equipment:

  • Drives that will not be reused: shredding on the customer's site.
  • Magnetic drives that are being retired: degaussing on the customer's site.
  • Drives in equipment that is a candidate for resale or buyback: wiping during processing.
  • Drives whose treatment the customer has not yet decided: raised with Reboot Monkey before collection is scheduled.

Why Reboot Monkey for ITAD in Hong Kong

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, and the services that deliver, install and support them, inside other companies' data centres. It is not a hosting company and not a datacenter owner.

Reboot Monkey also sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A customer that retires that rack can place the collection and disposal of its hardware with the same operator.

The same service range spans the whole lifecycle: rack and stack and server migration put hardware into place, remote hands, smart hands and hardware monitoring by the Reboot Monkey NOC support it while it runs, and data center decommissioning and ITAD handle its retirement.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

A second, briefed Reboot Monkey engineer is named as backup for every customer site.

The processing work is done by Reboot Monkey staff. The partner whose processing facility is used provides the place, and the work itself is carried out by Reboot Monkey staff.

The customer raises an ITAD request by contacting Reboot Monkey with the assets, their location and the treatment wanted for the storage media, and Reboot Monkey prepares the quote on that basis. A quote is prepared on request and depends on the customer and the size of the job. Resale or buyback is quoted case by case.

How Reboot Monkey Handles IT Asset Disposition

These terms apply to IT asset disposition in Hong Kong.

  • Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
  • Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

Frequently Asked Questions

What does IT asset disposition cover in Hong Kong?

IT asset disposition covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. In Hong Kong, electronic waste falls under the Product Eco-responsibility Ordinance (Cap. 603), and personal data on retired drives falls under the Personal Data (Privacy) Ordinance (Cap. 486).

Where does Reboot Monkey process retired hardware in Hong Kong?

The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.

Can retired hardware be resold or bought back in Hong Kong?

Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.

How do I get a quote for IT asset disposition in Hong Kong?

Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.

Plan the retirement of your hardware in Hong Kong

Send the asset list, the location and the treatment wanted for the storage media. Reboot Monkey prepares the quote from that.

Published:

Get a quote