Map: Natural Earth
ITAD
ITAD in India: IT Asset Disposition (ITAD)
IT asset disposition (ITAD) in India is the end-of-life handling of a company's IT hardware: collection and transport, data wiping or physical destruction of storage media, and resale or buyback of reusable equipment. Reboot Monkey staff carry out the work on the customer's site or in a partner's processing facility.
9
of our services in India
In depth
ITAD: 7 sections, open any to read more.
ITAD in India: How It Works
IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. For a company in India, that covers the servers, storage and network equipment that have been replaced, consolidated or taken out of service, and the decision about what happens to every drive inside them.
A retirement can follow a refresh, a consolidation or the closure of a room, and in each case the hardware faces the same decisions. The first decision for a CTO or IT director is therefore a scope question and not a vendor question: which hardware leaves service, where it stands, and what outcome each group of equipment should have.
The choice that shapes the job is where the processing happens. Data wiping, destruction and processing are carried out by Reboot Monkey staff, either in a partner's processing facility or on the customer's site. When storage media is destroyed on site, it is destroyed before it leaves the customer's premises. When hardware is collected and transported first, wiping and processing take place in the partner's processing facility.
Equipment that can be used again does not have to be destroyed. It can go through resale or buyback, which is quoted case by case, so the value of a batch of hardware is assessed for that batch and that customer. Storage media that the customer does not want reused follows the destruction route instead.
In the request, the customer states which parts the project needs. A project that only needs destruction of drives on site does not need transport, and a project that only needs resale does not need destruction.
A disposition job has four parts, and the customer decides how each one is handled before any hardware moves:
- Collection and transport: Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing.
- Data wiping: Reboot Monkey staff wipe the data on storage media, in a partner's processing facility or on the customer's site.
- Physical destruction: on the customer's site, storage media can be destroyed physically by shredding or degaussing.
- Resale or buyback: equipment that can be used again is quoted case by case.
E-waste Rules in India
In India, electronic waste falls under the E-Waste (Management) Rules, 2022. A decision to retire servers, switches or storage in India is therefore taken with those rules in view, and the customer's own legal and environmental staff are the readers who interpret them for the company's equipment.
Reboot Monkey's part is the physical handling of the hardware: collection at the customer's site or data centre, transport, data wiping or destruction of storage media, and the resale or buyback route for equipment that can be used again. The scope of each job is agreed with the customer before collection, so the asset list that the customer's staff have reviewed against the rules is the list that Reboot Monkey staff work from. Reboot Monkey does not interpret the rules for a customer's particular equipment; it carries out the physical work that the agreed scope describes.
The main variable in any scope is the split between reuse and destruction. Equipment that can be used again can go to resale or buyback, which is quoted case by case. Storage media that the customer does not want reused goes to wiping or to physical destruction. Both outcomes start with the same collection step at the customer's site or data centre.
Where a whole room, cage or set of racks is being emptied, ITAD sits alongside data center decommissioning, which covers removing and disposing of retired hardware. A project that empties a room can involve both services. Where only a batch of drives or a few servers are being retired, ITAD can be requested on its own.
To scope a job, Reboot Monkey needs four things from the customer:
- The site or data centre where the hardware stands, which tells Reboot Monkey whether engineers are dispatched to the customer's own premises or to a data centre.
- The equipment types and the quantity of each, as an asset list, which fixes what is collected.
- The items the customer expects to be reused and the items to be destroyed, which fixes the route each item takes.
- Any storage media that must be destroyed on site and not leave the premises, which fixes what is shredded or degaussed before collection.
Personal Data on Retired Drives in India
In India, personal data on retired drives falls under the Digital Personal Data Protection Act, 2023, overseen by the Data Protection Board of India. A retired server is not only a piece of hardware: its drives can still hold personal data, and that data stays on the drive when the machine is taken out of service.
Which drives hold personal data is knowledge that sits with the customer, so the method is set for each drive group in the scoping step and is written into the request. Drives that are to be reused are wiped. Drives that held personal data and are not to be reused can go to shredding or degaussing on site, which means the media is destroyed before it leaves the customer's premises.
A single retirement project can contain drives with different histories. The scope lists them in groups so that each group has one named method, and the engineers who collect and process the hardware work from that list.
The choice also decides what happens to the equipment afterwards. Wiped equipment can continue to resale or buyback, which is quoted case by case. Media that has been shredded or degaussed has been destroyed physically, so it leaves the job as destroyed media and not as equipment for resale.
For a CTO or IT director, the practical question is where the data is at each stage of the job. Before collection, it is on the customer's hardware at the customer's site or data centre. After on-site shredding or degaussing, the media has been destroyed physically. After collection for processing, the drives are in transport and then in a partner's processing facility, where Reboot Monkey staff carry out the wiping.
Drives that travel are collected by Reboot Monkey, which also transports them for processing. Drives that are destroyed on site do not travel at all. The customer decides which route applies to each group.
Reboot Monkey offers three ways of dealing with the data on retired drives, and the customer chooses between them for each group of drives:
- Data wiping, carried out by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Shredding on the customer's site, which destroys the storage media physically.
- Degaussing on the customer's site, which also destroys the storage media physically.
How Collection and Destruction Work
A request for ITAD in India moves through the same sequence whether the hardware stands in the customer's own premises or in a data centre. The customer's part in the flow is the request, the agreement of the scope and access to the site. Reboot Monkey staff carry out the collection, the destruction, the transport and the processing.
The boundary with neighbouring services is simple. Hardware that first has to be removed from racks, rooms or a whole facility belongs to data center decommissioning, which covers removing and disposing of retired hardware. Moving equipment that is not being retired, between racks, rooms or facilities, is server migration. ITAD starts at the point where the customer has decided that hardware leaves service.
A job that covers more than one site follows the same steps for each site, and a backup engineer is named for every customer site. Of the steps, only resale or buyback is quoted case by case; the others follow from the scope agreed with the customer.
The sequence for a job is:
- Request: the customer states where the hardware stands, what is being retired and which outcome is wanted for each group, whether wiping, on-site destruction or resale or buyback.
- Scope: Reboot Monkey staff agree the scope with the customer, including which storage media is destroyed on site and which hardware is collected whole for processing.
- Backup engineer: a second, briefed Reboot Monkey engineer is named as backup for every customer site.
- Collection: Reboot Monkey engineers are dispatched to the customer's site or data centre and collect the retired hardware. In a data centre, the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
- On-site destruction: where the scope calls for it, storage media is destroyed on the customer's site by shredding or degaussing.
- Transport and processing: Reboot Monkey transports the collected hardware for processing, and Reboot Monkey staff carry out data wiping and processing in a partner's processing facility.
- Resale or buyback: equipment that can be used again is handled through resale or buyback, quoted case by case.
Why Reboot Monkey for ITAD in India
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters, so an ITAD job concerns the physical hardware and its storage media only.
Because Reboot Monkey provides the services that deliver, install and support hardware, ITAD is the last stage of a sequence that a customer can run with one operator. During the life of the equipment, the same operator can provide:
- Rack and stack: installing, mounting and cabling new hardware.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
How Reboot Monkey Handles IT Asset Disposition
These terms apply to IT asset disposition in India.
- Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
- Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Frequently Asked Questions
What does IT asset disposition cover in India?
IT asset disposition (ITAD) in India covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey collects the retired hardware at the customer's site or data centre, and storage media can be destroyed on site by shredding or degaussing.
Where does Reboot Monkey process retired hardware in India?
The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.
Can retired hardware be resold or bought back in India?
Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.
How do I get a quote for IT asset disposition in India?
Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.
Request ITAD in India
Send the site, the equipment and the outcome wanted for each group of drives or hardware, and Reboot Monkey will quote the job.