Map: Natural Earth
ITAD
ITAD in Ireland: IT Asset Disposition
ITAD in Ireland is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff process it on the customer's site or in a partner's processing facility.
9
of our services in Ireland
In depth
ITAD: 8 sections, open any to read more.
ITAD in Ireland: How It Works
IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. In Ireland, Reboot Monkey delivers ITAD as a field service. Engineers are dispatched to the customer's site or data centre, the retired hardware is collected, and Reboot Monkey staff process it, either on the customer's site or in a partner's processing facility.
Three decisions shape every job. The first is how the storage media is handled: data wiping, or physical destruction by shredding or degaussing on the customer's site. The second is which equipment can be used again, because only that equipment is a candidate for resale or buyback, and those terms are quoted case by case. The third is where the hardware starts, whether that is the customer's own site or a rack inside a data centre run by someone else.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and not a datacenter owner.
ITAD sits next to related services. Data center decommissioning covers removing and disposing of retired hardware, and server migration covers moving equipment between racks, rooms or facilities. A customer emptying a room may need movement and disposal together, while a customer replacing a small group of servers may need only collection and disposal. ITAD can be requested on its own or alongside either service.
The service is aimed at organisations that run their own hardware, in a data centre or on their own premises, and need a defined end point for equipment that has been replaced.
E-waste Rules in Ireland
In Ireland, electronic waste falls under the European Union (Waste Electrical and Electronic Equipment) Regulations 2014. Retired servers, switches, storage arrays and drives are electronic equipment at the end of its life, so the route chosen for them is a regulated matter as well as a logistics one.
For a procurement manager, the practical consequence is that every disposal needs a named route before the hardware leaves the rack. Reboot Monkey states that route for each job: what is collected, where it is transported, and whether it is processed on the customer's site or in a partner's processing facility. The customer describes the equipment and its location when the job is requested, and the route is set from that description.
Hardware that can be used again follows a different path from hardware that cannot. Equipment that can be used again is a candidate for resale or buyback, quoted case by case. Equipment that cannot be reused is not a candidate for resale. Storage media from either group is handled by data wiping or physical destruction. Which equipment falls into which group depends on what is collected in each job, so the split is settled per job and not assumed in advance.
Questions about a customer's own obligations under the Regulations belong with the customer's legal or environmental adviser. What Reboot Monkey supplies is the physical service: collection, transport, data wiping or destruction of storage media, and resale or buyback. Keeping that boundary clear helps divide the work: the adviser interprets the rules, and Reboot Monkey carries out the physical handling.
Procurement teams that want resale value recovered should say so when the job is requested, because buyback is quoted case by case and cannot be assessed until the equipment is described. Naming the make and quantity of each item at the request stage gives the quote a concrete basis.
Personal Data on Retired Drives in Ireland
In Ireland, personal data on retired drives falls under the General Data Protection Regulation (Regulation (EU) 2016/679), overseen by the Data Protection Commission. A drive does not stop holding data when the server around it is switched off. The data stays on the media until the media is wiped or physically destroyed, which is why the handling of storage media is the central question in any ITAD job.
Reboot Monkey offers data wiping and physical destruction for the media. On the customer's site, storage media can be destroyed physically by shredding or degaussing. The customer chooses between them for each job, and the choice is made before engineers are dispatched.
The routes differ in what remains afterwards. A wiped drive remains a physical device, so equipment whose media has been wiped can still be considered for resale or buyback. Media that has been shredded or degaussed has been destroyed physically.
Scoping the job is easier when the hardware is split into groups: equipment whose drives held personal data, and equipment whose drives did not. The customer knows which systems held what, and that knowledge informs whether the media is wiped or destroyed. Resale or buyback applies only to equipment that can be used again, so the decision about the media and the decision about resale are taken together.
Obligations that the GDPR places on the customer remain a matter for the customer and its legal adviser. Reboot Monkey's part is the physical handling of the media: collecting it, transporting it where needed, and wiping or destroying it as the customer has chosen.
When the job is requested, the customer should name the person who authorises how the media is handled. Reboot Monkey engineers then act on that single instruction at collection, so the instruction on the day matches the instruction in the request.
How Collection and Destruction Work
Collection and transport come first. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. Collection is a physical field task: engineers are dispatched to the location named in the request, and that location may be the customer's own premises or a rack in a data centre.
When the hardware is in a data centre, the building belongs to someone else. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Collection in a data centre therefore follows those rules.
Transport follows collection. The hardware travels from the customer's site or data centre to the processing location. Where processing takes place on the customer's site, the transport step is not needed.
Processing happens in places the customer can choose between. Reboot Monkey staff process the equipment in a partner's processing facility or on the customer's site. Data wiping is part of that processing, and so is shredding or degaussing when the media is destroyed on the customer's site.
Processing on the customer's site places the work where the equipment already stands, while processing in a partner's processing facility follows collection and transport. The customer decides which applies when the job is scoped.
Resale or buyback is the last decision in the flow. Equipment that can be used again can be resold or bought back, and Reboot Monkey quotes the terms case by case for the equipment collected.
A single request can cover servers, network equipment and storage, and the customer states per item how its media is to be handled.
From the customer's side, the job needs three inputs: the location, the equipment to be collected, and the handling chosen for the media. Reboot Monkey takes the physical work from there: collection, transport and processing.
IT Asset Disposition Process Flow
An ITAD request in Ireland follows a fixed order, from first contact to finished processing. The order is the same whether the job is a few servers or a full room; what changes is the amount of collection and processing involved. Each step has a clear owner: the customer decides what is retired and how its media is handled, and Reboot Monkey carries out the physical work.
- Request: the customer contacts Reboot Monkey and describes the retired hardware and where it stands, whether on the customer's own site or in a data centre.
- Scoping: the handling of the storage media is agreed, either data wiping or shredding or degaussing on the customer's site, together with whether processing takes place on the customer's site or in a partner's processing facility.
- Dispatch: Reboot Monkey engineers are dispatched to the location named in the request, with the agreed handling of the media as their instruction.
- Collection and transport: the retired hardware is collected at the customer's site or data centre and transported for processing, unless processing takes place on the customer's site.
- Processing: Reboot Monkey staff wipe the data or destroy the storage media as agreed.
- Resale or buyback: equipment that can be used again is considered for resale or buyback, with the terms quoted case by case.
Why Reboot Monkey for ITAD in Ireland
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. ITAD belongs to the same range of physical datacenter services as the work that installs and supports hardware.
That range follows the life of a server. Rack and stack is installing, mounting and cabling new hardware. Remote hands and smart hands support it in service: remote hands carries out physical tasks on the customer's instruction, such as reboots, cable checks, component swaps and visual checks, and smart hands takes on technical work that needs diagnostic judgement and configuration knowledge. Hardware monitoring means the Reboot Monkey NOC monitors the customer's servers and network equipment. Server migration moves equipment, and data center decommissioning and ITAD retire it.
Network for the rack is part of the same range. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack.
A customer that already uses Reboot Monkey for any of these services, or buys rack space, IP transit, leased IP addresses or network from it, has the same operator for the retirement of that hardware. A customer that starts with ITAD can add the other services later.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. This applies to ITAD collections as it does to the other services.
For a CTO, IT director or procurement manager, the decision reduces to whether one provider can carry out the physical work end to end. In this service that work is collection, transport, wiping or destruction of the media, and resale or buyback quoted for equipment that can be used again.
How Reboot Monkey Handles IT Asset Disposition
These terms apply to IT asset disposition in Ireland.
- Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
- Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Frequently Asked Questions
What does IT asset disposition cover in Ireland?
IT asset disposition in Ireland covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. On the customer's site, storage media can be destroyed physically by shredding or degaussing. Reboot Monkey staff carry out the processing, on the customer's site or in a partner's processing facility.
Where does Reboot Monkey process retired hardware in Ireland?
The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.
Can retired hardware be resold or bought back in Ireland?
Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.
How do I get a quote for IT asset disposition in Ireland?
Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.
Request ITAD in Ireland
Describe the retired hardware, where it stands and how the storage media should be handled, and Reboot Monkey will scope the collection and processing.