Skip to content

Israel · Petah Tikva

Rack and Stack in Petah Tikva

Rack and stack in Petah Tikva means installing, mounting and cabling new hardware inside a facility that another company owns and runs. Reboot Monkey engineers carry out the physical work in the customer's rack, from cabling and labelling to power-on checks, and quotes are given on request.

Rack and Stack

  • 8

    services detailed for Petah Tikva

  • 1

    agreement for every city

Plan your rack and stack job

Send the equipment list, the target rack and the connectivity you need, and Reboot Monkey will quote the work.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Petah Tikva

MedOne PT1 (Petach Tikva) stands on Jabotinsky in Petah Tikva. For a buyer placing new servers, switches or storage in this city, the practical question is who will physically install the hardware and what the customer receives when the job is done. Reboot Monkey is a third-party datacenter services operator. It does not own or run data centres and it is not a hosting company. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. Rack and stack is the part of that work that puts new hardware into a rack: installing, mounting and cabling it. The scope covers cabling, labelling and power-on checks. That means access arrangements for a given job follow the operator's policy, and the work is planned around it from the first request.

Datacenter Facilities in Petah Tikva

Data centres in Petah Tikva, ordered by the number of networks present:

  • MedOne PT1 (Petach Tikva) (Med-1 IC-1 (1999) LTD.), 94 Jabotinsky, Petah Tikva 49517: 19 networks; carriers MedOne
  • Bezeq International Shacham Data Center (Bezeq International Ltd), 40 Shacham street, Ground Floor, 4951731 Petah Tikva: 12 networks
  • Bezeq International Sivim Data Center (Bezeq International Ltd), 6 Nevatim street, 4956104 Petah Tikva: 2 networks
  • EdgeConneX Tel Aviv (EDCTLV11) (EdgeConneX Inc.), Avshalom Gissin St. 53, 0000 Petah Tikva

Our Rack and Stack Services

A rack and stack job in Petah Tikva starts with the customer's instruction: what hardware is arriving, which rack it goes into and how it should be connected. Reboot Monkey engineers are dispatched to the customer's facility to carry out the installation. The work breaks down into the following parts.

  • Installing and mounting new servers, switches and other equipment in the customer's rack.
  • Cabling the hardware, with every cable labelled so that it can be traced later by your own team or by anyone supporting the rack.
  • Power-on checks once the equipment is installed and cabled, so the customer knows the hardware starts as expected before the engineer leaves.
  • Network connectivity for the rack: Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack.
  • Fibre inspection and cleaning, with a fibre inspection scope and cleaning kit available on request.

Why Reboot Monkey

Rack and stack is often one step in a larger sequence. New hardware may arrive as part of a server migration, replace equipment that is being retired, or be added to a rack that already carries production traffic. Because Reboot Monkey also covers remote hands, smart hands, server migration, data center decommissioning, IT asset disposition and hardware monitoring, the same operator can take the job on from installation to later support without the customer briefing a new supplier.

Continuity on the day matters to a procurement manager or IT director who cannot be in the building. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a single absence does not stop a scheduled installation. Reboot Monkey is vendor-neutral and sells hardware, rack space and connectivity alongside the installation work, which lets one request cover what is being installed, where it goes and how it is connected.

Prices are quoted on request and depend on the customer and the size of the job. To scope a job, send the equipment list, the target rack and the connectivity needed through the contact form. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, so a deployment in Petah Tikva can sit inside a wider rollout under one point of contact.

How Reboot Monkey Works

These terms apply in every facility in Petah Tikva where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Petah Tikva?

Rack and stack in Petah Tikva covers installing, mounting and cabling new hardware in the customer's rack. The work includes cabling, labelling and power-on checks. Reboot Monkey engineers carry it out under the facility operator's site rules, and quotes are given on request. Network connectivity for the rack can be ordered alongside the installation.

Do you work in every datacenter in Petah Tikva?

Reboot Monkey engineers work in any facility in Petah Tikva where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Petah Tikva?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Petah Tikva?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your rack and stack job

Send the equipment list, the target rack and the connectivity you need, and Reboot Monkey will quote the work.

Published:

Get a quote