Israel · Petah Tikva
Smart Hands in Petah Tikva
Smart hands is technical work inside the data center that needs diagnostic judgement and configuration knowledge, beyond a simple reboot. Reboot Monkey provides on-site IT support in Petah Tikva data centers, carried out by field engineers who work under the facility operator's site rules.
In Smart Hands
- Smart Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- ITADon request
Smart Hands
8
services detailed for Petah Tikva
1
agreement for every city
Plan Your Smart Hands Request
Describe the task or fault and Reboot Monkey will scope the work and quote it.
In depth
Smart Hands: 6 sections, open any to read more.
Smart Hands in Petah Tikva
MedOne PT1 (Petach Tikva) stands on Jabotinsky in Petah Tikva. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own the buildings it works in. Smart hands sits between two other services. Remote hands covers physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. When a fault has no obvious cause, or a change depends on how the equipment is set up, the engineer is expected to investigate and decide, not only to follow a one-line instruction. For a buyer, this means the work in Petah Tikva is planned around the operator's access procedures, and the request is scoped with that in mind from the first contact.
Datacenter Facilities in Petah Tikva
Data centres in Petah Tikva, ordered by the number of networks present:
- MedOne PT1 (Petach Tikva) (Med-1 IC-1 (1999) LTD.), 94 Jabotinsky, Petah Tikva 49517: 19 networks; carriers MedOne
- Bezeq International Shacham Data Center (Bezeq International Ltd), 40 Shacham street, Ground Floor, 4951731 Petah Tikva: 12 networks
- Bezeq International Sivim Data Center (Bezeq International Ltd), 6 Nevatim street, 4956104 Petah Tikva: 2 networks
- EdgeConneX Tel Aviv (EDCTLV11) (EdgeConneX Inc.), Avshalom Gissin St. 53, 0000 Petah Tikva
Our Smart Hands Services
A smart hands request in Petah Tikva starts with a description of the task or the fault. Reboot Monkey scopes the work, assigns a field engineer and names a second, briefed engineer as backup for your site, so that a single absence does not leave the job without cover. Prices are quoted on request and depend on the customer and the size of the job.
The tasks that fall under smart hands are those where judgement and configuration knowledge matter. Typical examples that follow from the service definition include:
- Diagnosing a server or network device that is not responding, and deciding whether the fault is in the hardware, the cabling or the configuration.
- Carrying out a configuration change on equipment in your rack under your direction.
- Installing and patching cabling in your rack for the network Reboot Monkey sells, after the cross connects and carrier circuits have been ordered from the facility operator and the carriers present in the facility.
- Inspecting and cleaning fibre connections with a fibre inspection scope and cleaning kit, available on request.
- Moving equipment between racks, rooms or facilities as part of a server migration, or installing, mounting and cabling new hardware as rack and stack.
Why Reboot Monkey
Reboot Monkey works as a vendor-neutral operator inside other companies' data centers, so a Petah Tikva request is handled the same way as one anywhere else in its network. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations, which means a company with equipment in several countries can raise requests through one supplier instead of arranging local contractors in each place.
For day-to-day operation, the practical points are these. The engineer who works in your rack is a Reboot Monkey field engineer, not a facility employee, and the backup engineer is briefed on your site in advance. Where a problem needs more than one pair of hands, such as a fault that also touches monitored equipment, the Reboot Monkey NOC can monitor your servers and network equipment as a separate hardware monitoring service, so on-site work and monitoring are coordinated by the same company.
The work is bounded by what the operator allows. Power, cooling and building work stay with the facility operator, and Reboot Monkey engineers do not take them on. This keeps responsibilities clear: the operator runs the building, and Reboot Monkey handles the equipment, the cabling and the technical tasks you ask for inside your rack space.
How Reboot Monkey Works
These terms apply in every facility in Petah Tikva where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does smart hands cover in Petah Tikva?
Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, carried out by Reboot Monkey field engineers inside the data center. Simple physical tasks such as reboots, cable checks, component swaps and visual checks fall under remote hands. Prices are quoted on request and depend on the customer and the size of the job.
Do you provide on-site IT support in Petah Tikva data centers?
Yes. A request begins with a description of the task or fault. A second, briefed Reboot Monkey engineer is named as backup for every customer site. Reboot Monkey does not own the data centers, and the operator runs power, cooling and access.
Do you work in every datacenter in Petah Tikva?
Reboot Monkey engineers work in any facility in Petah Tikva where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Petah Tikva?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with smart hands in Petah Tikva?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Plan Your Smart Hands Request
Describe the task or fault and Reboot Monkey will scope the work and quote it.