Map: Natural Earth
ITAD
ITAD in Japan: IT Asset Disposition by Reboot Monkey
ITAD in Japan covers the collection of retired IT hardware at the customer's site or data centre, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff process the hardware in a partner's processing facility or on the customer's site.
9
of our services in Japan
In depth
ITAD: 8 sections, open any to read more.
ITAD in Japan: How It Works
Retiring IT hardware raises practical questions: who collects it, where the data on its drives is wiped or destroyed, and what happens to equipment that can still be used. IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again.
Reboot Monkey is a third-party datacenter services operator. It works inside data centres that other companies own and run, and it is not a hosting company or a datacenter owner. ITAD is the end-of-life service in its range, and in ITAD the hardware is the customer's and Reboot Monkey acts on the customer's instruction.
The work breaks down as follows. Collection takes place at the customer's site or data centre, where Reboot Monkey collects the retired hardware. Transport carries it to processing. Processing means data wiping or, where the customer wants the media physically destroyed, shredding or degaussing on the customer's site. Resale or buyback applies to equipment that can be used again and is quoted case by case.
Reboot Monkey staff carry out all of this processing, either in a partner's processing facility or on the customer's own site.
Before sending a request, a buyer settles which equipment is leaving and whether its storage media should be wiped or physically destroyed. A clear answer to both gives Reboot Monkey what it needs to scope the job and to quote resale or buyback case by case.
Hardware kept in a data centre is named in the request by data centre as well as by equipment. Data center decommissioning, the removal and disposal of retired hardware, is a separate service in the same range.
A request can cover a single retired server or a larger set of retired equipment. The quote, and any resale or buyback offer, is built from the equipment actually listed.
E-waste Rules in Japan
In Japan, electronic waste falls under the Act on Promotion of Recycling of Small Waste Electrical and Electronic Equipment (No. 57) of 2012. A buyer in Japan who plans the disposal of retired IT hardware works with that Act as the reference for the equipment itself, as distinct from the data stored on it.
What the Act requires of a particular company is a matter for that company's legal and environmental staff, and Reboot Monkey does not interpret it on a customer's behalf. Reboot Monkey's contribution is physical and operational. It collects the hardware at the customer's site or data centre, transports it, has Reboot Monkey staff process it, and quotes resale or buyback for whatever can be used again.
Each retired asset follows a path that the customer decides before the job starts. Equipment that can be used again can go to resale or buyback, which is quoted case by case. Equipment the customer does not want to resell is handled as disposal. On either path the storage media need their own decision: wiped, or physically destroyed. The same collection and transport serve both paths, so the choice is a choice of outcome, not of provider.
A customer with a mixed estate can state the path per item. Servers designated for buyback and drives designated for shredding on the customer's site, for example, are separate lines in the same request.
The hardware can stand at the customer's own site or in a data centre. Reboot Monkey collects it at either and transports it for processing, whichever path each item follows.
The request needs the list of equipment, the place where it stands, and the intended path for each item. Reboot Monkey uses that list to scope the collection and to quote resale or buyback case by case.
Personal Data on Retired Drives in Japan
In Japan, personal data on retired drives falls under the Act on the Protection of Personal Information (APPI) of 2003, overseen by the Personal Information Protection Commission (PPC). A retired drive is a data-protection matter as well as an equipment matter, and the decision about its contents belongs to the customer.
Reboot Monkey does not interpret the APPI or comment on the PPC's oversight. It carries out the method the customer selects for the storage media, which is either data wiping or physical destruction. Where the customer's own data-protection staff set the policy, the request is where that policy becomes an instruction for each device.
Physical destruction can take place on the customer's site, where storage media can be destroyed by shredding or degaussing. Data wiping is processed by Reboot Monkey staff, in a partner's processing facility or on the customer's site. Collection of the retired hardware happens at the customer's site or data centre, and transport takes it on for processing.
A request involving personal data should state, for each device, whether it contains storage media and which treatment applies: wiping or physical destruction. Equipment the customer intends to sell is listed as well, because resale or buyback applies to equipment that can be used again and the storage media inside it still need a treatment.
The choice also bears on where Reboot Monkey staff do the work. On-site destruction is carried out on the customer's site. Wiping can be carried out there or in a partner's processing facility, and the request states which the customer wants.
Because the personal data question and the equipment question have different legal references, the request keeps them apart: the data-protection decision is stated for each storage medium, and the resale or buyback decision for each asset.
How Collection and Destruction Work
Collection is the first physical step of the work. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. The request names the place where each item stands.
Where the hardware stands in a data centre, the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Processing is carried out by Reboot Monkey staff. The location is either a partner's processing facility or the customer's site. Storage media receive data wiping or physical destruction, and physical destruction on the customer's site is by shredding or degaussing.
Choosing physical destruction on the customer's site means the media are destroyed by shredding or degaussing at the location where they were retired. Choosing processing in a partner's processing facility means the hardware is collected and transported there first.
Equipment that can be used again takes a different route from equipment that is destroyed: it goes to resale or buyback. Reboot Monkey quotes resale or buyback case by case, so each customer's hardware is assessed on its own.
These points are worth settling in the request, because they decide how the work is carried out:
- Whether the media should be destroyed on the customer's site or processed elsewhere
- Whether any equipment is intended for resale or buyback
- Which data centre or site each item stands in
IT Asset Disposition Process Flow
A request for ITAD moves through these steps in order:
- Request. The customer describes the retired equipment, the site or data centre where it stands, whether each item is intended for resale or buyback, and whether storage media are to be wiped or physically destroyed.
- Quote. Reboot Monkey quotes the job. Prices are quoted on request and depend on the customer and the size of the job, and resale or buyback is quoted case by case.
- Collection. Reboot Monkey collects the retired hardware at the customer's site or data centre.
- Transport. The hardware is transported for processing.
- Processing. Reboot Monkey staff process the hardware in a partner's processing facility or on the customer's site: data wiping, or physical destruction by shredding or degaussing on the customer's site.
- Resale or buyback. Equipment that can be used again is handled as quoted.
Why Reboot Monkey for ITAD in Japan
Reboot Monkey sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them. Alongside ITAD, the range includes these services:
- Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks)
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge
- Rack and stack: installing, mounting and cabling new hardware
- Server migration: moving equipment between racks, rooms or facilities
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC
How Reboot Monkey Handles IT Asset Disposition
These terms apply to IT asset disposition in Japan.
- Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
- Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Frequently Asked Questions
What does IT asset disposition cover in Japan?
IT asset disposition in Japan covers the collection and transport of retired IT hardware from the customer's site or data centre, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. On the customer's site, storage media can be destroyed by shredding or degaussing. Electronic waste falls under the 2012 Act (No. 57), and personal data on retired drives under the APPI of 2003.
Where does Reboot Monkey process retired hardware in Japan?
The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.
Can retired hardware be resold or bought back in Japan?
Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.
How do I get a quote for IT asset disposition in Japan?
Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.
Plan your ITAD job
Send Reboot Monkey the equipment list, its location and the intended treatment of the storage media, and receive a quote for the job.