Skip to content

Kenya · Nairobi

Smart Hands in Nairobi

Smart hands is technical work inside the data center that needs diagnostic judgement and configuration knowledge, beyond a simple reboot or cable swap. Reboot Monkey engineers carry out this work for equipment in Nairobi, and the same on-site IT support in Nairobi data centers covers installation, patching and troubleshooting on your instruction.

Smart Hands

  • 8

    services detailed for Nairobi

  • 1

    agreement for every city

Request Smart Hands in Nairobi

Describe the task and the rack location, and Reboot Monkey will scope the request and quote it.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Nairobi

Africa Data Centres, Nairobi NBO1, Kenya stands on Sameer Business Park in Nairobi. For a CTO or IT director with equipment in the city, the practical question is who can work on that equipment when something needs more than a power cycle. Smart hands answers it: technical work that needs diagnostic judgement and configuration knowledge, carried out inside the facility by an engineer you can instruct remotely.

Reboot Monkey is a third-party datacenter services operator. It does not own or run any data center. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centers that other companies own and run. That position matters for Nairobi buyers because the work is done for you in a building you may not staff yourself, without Reboot Monkey being tied to a single facility or a single hardware brand.

Remote hands and smart hands are different requests. Remote hands covers physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers the work where the engineer has to read a symptom, decide what to test next and change a configuration. If you are unsure which one your task needs, describe the fault or the change when you contact Reboot Monkey and the request is scoped from that description.

Datacenter Facilities in Nairobi

Data centres in Nairobi, ordered by the number of networks present:

  • Africa Data Centres, Nairobi NBO1, Kenya, Sameer Business Park, Mombasa Road, Nairobi: 130 networks; carriers Orange Wholesale International - EVPL
  • iXAfrica NBOX1 (Nairobi X One) (IXAfrica Data Centre), Cabanas, Mombasa Road., PO BOX 41648-00100, Nairobi: 43 networks
  • PAIX Nairobi (PAIX Data Centres), Britam Tower, Hospital Road, Upperhill, Nairobi: 41 networks
  • Icolo (Atima Creations LTD), LRC Road Off Langata South Road Karen, Nairobi: 3 networks
  • Telkom - Milimani Data Center - Nairobi (Telkom Kenya), Telkom Plaza, Ralph Bunch Road - Nairobi, Milimani DC - Bishop Road, 00100: 2 networks
  • Telkom - Telephone House - Nairobi (Telkom Kenya), Koinange Street, Posta Street, 00100 Nairobi: 1 network

Our Smart Hands Services

A smart hands request in Nairobi starts with your description of the task and ends with a report on what was done. The engineer dispatched to the facility works from your instructions, and the typical jobs fall into a short list of categories.

  • Fault diagnosis on servers and network equipment, where the engineer tests, isolates and reports the cause rather than only restarting the device.
  • Installation, mounting and cabling of new hardware in your rack (rack and stack), including patching to the network.
  • Moving equipment between racks, rooms or facilities (server migration), planned with you before the work starts.
  • Cross connects and carrier circuits: Reboot Monkey orders them from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in your rack.
  • Fibre checks: a fibre inspection scope and cleaning kit are available on request when a link needs to be inspected or cleaned before it is patched.
  • Removal of retired hardware (data center decommissioning) and, where data must be destroyed, IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, with resale or buyback quoted case by case.

Why Reboot Monkey

Reboot Monkey works in other companies' buildings, so the way a job is handled matters more than the building. A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the first engineer is unavailable, the work does not wait for a new person to be found and introduced to your equipment. In practice, access and any restrictions on what can be done in the halls are set by the operator, and Reboot Monkey plans each job inside those rules. When the work involves monitoring rather than hands on site, the Reboot Monkey NOC monitors the customer's servers and network equipment, so a fault can be raised and then handed to an engineer in the facility. Prices are quoted on request and depend on the customer and the size of the job. To start, send the task, the rack location and the equipment involved through the contact page, and the request is scoped from that information.

How Reboot Monkey Works

These terms apply in every facility in Nairobi where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Nairobi?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, carried out by a Reboot Monkey engineer inside the facility. In Nairobi that includes fault diagnosis, installing and cabling hardware, patching cross connects, moving equipment and decommissioning. Simple physical tasks such as reboots and cable checks fall under remote hands.

Do you provide on-site IT support in Nairobi data centers?

Yes. Reboot Monkey engineers are dispatched to your equipment in the facility and work on your instruction, under the facility operator's site rules. They install and patch cabling, diagnose faults and carry out changes. A second, briefed engineer is named as backup for every customer site. Send the task and rack location to start a request.

Do you work in every datacenter in Nairobi?

Reboot Monkey engineers work in any facility in Nairobi where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Nairobi?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Nairobi?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Nairobi

Describe the task and the rack location, and Reboot Monkey will scope the request and quote it.

Published:

Get a quote